A transient cutting temperature prediction model for high-speed ultrasonic vibration turning

[1]  Kun-yang Lin,et al.  Analytical model of workpiece temperature in axial ultrasonic vibration-assisted milling in situ TiB2/7050Al MMCs , 2021, The International Journal of Advanced Manufacturing Technology.

[2]  Chenbing Ni,et al.  Review of ultrasonic vibration-assisted machining in advanced materials , 2020 .

[3]  S. Liang,et al.  Temperature prediction of ultrasonic vibration-assisted milling. , 2020, Ultrasonics.

[4]  Deyuan Zhang,et al.  Effects of high-pressure coolant on cutting performance of high-speed ultrasonic vibration cutting titanium alloy , 2020, Journal of Materials Processing Technology.

[5]  Augusto F. V. Campidelli,et al.  Temperature assessment when milling AISI D2 cold work die steel using tool-chip thermocouple, implanted thermocouple and finite element simulation , 2018, Applied Thermal Engineering.

[6]  Q. Fang,et al.  A nonuniform moving heat source model for temperature simulation in ultrasonic-assisted cutting of titanium alloys , 2018 .

[7]  U. S. Dixit,et al.  Estimation of workpiece-temperature during ultrasonic-vibration assisted milling considering acoustic softening , 2018 .

[8]  Melih Cemal Kuşhan,et al.  Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning , 2017, The International Journal of Advanced Manufacturing Technology.

[9]  Melih Cemal Kuşhan,et al.  Numerical investigation of hot ultrasonic assisted turning of aviation alloys , 2018 .

[10]  Deyuan Zhang,et al.  Development of a tool-workpiece thermocouple system for comparative study of the cutting temperature when high-speed ultrasonic vibration cutting Ti-6Al-4V alloys with and without cutting fluids , 2018 .

[11]  Zhang Deyuan,et al.  Surface Quality and Residual Stress Study of High-speed Ultrasonic Vibration Turning Ti-6Al-4V Alloys , 2018 .

[12]  Xinggang Jiang,et al.  Feasibility Study of High-speed Ultrasonic Vibration Cutting Titanium Alloy , 2017 .

[13]  Zhanqiang Liu,et al.  Transient and steady-state temperature distribution in monolayer-coated carbide cutting tool , 2017 .

[14]  Zhanqiang Liu,et al.  Prediction of cutting temperature distributions on rake face of coated cutting tools , 2017 .

[15]  M. Jackson,et al.  Development and application of a temperature measurement device using the tool-workpiece thermocouple method in turning at high cutting speeds , 2017 .

[16]  Mohammad Reza Razfar,et al.  Theoretical modeling of tool mean temperature during ultrasonically assisted turning , 2016 .

[17]  M. Aydın.  Cutting temperature analysis considering the improved Oxley’s predictive machining theory , 2016 .

[18]  Wenyu Yang,et al.  Analytical model of temperature field in workpiece machined surface layer in orthogonal cutting , 2016 .

[19]  Liangchi Zhang,et al.  Ultrasonic vibration-assisted machining: principle, design and application , 2015 .

[20]  Mohammad Reza Razfar,et al.  Finite element simulation and experimental investigation of tool temperature during ultrasonically assisted turning of aerospace aluminum using multicoated carbide inserts , 2014 .

[21]  Weiwei Zhu,et al.  Study on cutting temperature during milling of titanium alloy based on FEM and experiment , 2014 .

[22]  Aldo Braghini Junior,et al.  Modeling heat transfer in die milling , 2014 .

[23]  Igor Cézar Pereira,et al.  Estimation of heat flux and temperature field during drilling process using dynamic observers based on Green's function , 2012 .

[24]  Vadim V. Silberschmidt,et al.  3D finite element analysis of ultrasonically assisted turning , 2007 .

[25]  Yusuf Altintas,et al.  Prediction of tool and chip temperature in continuous and interrupted machining , 2002 .

[26]  R. Komanduri,et al.  Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source , 2001 .

[27]  Tien-Chien Jen,et al.  Cutting Tool Temperatures in Contour Turning: Transient Analysis and Experimental Verification , 1997 .

[28]  Shiv Gopal Kapoor,et al.  An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting , 1994 .