UO2 micron scale specimen fracture: Parameter identification and influence of porosities

[1]  C. Langlois,et al.  Fracture properties of an irradiated PWR UO2 fuel evaluated by micro-cantilever bending tests , 2020 .

[2]  C. Langlois,et al.  Irradiation effects on the fracture properties of UO2 fuels studied by micro-mechanical testing , 2020 .

[3]  J. Chevalier,et al.  Revisiting the strength of micron‐scale ceramic platelets , 2020, Journal of the American Ceramic Society.

[4]  D. Leguillon,et al.  Modeling the thermal shock induced cracking in ceramics , 2020, Journal of the European Ceramic Society.

[5]  R. Estevez,et al.  Fracture and Cohesive Parameter Identification of Refractories by Digital Image Correlation Up to 1200°C , 2020, Experimental Mechanics.

[6]  C. Langlois,et al.  Local fracture toughness measurements in polycrystalline cubic zirconia using micro-cantilever bending tests , 2019, Mechanics of Materials.

[7]  D. Leguillon,et al.  Experimental characterization and numerical modeling of crack initiation in rhombus hole PMMA specimens under compression , 2019, European Journal of Mechanics - A/Solids.

[8]  D. Leguillon,et al.  Comparison between cohesive zone and coupled criterion modeling of crack initiation in rhombus hole specimens under quasi-static compression , 2019, Theoretical and Applied Fracture Mechanics.

[9]  P. Cornetti,et al.  Finite fracture mechanics and cohesive crack model: Weight functions vs. cohesive laws , 2019, International Journal of Solids and Structures.

[10]  D. Leguillon,et al.  Comparison between 2D and 3D applications of the coupled criterion to crack initiation prediction in scarf adhesive joints , 2018, International Journal of Adhesion and Adhesives.

[11]  O. Ševeček,et al.  Understanding the tensile strength of ceramics in the presence of small critical flaws , 2018, Engineering Fracture Mechanics.

[12]  D. Leguillon,et al.  Numerical modeling of the nucleation of facets ahead of a primary crack under mode I + III loading , 2018, International Journal of Fracture.

[13]  O. Ševeček,et al.  What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation? , 2018, International Journal of Fracture.

[14]  D. Leguillon,et al.  3D application of the coupled criterion to crack initiation prediction in epoxy/aluminum specimens under four point bending , 2018, International Journal of Solids and Structures.

[15]  Anthony Gravouil,et al.  2D and 3D Abaqus implementation of a robust staggered phase-field solution for modeling brittle fracture , 2017 .

[16]  A. Carpinteri,et al.  Short cracks and V-notches: Finite Fracture Mechanics vs. Cohesive Crack Model , 2016 .

[17]  D. Leguillon,et al.  Initiation of edge debonding: coupled criterion versus cohesive zone model , 2016, International Journal of Fracture.

[18]  N. Young,et al.  Microcantilever investigation of fracture toughness and subcritical crack growth on the scale of the microstructure in Al2O3 , 2015 .

[19]  G. Dehm,et al.  Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon , 2015 .

[20]  D. Leguillon.  An attempt to extend the 2D coupled criterion for crack nucleation in brittle materials to the 3D case , 2014 .

[21]  M. Anglada,et al.  Small-scale mechanical behavior of zirconia , 2014 .

[22]  J. Réthoré,et al.  Identification of a cohesive zone model from digital images at the micron-scale , 2013 .

[23]  J. Sercombe,et al.  Experimental and numerical study of Fracture mechanisms in UO2 nuclear fuel , 2013 .

[24]  D. Leguillon,et al.  A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate , 2012 .

[25]  S. V. D. Berghe,et al.  Chromia doped UO2 fuel: Investigation of the lattice parameter , 2012 .

[26]  N. Chevaugeon,et al.  A level set based model for damage growth: The thick level set approach , 2011 .

[27]  Christian Miehe,et al.  Thermodynamically consistent phase‐field models of fracture: Variational principles and multi‐field FE implementations , 2010 .

[28]  T. Detzel,et al.  Interface fracture properties of thin films studied by using the micro-cantilever deflection technique , 2009 .

[29]  J. Sercombe,et al.  3D fuel cracking modelling in pellet cladding mechanical interaction , 2008 .

[30]  G. Thouvenin,et al.  A new phenomenological criterion for pellet–cladding interaction rupture , 2008 .

[31]  B. Bourdin,et al.  The Variational Approach to Fracture , 2008 .

[32]  Pedro P. Camanho,et al.  An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .

[33]  Carole Henninger,et al.  Crack initiation at a V-notch—comparison between a brittle fracture criterion and the Dugdale cohesive model , 2007 .

[34]  G. Alfano.  On the influence of the shape of the interface law on the application of cohesive-zone models , 2006 .

[35]  D. Maio,et al.  Erratum to: Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams , 2005 .

[36]  T. Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[37]  L. Tenerz,et al.  Fracture testing of silicon microelements in situ in a scanning electron microscope , 1988 .

[38]  K. C. Radford.  Effect of fabrication parameters and microstructure on the mechanical strength of UO2 fuel pellets , 1979 .

[39]  J. T. A. Roberts,et al.  Deformation of UO2 at High Temperatures , 1971 .

[40]  A. G. Evans,et al.  The strength and fracture of stoichiometric polycrystalline UO2 , 1969 .

[41]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[42]  C. Fagiano,et al.  Damage onset modeling in woven composites based on a coupled stress and energy criterion , 2017 .

[43]  W. Becker,et al.  A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers , 2016 .

[44]  V. Mantič,et al.  Fiber-size effects on the onset of fiber–matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models , 2014 .

[45]  V. Acary,et al.  Nonsmooth fracture dynamics using a cohesive zone approach , 2006 .

[46]  Dominique Leguillon,et al.  Strength or toughness? A criterion for crack onset at a notch , 2002 .

[47]  G. I. Barenblatt.  The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks , 1959 .