Effect of elliptic handle shape on grasping strategies, grip force distribution, and twisting ability

A generic torque model for various handle shapes has been developed and evaluated using experimental data. Twelve subjects performed maximum isometric torques using circular and elliptic cylinders in medium and large sizes (circular: r = 25.4, 38.1 mm; elliptic: semi-major/minor axes = 30.9/19.3, 47.1/27.8 mm) finished with aluminium and rubber, in two opposite directions. Torque, grip force distribution, and finger position were recorded. Maximum torques were 25%, 7%, and 31% greater for the elliptic, large-size, and rubber-finished cylinders than for the circular, medium-size, and aluminium-finished cylinders, respectively. Greater torque for the elliptic cylinders was associated with 58% greater normal force that the subjects could generate for the elliptic than circular cylinders. The model suggests that greater torques for the large-size and rubber cylinders are related to long moment arms and greater frictional coupling at the hand–cylinder interface, respectively. Subjects positioned their hands differently depending on torque direction to maximise their normal force and torque generation. Statement of Relevance: Desirable handle features for torque generation may be different from those for grip only. Design of handles per advantageous handle features (e.g., shape, size, and surface) may help increase people's torque strength and contribute to increased physical capacity of people.

[1]  Richard Wells,et al.  Measurement of prehensile grasp capabilities by a force and moment wrench: Methodological development and assessment of manual workers , 2004, Ergonomics.

[2]  M. M. Ayoub,et al.  The determination of an optimum size cylindrical handle by use of electromyography. , 1971, Ergonomics.

[3]  Thomas J. Armstrong,et al.  The Effect of Handle Friction and Inward or Outward Torque on Maximum Axial Push Force , 2008, Hum. Factors.

[4]  E Berton,et al.  Effect of object width on precision grip force and finger posture , 2008, Ergonomics.

[5]  Joanne O. Crawford,et al.  The interaction between lid diameter, height and shape on wrist torque exertion in younger and older adults , 2002, Ergonomics.

[6]  Thomas J. Armstrong,et al.  Hand-Handhold Coupling: Effect of Handle Shape, Orientation, and Friction on Breakaway Strength , 2009, Hum. Factors.

[7]  Christine M Haslegrave,et al.  Ready steady push – a study of the role of arm posture in manual exertions , 2008, Ergonomics.

[8]  Thomas J Armstrong,et al.  Biomechanical analysis for handle stability during maximum push and pull exertions , 2009, Ergonomics.

[9]  Katharyn A. Grant,et al.  An analysis of handle designs for reducing manual effort: The influence of grip diameter , 1992 .

[10]  C G Drury.  Handles for manual materials handling. , 1980, Applied ergonomics.

[11]  Thomas J. Armstrong,et al.  Inward Torque and High-Friction Handles Can Reduce Required Muscle Efforts for Torque Generation , 2008, Hum. Factors.

[12]  W E Gilmore,et al.  Thumbs up: anthropometry of the first digit. , 1988, Human factors.

[13]  D. Chaffin,et al.  The effect of torque direction and cylindrical handle diameter on the coupling between the hand and a cylindrical handle. , 2007, Journal of biomechanics.

[14]  Stephan Konz,et al.  Jar Lids: Effect of Diameter, Gripping Materials and Knurling , 1986 .

[15]  D. Christian Grieshaber,et al.  The Effects of Insertion Method and Force on Hand Clearance Envelopes for Rubber Hose Insertion Tasks , 2009, Hum. Factors.

[16]  T Ohtsuki,et al.  Decrease in grip strength induced by simultaneous bilateral exertion with reference to finger strength. , 1981, Ergonomics.

[17]  Thomas J Armstrong,et al.  Effects of handle orientation, gloves, handle friction and elbow posture on maximum horizontal pull and push forces , 2010, Ergonomics.

[18]  S K Adams,et al.  Maximum Voluntary Hand Grip Torque for Circular Electrical Connectors , 1988, Human factors.

[19]  Sang Wook Lee,et al.  Estimation of the effective static moment arms of the tendons in the index finger extensor mechanism. , 2008, Journal of biomechanics.

[20]  Na Jin Seo.  Dependence of safety margins in grip force on isometric push force levels in lateral pinch , 2009, Ergonomics.

[21]  Yong-Ku Kong,et al.  Handle grip span for optimising finger-specific force capability as a function of hand size , 2009, Ergonomics.

[22]  Thomas J. Armstrong,et al.  A comparison of two methods of measuring static coefficient of friction at low normal forces: a pilot study , 2009, Ergonomics.

[23]  Andris Freivalds,et al.  Evaluation of handles in a maximum gripping task , 2004, Ergonomics.

[24]  E. G. Cruz,et al.  Impact of finger posture on mapping from muscle activation to joint torque. , 2006, Clinical biomechanics.

[25]  T D Cahalan,et al.  The relationship between wrist position, grasp size, and grip strength. , 1992, The Journal of hand surgery.

[26]  D. Chaffin,et al.  A proposed standard procedure for static muscle strength testing. , 1974, American Industrial Hygiene Association journal.

[27]  Beverley Norris,et al.  Filling 'gaps' in strength data for design. , 2003, Applied ergonomics.

[28]  Thomas J. Armstrong,et al.  Investigation of Grip Force, Normal Force, Contact Area, Hand Size, and Handle Size for Cylindrical Handles , 2008, Hum. Factors.

[29]  A A Amis,et al.  Variation of finger forces in maximal isometric grasp tests on a range of cylinder diameters. , 1987, Journal of biomedical engineering.

[30]  D O'Neill,et al.  Performance in gripping and turning -a study in hand/handle effectiveness. , 1975, Applied ergonomics.

[31]  Fong-Chin Su,et al.  Kinetic analysis of the thumb in jar-opening activity among female adults , 2008, Ergonomics.

[32]  B D Lowe,et al.  Evaluation of handle design characteristics in a maximum screwdriving torque task , 2007, Ergonomics.

[33]  Leah R. Enders,et al.  Phalanx force magnitude and trajectory deviation increased during power grip with an increased coefficient of friction at the hand-object interface. , 2011, Journal of biomechanics.

[34]  S N Imrhan,et al.  Modelling wrist-twisting strength of the elderly. , 1988, Ergonomics.

[35]  Robert G. Radwin,et al.  Grip Force Vectors for Varying Handle Diameters and Hand Sizes , 2004, Hum. Factors.

[36]  T. Ohtsuki.  Inhibition of individual fingers during grip strength exertion. , 1981, Ergonomics.

[37]  H. Hsu,et al.  Jar-opening challenges. Part 2: Estimating the force-generating capacity of thumb muscles in healthy young adults during jar-opening tasks , 2009, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[38]  Avril Thomson,et al.  A novel device for evaluating forces during the dynamic jar opening action--do older and younger adults do things differently? , 2011, Medical engineering & physics.

[39]  J Rowson,et al.  Hold, grasp, clutch or grab: consumer grip choices during food container opening. , 2011, Applied ergonomics.

[40]  C. Hall,et al.  External pressure at the hand during object handling and work with tools , 1997 .