A mechanical-electrical finite element method model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells

Abstract Contact resistance between the bipolar plate (BPP) and the gas diffusion layer (GDL) plays a significant role on the power loss in a proton exchange membrane (PEM) fuel cell. There are two types of contact behavior at the interface of the BPP and GDL, which are the mechanical one and the electrical one. Furthermore, the electrical contact behavior is dependent on the mechanical one. Thus, prediction of the contact resistance is a coupled mechanical–electrical problem. The current FEM models for contact resistance estimation can only simulate the mechanical contact behavior and moreover they are based on the assumption that the contact surface is equipotential, which is not the case in a real BPP/GDL assembly due to the round corner and margin of the BPP. In this study, a mechanical–electrical FEM model was developed to predict the contact resistance between the BPP and GDL based on the experimental interfacial contact resistivity. At first, the interfacial contact resistivity was obtained by experimentally measuring the contact resistance between the GDL and a flat graphite plate of the same material and processing conditions as the BPP. Then, with the interfacial contact resistivity, the mechanical and electrical contact behaviors were defined and the potential distribution of the BPP/GDL assembly was analyzed using the mechanical–electrical FEM model. At last, the contact resistance was calculated according to the potential drop and the current of the contact surface. The numerical results were validated by comparing with those of the model reported previously. The influence of the round corner of the BPP on the contact resistance was also studied and it is found that there exists an optimal round corner that can minimize the contact resistance. This model is beneficial in understanding the mechanical and electrical contact behaviors between the BPP and GDL, and can be used to predict the contact resistance in a new BPP/GDL assembly.

[1]  Chengwei Wu,et al.  Influence of clamping force on the performance of PEMFCs , 2007 .

[2]  A. Majumdar,et al.  Fractal characterization and simulation of rough surfaces , 1990 .

[3]  Andrew Higier,et al.  Effect of gas diffusion layer compression on PEM fuel cell performance , 2006 .

[4]  R. Mallant,et al.  Use of stainless steel for cost competitive bipolar plates in the SPFC , 2000 .

[5]  R. Pitchumani,et al.  MEASUREMENT AND PREDICTION OF ELECTRICAL CONTACT RESISTANCE BETWEEN GAS DIFFUSION LAYERS AND BIPOLAR PLATE FOR APPLICATIONS TO PEM FUEL CELLS , 2004 .

[6]  Albert J. Shih,et al.  A micro-scale model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells , 2007 .

[7]  Heli Wang,et al.  Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells , 2003 .

[8]  J. Greenwood.  Constriction resistance and the real area of contact , 1966 .

[9]  Göran Sundholm,et al.  A Novel Polymer Electrolyte Fuel Cell for Laboratory Investigations and in situ Contact Resistance Measurements , 2001 .

[10]  Paul Leonard Adcock,et al.  Bipolar plate materials for solid polymer fuel cells , 2000 .

[11]  Jenn-Jiang Hwang,et al.  Effect of clamping pressure on the performance of a PEM fuel cell , 2007 .

[12]  Ying Liu,et al.  Estimation of contact resistance in proton exchange membrane fuel cells , 2006 .

[13]  Chengwei Wu,et al.  Numerical study on the compression effect of gas diffusion layer on PEMFC performance , 2007 .

[14]  J. W. Van Zee,et al.  The effects of compression and gas diffusion layers on the performance of a PEM fuel cell , 1999 .

[15]  B. Bhushan,et al.  Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces , 1990 .

[16]  Ching-Han Huang,et al.  Analyses of the fuel cell stack assembly pressure , 2005 .

[17]  Chengwei Wu,et al.  Contact resistance prediction and structure optimization of bipolar plates , 2006 .

[18]  J. Greenwood,et al.  Contact of nominally flat surfaces , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[19]  Gregor Hoogers,et al.  Fuel Cell Technology Handbook , 2002 .

[20]  M. Cooper,et al.  Thermal contact conductance , 1969 .

[21]  B. Bhushan,et al.  Fractal Model of Elastic-Plastic Contact Between Rough Surfaces , 1991 .