Effect of cooling rate on microstructure and mechanical properties of AlCrFe2Ni2 medium entropy alloy fabricated by laser powder bed fusion

[1]  N. Kang,et al.  Laser powder bed fusion of Zr-modified Al–Cu–Mg alloy: Crack-inhibiting, grain refinement, and mechanical properties , 2022, Materials Science and Engineering: A.

[2]  N. Tsuji,et al.  Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy , 2021, Materials Science and Engineering: A.

[3]  H. Fu,et al.  Unique strength-ductility balance of AlCoCrFeNi2.1 eutectic high entropy alloy with ultra-fine duplex microstructure prepared by selective laser melting , 2021, Journal of Materials Science & Technology.

[4]  Xin Lin,et al.  Making selective-laser-melted high-strength Al–Mg–Sc–Zr alloy tough via ultrafine and heterogeneous microstructure , 2021 .

[5]  Le Zhou,et al.  Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition , 2021, Materials Science and Engineering: A.

[6]  Jingchuan Zhu,et al.  Refined microstructure and enhanced mechanical properties of AlCrFe2Ni2 medium entropy alloy produced via laser remelting , 2021 .

[7]  Fan Yang,et al.  Ultra Strong and Ductile Eutectic High Entropy Alloy Fabricated by Selective Laser Melting , 2021, SSRN Electronic Journal.

[8]  C. Liu,et al.  Segregation enabled outstanding combination of mechanical and corrosion properties in a FeCrNi medium entropy alloy manufactured by selective laser melting , 2021 .

[9]  Zheli Feng,et al.  Laser powder bed fusion of high-strength Sc/Zr-modified Al–Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior , 2021 .

[10]  Nicholas C. Ferreri,et al.  Thermo-hydrogen refinement of microstructure to improve mechanical properties of Ti–6Al–4V fabricated via laser powder bed fusion , 2021 .

[11]  Ruifeng Zhang,et al.  Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.1 , 2021 .

[12]  Han Huang,et al.  A Novel Strategy to Additively Manufacture 7075 Aluminium Alloy With Selective Laser Melting , 2021, SSRN Electronic Journal.

[13]  Yan Cui,et al.  Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating , 2020 .

[14]  Bin Liu,et al.  A novel supersaturated medium entropy alloy with superior tensile properties and corrosion resistance , 2020 .

[15]  J. Schroers,et al.  Metastability in high entropy alloys , 2020 .

[16]  J. Tian,et al.  High temperature strengthening via nanoscale precipitation in wrought CoCrNi-based medium-entropy alloys , 2020 .

[17]  N. Park,et al.  High-temperature oxidation behaviour of CoCrNi medium-entropy alloy , 2020, Corrosion Science.

[18]  S. L. Sing,et al.  Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments , 2020 .

[19]  Aiden A. Martin,et al.  Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing , 2020, Science.

[20]  H. Jing,et al.  Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting , 2020 .

[21]  M. Pham,et al.  The role of side-branching in microstructure development in laser powder-bed fusion , 2020, Nature Communications.

[22]  S. S. Nene,et al.  Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing , 2020 .

[23]  L. Gu,et al.  Tuning element distribution, structure and properties by composition in high-entropy alloys , 2019, Nature.

[24]  Le Zhou,et al.  Microstructure and mechanical properties of Zr-modified aluminum alloy 5083 manufactured by laser powder bed fusion , 2019, Additive Manufacturing.

[25]  T. Guraya,et al.  Microstructure formed during selective laser melting of IN738LC in keyhole mode , 2019, Journal of Alloys and Compounds.

[26]  Usman Ali,et al.  Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion , 2019, Materials Science and Engineering: A.

[27]  N. Tsuji,et al.  Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys , 2019, Acta Materialia.

[28]  W. Xiong,et al.  Influence of synthesis method on microstructure and mechanical behavior of Co-free AlCrFeNi medium-entropy alloy , 2019, Intermetallics.

[29]  G. Wang,et al.  High hardness dual-phase high entropy alloy thin films produced by interface alloying , 2019, Scripta Materialia.

[30]  T. Mukherjee,et al.  A digital twin for rapid qualification of 3D printed metallic components , 2019, Applied Materials Today.

[31]  Xianghui Xiao,et al.  Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel , 2019, Materials & Design.

[32]  Yanfei Gao,et al.  Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae , 2019, Nature Communications.

[33]  L. X. Zhang,et al.  A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties , 2019, Journal of Alloys and Compounds.

[34]  Rajiv S. Mishra,et al.  Hierarchical microstructure for improved fatigue properties in a eutectic high entropy alloy , 2018, Scripta Materialia.

[35]  H. Hou,et al.  Computation of stability, elasticity and thermodynamics in equiatomic AlCrFeNi medium-entropy alloys , 2018, Journal of Materials Science.

[36]  Dapeng Xu,et al.  A review on fundamental of high entropy alloys with promising high–temperature properties , 2018, Journal of Alloys and Compounds.

[37]  Xiaozhou Liao,et al.  Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting , 2018, Scripta Materialia.

[38]  L. Murr,et al.  Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing , 2018, Additive Manufacturing.

[39]  T. Yuan,et al.  Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property , 2018 .

[40]  Xiao-feng Sun,et al.  Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.1 , 2018 .

[41]  Chuang Dong,et al.  Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions , 2018 .

[42]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[43]  N. Tsuji,et al.  Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing , 2018, Scientific Reports.

[44]  Li Ma,et al.  Application of Finite Element, Phase-field, and CALPHAD-based Methods to Additive Manufacturing of Ni-based Superalloys. , 2017, Acta materialia.

[45]  N. Tsuji,et al.  Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy , 2017 .

[46]  P. Liaw,et al.  Corrosion-resistant high-entropy alloys: A review , 2017 .

[47]  Wei Zhang,et al.  Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion , 2016 .

[48]  Jian Lu,et al.  High-entropy alloy: challenges and prospects , 2016 .

[49]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[50]  Tongmin Wang,et al.  A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties , 2016 .

[51]  C. Kamath,et al.  Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges , 2015 .

[52]  Martin Heilmaier,et al.  Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys , 2015 .

[53]  L. Vitos,et al.  Empirical design of single phase high-entropy alloys with high hardness , 2015 .

[54]  W. King,et al.  An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel , 2014, Metallurgical and Materials Transactions A.

[55]  K. Dahmen,et al.  Microstructures and properties of high-entropy alloys , 2014 .

[56]  B. S. Murty,et al.  Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys , 2014 .

[57]  B. Stucker,et al.  Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting , 2013, Journal of Materials Engineering and Performance.

[58]  E. Lavernia,et al.  Strengthening Mechanisms in a High-Strength Bulk Nanostructured Cu-Zn-Al Alloy Processed Via Cryomilling and Spark Plasma Sintering , 2013 .

[59]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[60]  N. Stepanov,et al.  Cross-kink unpinning controls the medium- to high-temperature strength of body-centered cubic NbTiZr medium-entropy alloy , 2022, Scripta Materialia.

[61]  Mengna Liu,et al.  Multi-laser powder bed fusion of Ti–6Al–4V alloy: Defect, microstructure, and mechanical property of overlap region , 2021 .

[62]  J. Moverare,et al.  Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel , 2021 .

[63]  Ting Zhu,et al.  Additively manufactured hierarchical stainless steels with high strength and ductility. , 2018, Nature materials.

[64]  Jien-Wei Yeh,et al.  High-Entropy Alloys: Basic Concepts , 2014 .