Quantitative examination of carbide and sulphide precipitates in chemically complex steels processed by direct strip casting

A high strength low alloy steel composition has been melted and processed by two different routes: simulated direct strip casting and slow cooled ingot casting. The microstructures were examined with scanning and transmission electron microscopy, atom probe tomography and small angle neutron scattering (SANS). The formation of cementite (Fe3C), manganese sulphides (MnS) and niobium carbo-nitrides (Nb(C,N)) was investigated in both casting conditions. The sulphides were found to be significantly refined by the higher cooling rate, and developed an average diameter of only 100 nm for the fast cooled sample, and a diameter too large to be measured with SANS in the slow cooled condition (> 1.1 μm). Slow cooling resulted in the development of classical Nb(C,N) precipitation, with an average diameter of 7.2 nm. However, after rapid cooling both the SANS and atom probe tomography data indicated that the Nb was retained in the matrix as a random solid solution. There was also some evidence that O, N and S are also retained in solid solution in levels not found during conventional processing.

[1]  J. M. Hastings,et al.  MAGNETIC STRUCTURES OF THE POLYMORPHIC FORMS OF MANGANOUS SULFIDE , 1956 .

[2]  Harold R Kaul,et al.  High Strength and Retained Ductility Achieved in a Nitrided Strip Cast Nb-Microalloyed Steel , 2013, Metallurgical and Materials Transactions A.

[3]  Patrik Schmuki,et al.  The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion , 2005 .

[4]  P. Hodgson,et al.  Static recrystallization of strip cast alloys in the presence of complex nano-sulfide and nitride precipitates , 2013 .

[5]  H. Zou,et al.  Carbonitride precipitate growth in titanium/niobium microalloyed steels , 1991 .

[6]  G. Fournet,et al.  Small‐Angle Scattering of X‐Rays , 1956 .

[7]  V. F. Sears.  Neutron scattering lengths and cross sections , 1992 .

[8]  Joe Herbertson,et al.  Experimental Studies of Interfacial Heat Transfer and Initial Solidification Pertinent to Strip Casting , 1998 .

[9]  A. Deschamps,et al.  Quantitative Characterization of Precipitate Microstructures in Metallic Alloys Using Small-Angle Scattering , 2012, Metallurgical and Materials Transactions A.

[10]  K. A. Taylor.  Solubility products for titanium-, vanadium-, and niobium-carbide in ferrite , 1995 .

[11]  S. Ringer,et al.  Effect of Nb Microalloying and Hot Rolling on Microstructure and Properties of Ultrathin Cast Strip Steels Produced by the CASTRIP® Process , 2011 .

[12]  A. Deschamps,et al.  A small‐angle neutron scattering study of fine‐scale NbC precipitation kinetics in the α‐Fe–Nb–C system , 2006 .

[13]  Baptiste Gault,et al.  Atom Probe Microscopy , 2012 .

[14]  E. Storms,et al.  The Variation of Lattice Parameter with Carbon Content of Niobium Carbide , 1959 .

[15]  G. A. Jeffrey,et al.  On the cementite structure , 1965 .

[16]  R. Honeycombe.  Steels, Microstructure and Properties , 1982 .

[17]  M. K. Miller,et al.  Atom-Probe Tomography: The Local Electrode Atom Probe , 2014 .

[18]  S. Marich,et al.  Sulfide inclusions in iron , 1970 .

[19]  J. Brunvoll,et al.  On the Properties of alpha-MnS and MnS2. , 1965 .

[20]  Simon P. Ringer,et al.  Strengthening from Nb-rich clusters in a Nb-microalloyed steel , 2012 .