Microstructure; bonding strength and thickness ratio of Al/Mg/Al alloy laminated composites prepared by hot rolling

[1]  M. R. Toroghinejad,et al.  Investigation of the parameters of the cold roll bonding (CRB) process , 2010 .

[2]  B. Chin,et al.  Microstructure and properties of magnesium AZ31B–aluminum 7075 explosively welded composite plate , 2010 .

[3]  V. L. Acoff,et al.  Titanium aluminide sheets made using roll bonding and reaction annealing , 2010 .

[4]  Mechanical properties of an Al/Mg/Al trilaminated composite fabricated by hot rolling , 2010 .

[5]  M. R. Toroghinejad,et al.  Effects of processing parameters on the bond strength of Cu/Cu roll-bonded strips , 2010 .

[6]  L. M. Zhao,et al.  Effect of interlayer composition on the microstructure and strength of diffusion bonded Mg/Al joint , 2009 .

[7]  E. Maawad,et al.  Texture evolution of the Mg/Al laminated composite fabricated by the accumulative roll bonding , 2009 .

[8]  H. D. Manesh,et al.  Effective parameters on bonding strength of roll bonded Al/St/Al multilayer strips , 2009 .

[9]  S. H. Seyedein,et al.  Mathematical modeling and simulation of the interface region of a tri-layer composite material, brass-steel-brass, produced by cold rolling , 2009 .

[10]  M. S. Nezhad,et al.  A study of joint quality of aluminum and low carbon steel strips by warm rolling , 2009 .

[11]  V. Balasubramanian,et al.  Developing diffusion bonding windows for joining AZ31B magnesium–AA2024 aluminium alloys , 2009 .

[12]  Fencheng Liu,et al.  Bonding of Mg and Al with Mg–Al eutectic alloy and its application in aluminum coating on magnesium , 2009 .

[13]  A. Kokabi,et al.  The influence of roll bonding parameters on the bond strength of Al-3003/Zn soldering sheets , 2008 .

[14]  L. M. Zhao,et al.  Effect of Zn alloy interlayer on interface microstructure and strength of diffusion-bonded Mg–Al joints , 2008 .

[15]  H. D. Manesh,et al.  Investigation of roll bonding between aluminum alloy strips , 2008 .

[16]  M. Tsukahara,et al.  Hydrogen storage properties of Mg/Cu and Mg/Pd laminate composites and metallographic structure , 2007 .

[17]  H. G. Kang,et al.  A combined texture and FEM study of strain states during roll-cladding of five-ply stainless steel/aluminum composites , 2007 .

[18]  L. Parashkevova,et al.  Thermomechanical modelling of hot extrusion of Al-alloys, followed by cooling on the press , 2006 .

[19]  G. Tzou,et al.  Analysis of asymmetrical cold and hot bond rolling of unbounded clad sheet under constant shear friction , 2006 .

[20]  S. Hanada,et al.  Fabrication of pure Al/Mg-Li alloy clad plate and its mechanical properties , 2005 .

[21]  M. Tsukahara,et al.  Preparation and hydrogen storage properties of MgNiMg 2Ni laminate composites , 2005 .

[22]  H. D. Manesh,et al.  The effect of annealing treatment on mechanical properties of aluminum clad steel sheet , 2003 .

[23]  G. Tzou,et al.  Analytical modified model of the cold bond rolling of unbounded double-layers sheet considering hybrid friction , 2003 .

[24]  Terry Sheppard,et al.  Simulation and control of microstructure evolution during hot extrusion of hard aluminium alloys , 2003 .

[25]  A. K. Tieu,et al.  Analytical approach to the cold-and-hot bond rolling of sandwich sheet with outer hard and inner soft layers , 2002 .

[26]  J. An,et al.  Hot roll bonding of Al-Pb-bearing alloy strips and steel sheets using an aluminized interlayer , 2001 .

[27]  J. Yong,et al.  Analysis of clad sheet bonding by cold rolling , 2000 .

[28]  Hung-Jen Lee,et al.  Analysis of sandwich sheet rolling by stream function method , 1995 .

[29]  D. R. Hose,et al.  Experimental and theoretical stress analysis of multi-mitred lined glass reinforced plastic pipe bends , 1995 .

[30]  Manabu Kiuchi,et al.  Mathematical Simulation of Clad Sheet Rolling and Sandtvich Sheet Holling , 1992 .

[31]  Edward L Cussler,et al.  Diffusion: Mass Transfer in Fluid Systems , 1984 .