Shunt Damping Vibration Control Technology: A Review

Smart materials and structures have attracted a significant amount of attention for their vibration control potential in engineering applications. Compared to the traditional active technique, shunt damping utilizes an external circuit across the terminals of smart structure based transducers to realize vibration control. Transducers can simultaneously serve as an actuator and a sensor. Such unique advantage offers a great potential for designing sensorless devices to be used in structural vibration control and reduction engineering. The present literature combines piezoelectric shunt damping (PSD) and electromagnetic shunt damping (EMSD), establishes a unified governing equation of PSD and EMSD, and reports the unique vibration control performance of these shunts. The schematic of shunt circuits is given and demonstrated, and some common control principles and equations of these shunts are summarized. Finally, challenges and perspective of the shunt damping technology are discussed, and suggestions made based on the knowledge and experience of the authors.

[1]  Xinong Zhang,et al.  A novel multimode negative inductance negative resistance shunted electromagnetic damping and its application on a cantilever plate , 2012 .

[2]  Ning Li.  Virtual Piezoelectric Vibration Absorber with LR Parallel Shunt Circuit , 2012 .

[3]  G Richardson,et al.  A 2-collinear-DoF strut with embedded negative-resistance electromagnetic shunt dampers for spacecraft micro-vibration , 2017 .

[4]  Takamasa Hori,et al.  Suppression control method for torque vibration of three-phase HB-type stepping motor utilizing feedforward control , 2002, IEEE Trans. Ind. Electron..

[5]  J A B Gripp,et al.  An adaptive piezoelectric vibration absorber enhanced by a negative capacitance applied to a shell structure , 2015 .

[6]  Junghsen Lieh.  Semiactive and Active Suspensions for Vehicle Ride Control Using Velocity Feedback , 1997 .

[7]  J. A. Castellanos,et al.  Flatness-Based Active Vibration Control for Piezoelectric Actuators , 2013, IEEE/ASME Transactions on Mechatronics.

[8]  Xiaojun Qiu,et al.  Sound absorption of a finite micro-perforated panel backed by a shunted loudspeaker. , 2014, The Journal of the Acoustical Society of America.

[9]  Jose-Luis Perez-Diaz,et al.  Z-Damper: A New Paradigm for Attenuation of Vibrations , 2016 .

[10]  Moon K. Kwak,et al.  FUZZY-LOGIC BASED VIBRATION SUPPRESSION CONTROL EXPERIMENTS ON ACTIVE STRUCTURES , 1996 .

[11]  Brian R. Mace,et al.  A Robust Adaptive Tuned Vibration Absorber Using Semi-Passive Shunt Electronics , 2016, IEEE Transactions on Industrial Electronics.

[12]  Andrew J. Fleming,et al.  A broadband controller for shunt piezoelectric damping of structural vibration , 2003 .

[13]  Mir Behrad Khamesee,et al.  Permanent magnet configuration in design of an eddy current damper , 2009 .

[14]  Renaud Bastaits,et al.  Synchronized switch damping on inductor and negative capacitance , 2011 .

[15]  Brian R. Mace,et al.  A self-tuning electromagnetic vibration absorber with adaptive shunt electronics , 2013 .

[16]  S. O. Reza Moheimani,et al.  Control orientated synthesis of high-performance piezoelectric shunt impedances for structural vibration control , 2005, IEEE Transactions on Control Systems Technology.

[17]  Xing Shen,et al.  Vibration control laws via shunted piezoelectric transducers: A review , 2014 .

[18]  Seung-Bok Choi,et al.  Vibration control of an HDD disk-spindle system using piezoelectric bimorph shunt damping: II. Optimal design and shunt damping implementation , 2007 .

[19]  Lixi Huang,et al.  Thin broadband noise absorption through acoustic reactance control by electro-mechanical coupling without sensor. , 2014, The Journal of the Acoustical Society of America.

[20]  Keshav P. Dahal,et al.  Intelligent Learning Algorithms for Active Vibration Control , 2007, IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews).

[21]  Jaehwan Kim,et al.  New shunting parameter tuning method for piezoelectric damping based on measured electrical impedance , 2000 .

[22]  Pavel Mokrý,et al.  Sound reflection in an acoustic impedance tube terminated with a loudspeaker shunted by a negative impedance converter , 2012 .

