Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly

A sensitive polyaniline (PANI)/titanium dioxide (TiO2) based toxic gas sensor deposited on a quartz crystal microbalance (QCM) chip was fabricated and developed through electrostatic layer-by-layer (LbL) self-assembly (SA) with polyaniline and titanium dioxide sol as original materials. The synthesis process and the obtained nanocomposite were confirmed through a home-made measurement set-up, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopic (FTIR) and X-ray diffraction (XRD), which demonstrates that a thin PANI/TiO2 nanocomposite sensing film was successfully achieved by LbL self-assembly. The sensor response was found to be greatly influenced by the number of deposited layers. The resulting PANI/TiO2 based gas sensor exhibited good sensitivity and smooth shift in terms of responses based on frequency data compared to responses based on resistance data. It exhibited high sensitivity toward 10 ppm of three different toxic gases (ammonia, hydrogen sulfide and trimethylamine) with an evident frequency shift and a fast response and recovery time. The sensor showed excellent reversibility and long-term stability as well as good selectivity towards NH3. In real-time application, the obtained PANI/TiO2 based gas sensor exhibited excellent performance and accurate evaluation of three typical foodstuffs. The PANI/TiO2 nanocomposite based gas sensor coated on QCM substrate via LbL self-assembly provides a promising efficient sensor to detect toxic gases in relatively low concentrations.

[1]  Fredrik Höök,et al.  Quartz crystal microbalance setup for frequency and Q‐factor measurements in gaseous and liquid environments , 1995 .

[2]  M. Karim,et al.  Sulfonated polyaniline-titanium dioxide nanocomposites synthesized by one-pot UV-curable polymerization method , 2009 .

[3]  A. Heeger,et al.  Semiconducting and Metallic Polymers: The Fourth Generation of Polymeric Materials , 2001, Angewandte Chemie.

[4]  A. Heeger,et al.  Semiconducting polymers: the Third Generation. , 2010, Chemical Society reviews.

[5]  C. Luscombe,et al.  Controlled polymerizations for the synthesis of semiconducting conjugated polymers , 2011 .

[6]  Mira Josowicz,et al.  Composites of intrinsically conducting polymers as sensing nanomaterials. , 2008, Chemical reviews.

[7]  M. Karim,et al.  Preparation of conducting polyaniline/TiO2 composite submicron-rods by the γ-radiolysis oxidative polymerization method , 2008 .

[8]  Yang Li,et al.  Gas sensing properties of layer-by-layer self-assembled ultrathin film of polyaniline/titanium dioxide , 2012 .

[9]  Khalil Arshak,et al.  A review of gas sensors employed in electronic nose applications , 2004 .

[10]  Alphus D. Wilson,et al.  Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry , 2013, Sensors.

[11]  Mohd Omaish Ansari,et al.  Thermal stability, electrical conductivity and ammonia sensing studies on p-toluenesulfonic acid doped polyaniline:titanium dioxide (pTSA/Pani:TiO2) nanocomposites , 2011 .

[12]  F. Mohammad,et al.  Compensation behaviour of electrically conductive polythiophene and polypyrrole , 1998 .

[13]  Peter A Lieberzeit,et al.  Real-life application of a QCM-based e-nose: quantitative characterization of different plant-degradation processes , 2008, Analytical and bioanalytical chemistry.

[14]  R. Schöllhorn,et al.  Demonstration of the Ionic Structure of the Intercalation Compound TaS2 · NH3 , 1977 .

[15]  Shuangxi Xing,et al.  Self-organization of spherical PANI/TiO2 nanocomposites in reverse micelles , 2004 .

[16]  Shigehiro Takahashi,et al.  Layer-by-layer Thin Films and Microcapsules for Biosensors and Controlled Release , 2012, Analytical sciences : the international journal of the Japan Society for Analytical Chemistry.

[17]  Matteo Ferroni,et al.  Nanostructured Metal Oxide Gas Sensors, a Survey of Applications Carried out at SENSOR Lab, Brescia (Italy) in the Security and Food Quality Fields , 2012, Sensors.

[18]  Tai Hyun Park,et al.  Recent advances in electronic and bioelectronic noses and their biomedical applications. , 2011, Enzyme and microbial technology.

[19]  J. Nedeljković,et al.  Self-assembled polyaniline nanotubes and nanoribbons/titanium dioxide nanocomposites , 2010 .

[20]  Noriyuki Kuramoto,et al.  Processable polyaniline–titanium dioxide nanocomposites: effect of titanium dioxide on the conductivity , 2000 .

[21]  Arthur J. Epstein,et al.  X-ray structure of polyaniline , 1991 .

[22]  M. Fahlman,et al.  Comparative XPS surface study of polyaniline thin films , 2008 .

[23]  Sung-Min Park,et al.  Conducting polyaniline‐titanium dioxide nanocomposites prepared by inverted emulsion polymerization , 2009 .

[24]  P. Xu,et al.  The real-time detection of trace-level Hg2+ in water by QCM loaded with thiol-functionalized SBA-15 , 2012 .

[25]  B D Malhotra,et al.  Recent advances in polyaniline based biosensors. , 2011, Biosensors & bioelectronics.

[26]  Zhenjiang Miao,et al.  SnO2/carbon nanotube nanocomposites synthesized in supercritical fluids: highly efficient materials for use as a chemical sensor and as the anode of a lithium-ion battery , 2007 .

[27]  Junsheng Yu,et al.  Fabrication and gas sensitivity of polyaniline–titanium dioxide nanocomposite thin film , 2007 .

[28]  A. Zarbin,et al.  Organic/inorganic hybrid materials formed from TiO2 nanoparticles and polyaniline , 2004 .