Analysis of elastic–plastic behavior and plastic front evaluation in spot welded joints

A new analytical procedure for the evaluation of the elastic–plastic stiffness behaviour and of the plastic front in spot welded joints is presented. The spot weld joint is modelled with a new theoretical model, a circular finite plate having variable thickness and with central rigid nugget. The closed form solution of the new reference theoretical model, while plasticity effect is considered, leads to the definition of a joint element useful to FE models of multi-spot structures. This solution allows to evaluate the variation of the stiffness of the spot nugget, when the finite plate is subjected to orthogonal load, while plasticity and moderate deflections are present. Furthermore, using the new analytical procedure it is possible to determine a good accuracy in the estimation of the evolution of plastic front, with the goal of studying the local behaviour of the junction, in terms of evaluation of plasticity radius and in terms of global stiffness of the joint. The procedure can be used as the basis to develop a spot weld element in FE analysis of multi spot welded structures, able to precisely evaluate both local and overall stiffness of spot joints, even when plasticity is accounted. The theoretical procedure leads to results that match those obtained analysing the actual spot weld region by reference FE models.

[1]  Geoffrey Turvey,et al.  Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity , 2001 .

[2]  G. A. Shifrin,et al.  An experiment on circular plates in the plastic range , 1954 .

[3]  Bertrand Langrand,et al.  Détermination expérimentale du comportement mécanique et de critère de rupture d'assemblages sous chargements mixtes. Application aux rivets et points soudés , 2003 .

[4]  Francesco Vivio,et al.  A new theoretical approach for structural modelling of riveted and spot welded multi-spot structures , 2009 .

[5]  Tau Tyan,et al.  Failure loads of spot welds under combined opening and shear static loading conditions , 2002 .

[6]  J. Pan,et al.  Closed-form structural stress and stress intensity factor solutions for spot welds under various types of loading conditions , 2008 .

[7]  Francesco Vivio,et al.  A new analytical model for the elastic–plastic behaviour of spot welded joints subjected to orthogonal load , 2009 .

[8]  Soo Won Chae,et al.  An optimal design system for spot welding locations , 2002 .

[9]  On the convergence of the Chien's perturbation method for von Karman plate equations , 1995 .

[10]  Y. Chao.  Failure mode of spot welds: interfacial versus pullout , 2013 .

[11]  E. Onat,et al.  A comparison of experiments and theory in the plastic bending of circular plates , 1962 .

[12]  Jacek Skrzypek,et al.  Plasticity and Creep Theory Examples and Problems , 1993 .

[13]  Francesco Vivio,et al.  Analytical characterization of plastic flow in spot welded joints , 2014 .

[14]  Alain Combescure,et al.  A finite element to simulate the failure of weld points on impact , 2003 .

[15]  G. Eason.  The Elastic, Plastic Bending of a Simply Supported Plate , 1961 .

[16]  Pietro Salvini,et al.  Enforcing of an analytical solution of spot welds into finite element analysis for fatigue-life estimation , 2002 .

[17]  Tau Tyan,et al.  A general failure criterion for spot welds under combined loading conditions , 2003 .

[18]  Pietro Salvini,et al.  Extension of the spot weld element to the elasto-plastic case , 2007 .

[19]  Francesco Vivio,et al.  A general formulation of an analytical model for the elastic–plastic behaviour of a spot weld finite element , 2015 .

[20]  Alain Combescure,et al.  Non-linear and failure behaviour of spotwelds: a “global” finite element and experiments in pure and mixed modes I/II , 2004 .

[21]  Pietro Salvini,et al.  A spot weld finite element for structural modelling , 2000 .

[22]  Dung-An Wang,et al.  Stress intensity factors for spot welds and associated kinked cracks in cup specimens , 2005 .

[23]  F. Vivio,et al.  Closed form solutions of axisymmetric bending of circular plates having non-linear variable thickness , 2010 .

[24]  Pietro Salvini,et al.  Fatigue life evaluation for multi-spot welded structures , 2009 .

[25]  P.-C. Lin,et al.  Modeling of failure near spot welds in lap-shear specimens based on a plane stress rigid inclusion analysis , 2006 .