[23]  Gaëtan Kerschen,et al.  Piezoelectric vibration damping using resonant shunt circuits: an exact solution , 2014 .

[24]  Steen Krenk,et al.  Equal modal damping design for a family of resonant vibration control formats , 2013 .

[25]  Heath Hofmann,et al.  Damping as a result of piezoelectric energy harvesting , 2004 .

[26]  Il-Kwon Oh,et al.  A current-flowing electromagnetic shunt damper for multi-mode vibration control of cantilever beams , 2009 .

[27]  Pavel Mokrý,et al.  Sound absorbing system as an application of the active elasticity control technique , 2003 .

[28]  Ryan L. Harne,et al.  Development and testing of a dynamic absorber with corrugated piezoelectric spring for vibration control and energy harvesting applications , 2013 .

[29]  S. J. Pietrzko,et al.  FE Analysis of a PZT-actuated adaptive beam with vibration damping using a parallel R-L shunt circuit , 2006 .

[30]  W. Cao,et al.  Smart materials and structures. , 1992, Proceedings of the National Academy of Sciences of the United States of America.

[31]  Young-Chae Jung,et al.  Broadband noise reduction of piezoelectric smart panel featuring negative-capacitive-converter shunt circuit , 2006 .

[32]  Jae-Eung Oh,et al.  Structure borne noise control of a clamped panel using shunt damping system , 2015 .

[33]  Keisuke Yamada,et al.  Optimum tuning of series and parallel LR circuits for passive vibration suppression using piezoelectric elements , 2010 .

[34]  Chul H. Park,et al.  Multiple-mode structural vibration control using negative capacitive shunt damping , 2003 .

[35]  Steen Krenk,et al.  Balanced calibration of resonant shunt circuits for piezoelectric vibration control , 2012 .

[36]  Milos Kodejska,et al.  Wall-plug efficiency analysis of semi-active piezoelectric shunt damping systems , 2016 .

[37]  Bo Yan,et al.  Design and test of a novel isolator with negative resistance electromagnetic shunt damping , 2012 .

[38]  In Lee,et al.  Optimal placement of piezoelectric sensors and actuators for vibration control of a composite plate using genetic algorithms , 1999 .

[39]  Andrew J. Fleming,et al.  Multiple mode current flowing passive piezoelectric shunt controller , 2003 .

[40]  S.O.R. Moheimani,et al.  Vibration reduction of resonant structures using charge controlled piezoelectric actuators , 2003 .

[41]  Shu-yau Wu,et al.  Method for multiple-mode shunt damping of structural vibration using a single PZT transducer , 1998, Smart Structures.

[42]  Stefano Manzoni,et al.  Vibration attenuation by means of piezoelectric transducer shunted to synthetic negative capacitance , 2012 .

[43]  Nobuyuki Matsui,et al.  Optimal design of robust vibration suppression controller using genetic algorithms , 2004, IEEE Transactions on Industrial Electronics.

[44]  Daniel G. Cole,et al.  A Comprehensive Study of the RL Series Resonant Shunted Piezoelectric: A Feedback Controls Perspective , 2011 .

[45]  Jae-Sung Bae,et al.  Vibration suppression of a cantilever beam using eddy current damper , 2005 .

[46]  Manfred Morari,et al.  Adaptive multi-mode resonant piezoelectric shunt damping , 2004 .

[47]  Jian-Bin Zhou,et al.  Evaluation of Eddy-Current Effects on Diamagnetic Bearings for Microsystems , 2009, IEEE Transactions on Industrial Electronics.

[48]  Kohei Yamamoto,et al.  A study of sound shielding control of curved piezoelectric sheets connected to negative capacitance circuits , 2008 .

[49]  Jörg Wallaschek,et al.  Improved piezoelectric switch shunt damping technique using negative capacitance , 2013 .

[50]  Karl Popp,et al.  Optimization of damping and absorbing performance of shunted piezo elements utilizing negative capacitance , 2006 .

[51]  Giovanni Iamin Kotinda,et al.  Tuning dynamic vibration absorbers by using ant colony optimization , 2008 .

[52]  Shu-yau Wu.  Broadband piezoelectric shunts for passive structural vibration control , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[53]  Yu Zhou,et al.  Design and characterization of an electromagnetic energy harvester for vehicle suspensions , 2010 .

