HIGHLY LOADED LOW-PRESSURE TURBINE: DESIGN, NUMERICAL AND EXPERIMENTAL ANALYSIS (Preprint)

Abstract : The performance and detailed flow physics of a highly loaded, transonic, low-pressure turbine stage has been investigated numerically and experimentally. The mean rotor Zweifel coefficient was 1.35, with a work coefficient of 2.8, and a total pressure ratio of 1.75. The aerodynamic design was based on recent developments in boundary layer transition modeling. Steady and unsteady numerical solutions were used to design the blade geometry as well as to predict the design and off-design performance. Measurements were acquired in a recently developed, high-speed, rotating turbine facility. The nozzle-vane only and full stage characteristics were measured with varied mass flow, Reynolds number, and free-stream turbulence. The efficiency calculated from torque at the design speed and pressure ratio of the turbine was found to be 90.6%. This compared favorably to the meanline target value of 90.5%. This paper will describe the measurements and numerical solutions in detail for both design and off-design conditions.

[1]  Thomas J. Santner,et al.  The Design and Analysis of Computer Experiments , 2003, Springer Series in Statistics.

[2]  John P. Clark,et al.  Predicting Transition in Turbomachinery—Part II: Model Validation and Benchmarking , 2007 .

[3]  H. Hoheisel,et al.  Influence of Free Stream Turbulence and Blade Pressure Gradient on Boundary Layer and Loss Behaviour of Turbine Cascades , 1986 .

[4]  Howard P. Hodson,et al.  Separation and Transition Control on an Aft-Loaded Ultra-High-Lift LP Turbine Blade at Low Reynolds Numbers: Low-Speed Investigation , 2006 .

[5]  Heinz-Peter Schiffer,et al.  The Application of Ultra High Lift Blading in the BR715 LP Turbine , 2001 .

[6]  L. Dailey,et al.  Effect of Loading Level and Distribution on LPT Losses , 2008 .

[7]  L. Langston,et al.  Three-Dimensional Flow Within a Turbine Cascade Passage , 1977 .

[8]  John P. Clark,et al.  Predicting Transition in Turbomachinery—Part I: A Review and New Model Development , 2007 .

[9]  Scott C. Morris,et al.  Design of a Transonic Research Turbine Facility , 2006 .

[10]  U. Okapuu,et al.  A Mean Line Prediction Method for Axial Flow Turbine Efficiency , 1982 .

[11]  Jeffrey P. Bons,et al.  Separated Flow Transition on an LP Turbine Blade With Pulsed Flow Control , 2008 .

[12]  Jochen Gier,et al.  Designing LP Turbines for Optimized Airfoil Lift , 2008 .

[13]  Jochen Gier,et al.  On the Impact of Blade Count Reduction on Aerodynamic Performance and Loss Generation in a Three-Stage LP Turbine , 2001 .

[14]  Peter S. Bernard,et al.  Turbulent Flow: Analysis, Measurement and Prediction , 2002 .

[15]  D. J. Dorney,et al.  Navier–Stokes Analysis of Turbine Blade Heat Transfer and Performance , 1992 .

[16]  Stephan Staudacher,et al.  On the Assessment of Turbine Efficiency From Experimental Data for Low Pressure Turbines at Low Reynolds Numbers , 2012 .

[17]  Garret N. Vanderplaats,et al.  Numerical Optimization Techniques for Engineering Design: With Applications , 1984 .

[18]  Howard P. Hodson,et al.  Development of Blade Profiles for Low-Pressure Turbine Applications , 1997 .

[19]  Jeffrey P. Bons,et al.  Designing Low-Pressure Turbine Blades With Integrated Flow Control , 2005 .

[20]  H. Hoheisel,et al.  Influence of Free Stream Turbulence and Blade Pressure Gradient on Boundary Layer and Loss Behaviour of Turbine Cascades , 1986 .

[21]  John P. Clark,et al.  The Application of Flow Control to an Aft-Loaded Low Pressure Turbine Cascade With Unsteady Wakes , 2012 .

[22]  D. C. Evans,et al.  Highly loaded multi-stage fan drive turbine-tandem blade configuration design , 1972 .

[23]  D. G. Cherry,et al.  The aerodynamic design and performance of the NASA/GE E3 low pressure turbine , 1984 .

[24]  Howard P. Hodson,et al.  An Investigation of Boundary Layer Development in a Multistage LP Turbine , 1994 .

[25]  Leonhard Fottner,et al.  A Test Case for the Numerical Investigation of Wake Passing Effects on a Highly Loaded LP Turbine Cascade Blade , 2001 .

[26]  Hermann F. Fasel,et al.  Investigation of Low-Pressure Turbine Separation Control , 2007 .

[27]  Mark McQuilling,et al.  DESIGN AND VALIDATION OF A HIGH-LIFT LOW-PRESSURE TURBINE BLADE , 2007 .

[28]  Allen Medlock,et al.  An Integrated Design System for Fans, Compressors, and Turbines: Part 3 — Fan and Compressor Airfoil Geometry Generators , 2004 .

[29]  M. V. Casey.  Computational methods for preliminary design and geometry definition in turbomachinery , 1994 .

[30]  P. Lax,et al.  Difference schemes for hyperbolic equations with high order of accuracy , 1964 .