The combustion of simulated waste particles in a fixed bed

Abstract Stable combustion of waste in an incinerator is necessary for optimal operation. However, complicated reactions, as well as heat and mass transfer, make understanding the process difficult. An experimental bed reactor is utilized to investigate the combustion of simulated waste particles, and a computational model is introduced to predict the phenomena. When the bed is brought into a radiating environment, an apparent flame zone is formed at the bed’s top surface after a certain time delay. Subsequently, the flame front moves downwards into the bed of fuel. The flame propagation speed, i.e., the rate of progress of the apparent flame zone, is dependent on the air supply rate, the calorific value of the solid fuel, and the particle size. Based on the availability of oxygen, two distinct reaction modes are identified: the oxygen-limited mode and the reaction-limited mode. An increase in the flow rate of air eventually leads to flame extinction, as a result of excessive cooling by convection. The numerical results show good agreement with the experimental observations. The transient behavior of the local temperature and the rate of oxygen consumption are adequately reproduced. The effect of the combustion parameters on combustion in the bed is also discussed further.

[1]  L. Douglas Smoot,et al.  Coal Combustion and Gasification , 1985 .

[2]  Herri Susanto,et al.  A moving-bed gasifier with internal recycle of pyrolysis gas , 1996 .

[3]  Sangmin Choi,et al.  Comparative evaluation of municipal solid waste incinerator designs by flow simulation , 1994 .

[4]  G. Froment,et al.  Chemical Reactor Analysis and Design , 1979 .

[5]  Peter R. Solomon,et al.  Coal pyrolysis: Experiments, kinetic rates and mechanisms , 1992 .

[6]  Kalyan Annamalai,et al.  Interactive processes in gasification and combustion—II. Isolated carbon, coal and porous char particles , 1993 .

[7]  H. Johnstone,et al.  Heat and mass transfer in packed beds , 1955 .

[8]  R. W. Hornbeck.  Numerical Methods , 1975 .

[9]  M. Modest.  Radiative heat transfer , 1993 .

[10]  L. Douglas Smoot,et al.  An improved model for fixed-bed coal combustion and gasification: sensitivity analysis and applications , 1996 .

[11]  Raymond Edelman,et al.  Research on Methods of Improving the Combustion Characteristics of Liquid Hydrocarbon Fuels. Volume I. Experimental Determination of Ignition Delay Times in Subsonic Flow Systems. Volume 2. Kinetics Modeling and Supersonic Testing , 1972 .

[12]  Colomba Di Blasi,et al.  Modeling and simulation of combustion processes of charring and non-charring solid fuels , 1993 .

[13]  L. D. Smoot,et al.  Combustion and gasification of coals in fixed-beds , 1993 .

[14]  D. Kunii,et al.  Heat transfer characteristics of porous rocks , 1960 .

[15]  G. Adomeit,et al.  Ignition and combustion of a packed bed in a stagnation point flow part II : Heterogeneous and homogeneous reactions , 1998 .

[16]  A. F. Sarofim,et al.  Fossil fuel combustion , 1990 .

[17]  J. K. Floes.  A review of: William Bartok and Adel F. Sarofim, eds., “Fossil Fuel Combustion”. (New York: Wiley, 1991). d99.95. , 1992 .

[18]  Lawrence J. Shadle,et al.  Predictive tool to aid design and operations of pressurized fixed bed coal gasifiers , 1998 .

[19]  N. Wakao,et al.  Heat and mass transfer in packed beds. Volume 1 , 1983 .