Heat transfer enhancement of transverse ribs in circular tubes with consideration of entrance effect

[1]  Masao Goto,et al.  Condensation heat transfer of R410A inside internally grooved horizontal tubes , 2003 .

[2]  M. Goto,et al.  Condensation and evaporation heat transfer of R410A inside internally grooved horizontal tubes , 2001 .

[3]  Shan X. Wang,et al.  Heat transfer enhancement by using metallic filament insert in channel flow , 2001 .

[4]  R. Poulter,et al.  Heat transfer enhancement by means of flag-type insert in tubes , 1987 .

[5]  R. Shah,et al.  Handbook of single-phase convective heat transfer , 1987 .

[6]  S. B. Uttarwar,et al.  Augmentation of Laminar Flow Heat Transfer in Tubes by Means of Wire Coil Inserts , 1985 .

[7]  B. W. Webb,et al.  Conjugate heat transfer in a channel with staggered ribs , 1985 .

[8]  R. Sethumadhavan,et al.  Turbulent flow heat transfer and fluid friction in helical-wire-coil-inserted tubes , 1983 .

[9]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[10]  R. Webb,et al.  Forced convection heat transfer in helically rib-roughened tubes , 1980 .

[11]  E. Sparrow,et al.  Heat Transfer and Pressure Drop Characteristics Induced by a Slat Blockage in a Circular Tube , 1980 .

[12]  A. Bergles,et al.  Augmentation of Horizontal In-Tube Condensation by Means of Twisted-Tape Inserts and Internally Finned Tubes , 1978 .

[13]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[14]  R. J. Goldstein,et al.  Heat transfer and friction in tubes with repeated-rib roughness , 1971 .