[54]  Pavel Mokrý,et al.  Feedback Control of Piezoelectric Actuator Elastic Properties in a Vibration Isolation System , 2007 .

[55]  N. Sadegh,et al.  State-Switched Absorber for Semi-Active Structural Control , 2000 .

[56]  Liu Jian,et al.  Applications of shape memory alloys , 2001 .

[57]  Hongping Zhu,et al.  Electromagnetic energy harvesting from structural vibrations during earthquakes , 2016 .

[58]  Manfred Morari,et al.  Adaptive resonant shunted piezoelectric devices for vibration suppression , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[59]  Christopher R. Kelley,et al.  Adaptive synchronized switch damping on an inductor: a self-tuning switching law , 2017 .

[60]  심성한,et al.  Fundamentals of Vibrations , 2013 .

[61]  Gangbing Song,et al.  Vibration control of civil structures using piezoceramic smart materials: A review , 2006 .

[62]  A. R. Damanpack,et al.  On the vibration control capability of shape memory alloy composite beams , 2014 .

[63]  S.O.R. Moheimani,et al.  Adaptive electromagnetic shunt damping , 2006, IEEE/ASME Transactions on Mechatronics.

[64]  Rajesh Rajamani,et al.  Methods for multimodal vibration suppression and energy harvesting using piezoelectric actuators , 2009 .

[65]  Samir A. Nayfeh,et al.  Design and Analysis of a New Type of Electromagnetic Damper With Increased Energy Density , 2011 .

[66]  Joseph J. Hollkamp,et al.  A Self-Tuning Piezoelectric Vibration Absorber , 1994 .

[67]  D. Inman,et al.  Concept and model of eddy current damper for vibration suppression of a beam , 2005 .

[68]  Pavel Mokrý,et al.  Measurement of mechanical and electrical energy flows in the semiactive piezoelectric shunt damping system , 2012 .

[69]  Sb Kandagal,et al.  Structural vibration control using resistively shunted piezoceramics , 2002 .

[70]  Justin J. Scheidler,et al.  Dynamically tuned magnetostrictive spring with electrically controlled stiffness , 2016 .

[71]  Oliver Heuss,et al.  Optimally tuned resonant negative capacitance for piezoelectric shunt damping based on measured electromechanical impedance , 2015, Smart Structures.

[72]  Andrew J. Fleming,et al.  Synthetic impedance for implementation of piezoelectric shunt-damping circuits , 2000 .

[73]  Jw Helm Jansen,et al.  Optimisation and measurement of eddy current damping in a passive tuned mass damper , 2016 .

[74]  Daniel J. Inman,et al.  Application of a Negative Capacitance Circuit in Synchronized Switch Damping Techniques for Vibration Suppression , 2011 .

[75]  Munehiro Date,et al.  Electrically controlled elasticity utilizing piezoelectric coupling , 2000 .

[76]  S. Krenk,et al.  Calibration of piezoelectric RL shunts with explicit residual mode correction , 2017 .

[77]  J. L. Merrill.  Theory of the negative impedance converter , 1951 .

[78]  Nitesh P. Yelve,et al.  Active vibration control of cantilever beam by using PID based output feedback controller , 2012 .

[79]  K.K. Tan,et al.  Optimization of Mechatronic Design Quotient Using Genetic Algorithm in Vibration Controllers for Flexible Beams , 2009 .

[80]  A. Ng,et al.  Actuator Placement Optimization and Adaptive Vibration Control of Plate Smart Structures , 2005 .

[81]  H. Kulah,et al.  Fully Self-Powered Electromagnetic Energy Harvesting System With Highly Efficient Dual Rail Output , 2012, IEEE Sensors Journal.

[82]  Bo Yan,et al.  An Enhanced Piezoelectric Vibration Energy Harvesting System with Macro Fiber Composite , 2015 .

[83]  P. Mokry,et al.  Finite element analysis of the macro fiber composite actuator: macroscopic elastic and piezoelectric properties and active control thereof by means of negative capacitance shunt circuit , 2015 .

[84]  Munehiro Date,et al.  Vibration Control by Magnetostrictive Actuator Coupled with Negative Inductance Circuits , 2003 .

[85]  Bo Yan,et al.  Investigation of negative resistance shunt damping for the vibration control of a plate , 2014 .

[86]  Pavel Mokrý,et al.  Noise shielding system utilizing a thin piezoelectric membrane and elasticity control , 2003 .

