Spherical instrumented indentation as a tool to characterize porous bioceramics and their resorption

[1]  J. Chevalier,et al.  Resorption of calcium phosphate materials: Considerations on the in vitro evaluation , 2018 .

[2]  C. Persson,et al.  Elastic properties and strain-to-crack-initiation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique. , 2017, Journal of the mechanical behavior of biomedical materials.

[3]  J. Chevalier,et al.  The in vitro evolution of resorbable brushite cements: A physico-chemical, micro-structural and mechanical study. , 2017, Acta biomaterialia.

[4]  E. Maire,et al.  Fracture behavior of robocast HA/β-TCP scaffolds studied by X-ray tomography and finite element modeling , 2017 .

[5]  Anke Bernstein,et al.  Characterization and distribution of mechanically competent mineralized tissue in micropores of β-tricalcium phosphate bone substitutes , 2017 .

[6]  Mathias Göken,et al.  Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation , 2017 .

[7]  N. Brandon,et al.  Analysis of spherical indentation of porous ceramic films , 2017 .

[8]  Sylvain Meille,et al.  Selective etching of injection molded zirconia-toughened alumina: Towards osseointegrated and antibacterial ceramic implants. , 2016, Acta biomaterialia.

[9]  L. M. Grover,et al.  Visualising phase change in a brushite-based calcium phosphate ceramic , 2016, Scientific Reports.

[10]  C. Persson,et al.  Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements. , 2016, Journal of the mechanical behavior of biomedical materials.

[11]  N. Brandon,et al.  Spherical indentation of porous ceramics: Elasticity and hardness , 2016 .

[12]  J. Chevalier,et al.  Identification of a damage criterion of a highly porous alumina ceramic , 2016 .

[13]  M. Gallo.  In-vitro degradation of calcium phosphate bone substitutes : Coupled monitoring of the evolution of mechanical, microstructural and physico-chemical properties of DCPD and β-TCP samples , 2015 .

[14]  C. Persson,et al.  Long-Term In Vitro Degradation of a High-Strength Brushite Cement in Water, PBS, and Serum Solution , 2015, BioMed research international.

[15]  A. Boccaccini,et al.  The role of osteoclasts in bone tissue engineering , 2015, Journal of tissue engineering and regenerative medicine.

[16]  Gerald Q. Maguire,et al.  Using PET/CT Bone Scan Dynamic Data to Evaluate Tibia Remodeling When a Taylor Spatial Frame Is Used: Short and Longer Term Differences , 2015, BioMed research international.

[17]  R. Cook,et al.  The compelling case for indentation as a functional exploratory and characterization tool , 2015 .

[18]  Zhangwei Chen,et al.  Microstructural characteristics and elastic modulus of porous solids , 2015 .

[19]  Surya R. Kalidindi,et al.  Spherical nanoindentation stress–strain curves , 2015 .

[20]  Zhangwei Chen,et al.  Fracture Toughness of Porous Material of LSCF in Bulk and Film Forms , 2015, Journal of the American Ceramic Society. American Ceramic Society.

[21]  Stéphane Roux,et al.  Digital Volume Correlation Applied to X‐ray Tomography Images from Spherical Indentation Tests on Lightweight Gypsum , 2014 .

[22]  Guillaume Delattre,et al.  Identification of the hardening law of materials with spherical indentation using the average representative strain for several penetration depths , 2014 .

[23]  Zhangwei Chen,et al.  Surface quality improvement of porous thin films suitable for nanoindentation , 2014, 1502.02133.

[24]  F. Tancret,et al.  Calcium phosphate cements for bone substitution: chemistry, handling and mechanical properties. , 2014, Acta biomaterialia.

[25]  J. Chevalier,et al.  Mechanical characterization of highly porous inorganic solids materials by instrumented micro-indentation , 2013 .

