Shake table test and numerical analyses of a thin-walled Cold-Formed Steel structure: Part 1 — Investigation of the structural skeleton without claddings

[1]  Y. Hu,et al.  Seismic Damage Assessment and Shaking-Table Test Validation of Midrise Cold-Formed Steel Composite Shear Wall Buildings , 2022, Journal of Structural Engineering.

[2]  M. Kotełko,et al.  Ultimate and post-ultimate behaviour of thin-walled cold-formed steel open-section members under eccentric compression. Part II: Experimental study , 2022, Thin-Walled Structures.

[3]  I. Toma,et al.  Experimental Investigation and Numerical Simulation of C-Shape Thin-Walled Steel Profile Joints , 2021, Buildings.

[4]  M. Kotełko,et al.  Ultimate and post-ultimate behaviour of thin-walled cold-formed steel open-section members under eccentric compression. Part I: Collapse mechanisms database (theoretical study) , 2021, Thin-Walled Structures.

[5]  Raffaele Landolfo,et al.  Seismic performance evaluation of CFS strap-braced buildings through experimental tests , 2021 .

[6]  Zhuangnan Zhang,et al.  Experimental study on shear behavior of cold-formed steel shear walls with bracket , 2021 .

[7]  Yu Shi,et al.  Shear resistance of cold-formed thin-walled steel inter-story connections , 2021 .

[8]  Li-zhong Jiang,et al.  Seismic responses and damage assessment of a mid-rise cold-formed steel building under far-fault and near-fault ground motions , 2021 .

[9]  B. Radu,et al.  Experimental and numerical investigations on built-up cold-formed steel beams using resistance spot welding , 2021 .

[10]  Dong-Hyeon Shin,et al.  Shake table test program of cold-formed steel in-plane partition walls , 2021 .

[11]  Bijan Samali,et al.  Shake Table Testing of Standard Cold-Formed Steel Storage Rack , 2021, Applied Sciences.

[12]  G. Charles Clifton,et al.  Three-storey modular steel building with a novel slider device: Shake table tests on a scaled down model and numerical investigation , 2020 .

[13]  Xiang Wang,et al.  Evolution of modal characteristics of a mid‐rise cold‐formed steel building during construction and earthquake testing , 2020, Earthquake Engineering & Structural Dynamics.

[14]  Raffaele Landolfo,et al.  Numerical modelling of CFS two-storey sheathing-braced building under shaking-table excitations , 2020 .

[15]  Xiang Wang,et al.  Seismic Performance of Symmetric Unfinished CFS In-Line Wall Systems , 2020 .

[16]  Liqiang Jiang,et al.  Redundancy of a mid-rise CFS composite shear wall building based on seismic response sensitivity analysis , 2019 .

[17]  Xu-hong Zhou,et al.  Seismic performance of prefabricated sheathed cold-formed thin-walled steel buildings: Shake table test and numerical analyses , 2019 .

[18]  R. Landolfo,et al.  Shake table testing and numerical modelling of LWS strap-braced structures for seismic performance evaluation , 2019, CENTRAL EUROPEAN SYMPOSIUM ON THERMOPHYSICS 2019 (CEST).

[19]  Hamid R. Ronagh,et al.  Numerical models for lateral behaviour analysis of cold-formed steel framed walls: State of the art, evaluation and challenges , 2019, Thin-Walled Structures.

[20]  Raffaele Landolfo,et al.  Seismic Behaviour of Strap-Braced LWS Structures: Shake Table Testing and Numerical Modelling , 2019, IOP Conference Series: Materials Science and Engineering.

[21]  Wanqian Wang,et al.  Cyclic test and numerical analytical assessment of cold-formed thin-walled steel shear walls using tube truss , 2019, Thin-Walled Structures.

[22]  Raffaele Landolfo,et al.  Experimental seismic performance evaluation of modular lightweight steel buildings within the ELISSA project , 2018, Earthquake Engineering & Structural Dynamics.

[23]  S. Ozdemir,et al.  Analytical and Experimental Modal Analysis of a Model Cold Formed Steel (CFS) Structures Using Microtremor Excitation , 2018, Seismic Isolation, Structural Health Monitoring, and Performance Based Seismic Design in Earthquake Engineering.

[24]  R. Landolfo,et al.  Seismic Behaviour of Sheathed CFS Buildings: Shake-Table Testing and Numerical Modelling , 2018 .

[25]  R. Landolfo,et al.  Shake Table Tests of Structures with CFS Strap-Braced Stud Walls , 2018 .

[26]  Raffaele Landolfo,et al.  Shake table tests of a full-scale two-story sheathing-braced cold-formed steel building , 2017 .

[27]  Raffaele Landolfo,et al.  Seismic response of CFS shear walls sheathed with nailed gypsum panels: Experimental tests , 2017 .

[28]  Serdar Soyoz,et al.  Dynamic and cyclic response of a full-scale 2-storey cold-formed steel structure with and without infill materials , 2017, Bulletin of Earthquake Engineering.

[29]  Stephen G. Buonopane,et al.  Seismic Response and Engineering of Cold-formed Steel Framed Buildings , 2016 .

[30]  Stephen G. Buonopane,et al.  Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. II: Subsystem-Level Response , 2016 .

[31]  Narutoshi Nakata,et al.  Seismic Design of Multi-Story Cold-Formed Steel Buildings: The CFS-NEES Archetype Building , 2012 .

[32]  Benjamin W. Schafer,et al.  Cold‐formed steel structures around the world , 2011 .

[33]  Dan Dubina,et al.  Behavior and performance of cold-formed steel-framed houses under seismic action , 2008 .

[34]  Dan Dubina,et al.  Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading. Part II: Numerical modelling and performance analysis , 2004 .

[35]  David A. Nethercot,et al.  Moment redistribution in cold-formed steel continuous beams , 2016 .

[36]  D. P. Stoten,et al.  The Contribution Of Shaking Tables To Earthquake Engineering , 2012 .

[37]  Mihai Budescu,et al.  Seismic Behaviour of an Experimental Model Made of Thin-Walled Cold Formed Steel Profiles - Hardell Structures , 2009 .

[38]  Barry J. Goodno,et al.  Seismic evaluation of a low rise steel building , 1986 .