[87]  Lei Zuo,et al.  Dual-Functional Energy-Harvesting and Vibration Control: Electromagnetic Resonant Shunt Series Tuned Mass Dampers. , 2012, Journal of vibration and acoustics.

[88]  S.O.R. Moheimani,et al.  Passive vibration control via electromagnetic shunt damping , 2005, IEEE/ASME Transactions on Mechatronics.

[89]  S. O. Reza Moheimani,et al.  Current flowing multiple-mode piezoelectric shunt dampener , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[90]  Xinong Zhang,et al.  Vibration isolation of a beam via negative resistance electromagnetic shunt dampers , 2012 .

[91]  J Nečásek,et al.  Digital synthetic impedance for application in vibration damping. , 2016, The Review of scientific instruments.

[92]  Robert L. Forward,et al.  Electronic damping of vibrations in optical structures. , 1979, Applied optics.

[93]  Mehdi Ahmadian,et al.  ON THE APPLICATION OF SHUNTED PIEZOCERAMICS FOR INCREASING ACOUSTIC TRANSMISSION LOSS IN STRUCTURES , 2001 .

[94]  S. Snyder,et al.  On feedforward active control of sound and vibration using vibration error signals , 1993 .

[95]  S. O. Reza Moheimani,et al.  A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers , 2003, IEEE Trans. Control. Syst. Technol..

[96]  P. Mokry,et al.  Sound shielding by a piezoelectric membrane and a negative capacitor with feedback control , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[97]  Mehrdad N. Ghasemi-Nejhad,et al.  Adaptive Control of Flexible Active Composite Manipulators Driven by Piezoelectric Patches and Active Struts With Dead Zones , 2008, IEEE Transactions on Control Systems Technology.

[98]  Bo Yan,et al.  Negative impedance shunted electromagnetic absorber for broadband absorbing: experimental investigation , 2014 .

[99]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless remote power supply , 2002 .

[100]  Steen Krenk,et al.  Optimal resonant control of flexible structures , 2009 .

[101]  Manfred Morari,et al.  Control of Resonant Acoustic Sound Fields by Electrical Shunting of a Loudspeaker , 2007, IEEE Transactions on Control Systems Technology.

[102]  Jun Jiang,et al.  Independent modal resonant shunt for multimode vibration control of a truss-cored sandwich panel , 2014 .

[103]  Seung-Bok Choi,et al.  Vibration control of an HDD disk-spindle system utilizing piezoelectric bimorph shunt damping: I. Dynamic analysis and modeling of the shunted drive , 2007 .

[104]  George A. Lesieutre,et al.  Tunable electrically shunted piezoceramic vibration absorber , 1997, Smart Structures.

[105]  Xing Shen,et al.  Power output and efficiency of a negative capacitance and inductance shunt for structural vibration control under broadband excitation , 2015 .

[106]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[107]  Tsuyoshi Inoue,et al.  Vibration Suppression Using Electromagnetic Resonant Shunt Damper , 2008 .

[108]  Manuel Collet,et al.  The power output and efficiency of a negative capacitance shunt for vibration control of a flexural system , 2013 .

[109]  S. O. Reza Moheimani,et al.  Resonant control of structural vibration using charge-driven piezoelectric actuators , 2005, IEEE Transactions on Control Systems Technology.

[110]  K. Kimura,et al.  Sound isolation by piezoelectric polymer films connected to negative capacitance circuits , 2002, IEEE Transactions on Dielectrics and Electrical Insulation.

[111]  A. Preumont,et al.  Active vibration control , 2001 .

[112]  Reinder Banning,et al.  Modeling piezoelectric actuators , 2000 .

[113]  V. Linhart,et al.  Adaptive vibration suppression system: an iterative control law for a piezoelectric actuator shunted by a negative capacitor , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[114]  Andrew J. Fleming,et al.  Institute of Physics Publishing Smart Materials and Structures Reducing the Inductance Requirements of Piezoelectric Shunt Damping Systems , 2003 .

[115]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[116]  A. Preumont,et al.  Vibration damping with negative capacitance shunts: theory and experiment , 2008 .

[117]  G. Caruso.  A critical analysis of electric shunt circuits employed in piezoelectric passive vibration damping , 2001 .

[118]  C. H. Park,et al.  Dynamics modelling of beams with shunted piezoelectric elements , 2003 .

