The influence of UV irradiation on the surface of chitosan films

Abstract The surface properties of chitosan films before and after UV-irradiation ( λ  = 254 nm and 248 nm, respectively) were investigated using the technique of scanning electron microscopy (SEM) and by means of contact angle measurements allowing the calculation of surface free energy. Moreover, in order to determine the film mass changes, quartz crystal microbalance (QCM) measurements were performed. Measurements of the contact angle for diiodomethane (D), formamide (F) and glycerol (G) on the surface of chitosan films were made. The chemical and structural changes during UV irradiation were studied by FTIR–ATR spectroscopy. The contact angle and the surface free energy were altered by UV irradiation of chitosan films. The microscopy images have shown that the KrF excimer laser irradiation caused visible damages on the surface in comparison with the surface exposed to the mercury UV lamp. The surface modification of chitosan films can be achieved using both, the low intensity UV lamp and the excimer laser.

[1]  Hiroshi Mitomo,et al.  Degradation of chitosan and sodium alginate by gamma radiation, sonochemical and ultraviolet methods , 2005 .

[2]  Guillet.  Polymer Photophysics and Photochemistry , 1985 .

[3]  S. Elder,et al.  Potential use of chitosan as a cell scaffold material for cartilage tissue engineering. , 2002, Tissue engineering.

[4]  M. Struszczyk.  Chitin and chitosan. Part II. Applications of chitosan , 2002 .

[5]  D. Castner,et al.  Biomedical surface science: Foundations to frontiers , 2002 .

[6]  Peter E. Dyer,et al.  Excimer laser polymer ablation: twenty years on , 2003 .

[7]  Alina Sionkowska,et al.  The influence of UV irradiation on the mechanical properties of chitosan/poly(vinyl pyrrolidone) blends , 2005 .

[8]  Vesselin N. Paunov,et al.  157-nm laser micromachining of N-BK7 glass and replication for microcontact printing , 2003 .

[9]  Qun Huang,et al.  Study on the synergetic degradation of chitosan with ultraviolet light and hydrogen peroxide. , 2005, Carbohydrate research.

[10]  A. Adamson.  Physical chemistry of surfaces , 1960 .

[11]  C. Kennedy,et al.  Molecular interactions in collagen and chitosan blends. , 2004, Biomaterials.

[12]  S. Chin,et al.  The use of intense femtosecond laser pulses for the fragmentation of chitosan , 1999 .

[13]  Torsten Blunk,et al.  Does UV irradiation affect polymer properties relevant to tissue engineering , 2001 .

[14]  M. H. Gil,et al.  Study on chemical, UV and gamma radiation-induced grafting of 2-hydroxyethyl methacrylate onto chitosan , 2005 .

[15]  Alina Sionkowska,et al.  Surface foaming of collagen, chitosan and other biopolymer films by KrF excimer laser ablation in the photomechanical regime , 2005 .

[16]  C. Kennedy,et al.  The photochemical stability of collagen - Chitosan blends , 2004 .