Design and optimization of heat exchangers with helical baffles

The hydrodynamics and heat transfer characteristics of a heat exchanger with single-helical baffles are studied experimentally as well as numerically. A heat exchanger with two-layer helical baffles is designed by using computational fluid dynamics (CFD) method. The comparisons of the performance of three heat exchangers with single-segment baffles, single-helical baffles and two-layer helical baffles, respectively, are presented in the paper. The experiment is carried out in counter-current flow pattern with hot oil in shell side and cold water in tube side. Overall heat transfer coefficients are calculated and heat transfer coefficients of shell side are determined by Wilson plots technique. It shows that the heat exchangers with helical baffles have higher heat transfer coefficient to the same pressure drop than that of the heat exchanger with segmental baffles based on the present numerical results, and the configuration of the two-layer helical baffles has better integrated performance than that of the single-helical baffles.

[1]  M. Saffar-Avval,et al.  A general correlation for determining optimum baffle spacing for all types of shell and tube exchangers , 1995 .

[2]  J. Lutcha,et al.  Performance improvement of tubular heat exchangers by helical baffles , 1990 .

[3]  M. J. Andrews,et al.  THREE-DIMENSIONAL NUMERICAL SIMULATION OF SHELL-AND-TUBE HEAT EXCHANGERS. PART II: HEAT TRANSFER , 1998 .

[4]  Fang Xiaoming,et al.  Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes , 2004 .

[5]  Petr Stehlík,et al.  Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental Verification , 1996 .

[6]  Kenneth J. Bell.  Heat Exchanger Design for the Process Industries , 2004 .

[7]  E. Damangir,et al.  Minimizing capital and operating costs of shell and tube condensers using optimum baffle spacing , 2004 .

[8]  R. A. Mashelkar,et al.  Heat Transfer Equipment Design , 1988 .

[9]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[10]  Wang Shuli,et al.  Hydrodynamic Studies on Heat Exchangers with Helical Baffles , 2002 .

[11]  Petr Stehlík,et al.  Different Strategies to Improve Industrial Heat Exchange , 2002 .

[12]  S. Kakaç,et al.  Heat Exchangers: Thermal Hydraulic Fundamentals and Design , 1985 .

[13]  M. J. Andrews,et al.  Three dimensional numerical simulation of shell-and-tube heat exchangers. Part I: Foundation and fluid mechanics , 1998 .

[14]  Y. L. He,et al.  Numerical Simulation and Experimental Study of Flow and Heat Transfer Characteristics of Shell Side Fluid in Shell-and-Tube Heat Exchangers , 2005 .

[15]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[16]  V. Kottke,et al.  Effect of the leakage on pressure drop and local heat transfer in shell-and-tube heat exchangers for staggered tube arrangement , 1998 .

[17]  S. Orszag,et al.  Renormalization group analysis of turbulence. I. Basic theory , 1986 .

[18]  Jonathan Rose,et al.  Heat-transfer coefficients, Wilson plots and accuracy of thermal measurements , 2004 .

[19]  Petr Stehlík,et al.  Comparison of correction factors for shell-and-tube heat exchangers with segmental or helical baffles , 1994 .

[20]  R. Mukherjee,et al.  Use double-segmental baffles in shell-and-tube heat exchangers , 1992 .