[119]  Andrew J. Fleming,et al.  Improved Current and Charge Amplifiers for Driving Piezoelectric Loads, and Issues in Signal Processing Design for Synthesis of Shunt Damping Circuits , 2004 .

[120]  S. O. Reza Moheimani,et al.  Adaptive piezoelectric shunt damping , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[121]  Steen Krenk,et al.  A Family of Resonant Vibration Control Formats , 2012 .

[122]  Andrew J. Fleming,et al.  Synthesis and implementation of sensor-less shunt controllers for piezoelectric and electromagnetic vibration control , 2004 .

[123]  W. Clark.  Vibration Control with State-Switched Piezoelectric Materials , 2000 .

[124]  Justin J. Scheidler,et al.  Dynamically tuned magnetostrictive spring with electrically controlled stiffness , 2015, Smart Structures.

[125]  M. Farid Golnaraghi,et al.  Design and modeling of a magnetic shock absorber based on eddy current damping effect , 2008 .

[126]  William W. Clark,et al.  A Novel Semi-Active Multi-Modal Vibration Control Law for a Piezoceramic Actuator , 2003 .

[127]  Ephrahim Garcia,et al.  A Self-Sensing Piezoelectric Actuator for Collocated Control , 1992 .

[128]  Zhaoshuo Jiang,et al.  A fully dynamic magneto-rheological fluid damper model , 2012 .

[129]  Bo Yan,et al.  Structural multimode vibration absorbing with electromagnetic shunt damping , 2016 .

[130]  Xinong Zhang,et al.  A new electromagnetic shunt damping treatment and vibration control of beam structures , 2009 .

[131]  Jaehwan Kim,et al.  Broadband transmission noise reduction of smart panels featuring piezoelectric shunt circuits and sound-absorbing material. , 2000, The Journal of the Acoustical Society of America.

[132]  Hervé Lissek,et al.  Electroacoustic absorbers: bridging the gap between shunt loudspeakers and active sound absorption. , 2011, The Journal of the Acoustical Society of America.

[133]  Nesbitt W. Hagood,et al.  Damping of structural vibrations with piezoelectric materials and passive electrical networks , 1991 .

[134]  You-Lin Xu,et al.  Linear electromagnetic devices for vibration damping and energy harvesting: Modeling and testing , 2012 .

[135]  Shu-yau Wu,et al.  Piezoelectric shunts with a parallel R-L circuit for structural damping and vibration control , 1996, Smart Structures.

[136]  C.M.A. Vasques,et al.  Improved passive shunt vibration control of smart piezo-elastic beams using modal piezoelectric transducers with shaped electrodes , 2012 .

[137]  Daniel J. Inman,et al.  On the optimal energy harvesting from a vibration source using a piezoelectric stack , 2009 .

[138]  J. Hollkamp.  Multimodal Passive Vibration Suppression with Piezoelectric Materials and Resonant Shunts , 1994 .

[139]  M. Balas.  Direct Velocity Feedback Control of Large Space Structures , 1979 .

[140]  S.O. Reza Moheimani,et al.  Active LQR and H/sub 2/ shunt control of electromagnetic transducers , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[141]  Gangbing Song,et al.  Applications of shape memory alloys in civil structures , 2006 .

[142]  Xinong Zhang,et al.  Self-powered electromagnetic energy harvesting for the low power consumption electronics: Design and experiment , 2017 .

[143]  Ioan Doré Landau,et al.  Design and Tuning of Reduced Order H-Infinity Feedforward Compensators for Active Vibration Control , 2012, IEEE Transactions on Control Systems Technology.

[144]  Jae-Sung Bae,et al.  Improved Concept and Model of Eddy Current Damper , 2006 .

[145]  Mir Behrad Khamesee,et al.  Eddy current damper feasibility in automobile suspension: modeling, simulation and testing , 2008 .

[146]  Hans Irschik,et al.  Passive damping and exact annihilation of vibrations of beams using shaped piezoelectric layers and tuned inductive networks , 2009 .

[147]  Bin Li,et al.  Vibration suppression of a hard disk driver actuator arm using piezoelectric shunt damping with a topology-optimized PZT transducer , 2009 .

[148]  Shu-yau Wu.  Method for Multiple Mode Piezoelectric Shunting with Single PZT Transducer for Vibration Control , 1998 .