[26]  P. Clément.  Détermination des propriétés mécaniques de céramiques poreuses par essais de microindentation instrumentée sphérique , 2013 .

[27]  Christophe L. Martin,et al.  Simulation of the elastic properties of porous ceramics with realistic microstructure , 2012 .

[28]  J. Chevalier,et al.  Bone micromechanical properties are compromised during long‐term alendronate therapy independently of mineralization , 2012, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[29]  A. Leriche,et al.  Influence of porosity on the mechanical properties of microporous β-TCP bioceramics by usual and instrumented Vickers microindentation , 2011 .

[30]  G. Niebur,et al.  The effect of holding time on nanoindentation measurements of creep in bone. , 2011, Journal of biomechanics.

[31]  R. Detsch,et al.  How Degradation of Calcium Phosphate Bone Substitute Materials is influenced by Phase Composition and Porosity , 2011 .

[32]  F. O'Brien.  Biomaterials & scaffolds for tissue engineering , 2011 .

[33]  J. Malzbender,et al.  Micro- and macro-indentation behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3−d perovskite , 2011 .

[34]  Michelle L. Oyen,et al.  Viscous-elastic-plastic behavior of bone using Berkovich nanoindentation , 2010 .

[35]  Daniel C Bridges,et al.  Microindentation for In Vivo Measurement of Bone Tissue Mechanical Properties in Humans , 2010, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[36]  A. Fritsch,et al.  Micromechanical Explanation of Elasticity and Strength of Gypsum: From Elongated Anisotropic Crystals to Isotropic Porous Polycrystals , 2010 .

[37]  R. Cook,et al.  A practical guide for analysis of nanoindentation data. , 2009, Journal of the mechanical behavior of biomedical materials.

[38]  V. Ferguson.  Deformation partitioning provides insight into elastic, plastic, and viscous contributions to bone material behavior. , 2009, Journal of the mechanical behavior of biomedical materials.

[39]  M. Worsley,et al.  Depth-sensing indentation of low-density brittle nanoporous solids , 2009 .

[40]  E. Gartner.  Cohesion and expansion in polycrystalline solids formed by hydration reactions — The case of gypsum plasters , 2009 .

[41]  A. Giraud,et al.  Parameter sensitivity analysis for a Drücker–Prager model following from numerical simulations of indentation tests , 2008 .

[42]  G. Kermouche,et al.  Mechanical modelling of indentation-induced densification in amorphous silica , 2008 .

[43]  M. Swain,et al.  Mechanical behaviour of porous hydroxyapatite. , 2008, Acta biomaterialia.

[44]  W. Yeong,et al.  Engineering functionally graded tissue engineering scaffolds. , 2008, Journal of the mechanical behavior of biomedical materials.

[45]  Mahalia Miller,et al.  Surface Roughness Criteria for Cement Paste Nanoindentation , 2008 .

[46]  Franz-Josef Ulm,et al.  Hardness-packing density scaling relations for cohesive-frictional porous materials , 2008 .

[47]  Alexander J. Moseson,et al.  Determination of the effective zero point of contact for spherical nanoindentation , 2008 .

[48]  M. Saâdaoui,et al.  Water effect on internal friction of set plaster , 2006 .

[49]  Alexander J. Moseson,et al.  On the determination of spherical nanoindentation stress–strain curves , 2006 .

[50]  M. Saâdaoui,et al.  Internal friction study of the influence of humidity on set plaster , 2005 .

[51]  Michael V Swain,et al.  Characterising the micro-mechanical behaviour of the carious dentine of primary teeth using nano-indentation. , 2005, Journal of biomechanics.

[52]  B. Lawn,et al.  Hertzian Contact Damage in Porous Alumina Ceramics , 2005 .

[53]  Yang-Tse Cheng,et al.  Scaling, dimensional analysis, and indentation measurements , 2004 .

[54]  F. Peters,et al.  Functional Materials for Bone Regeneration from Beta‐Tricalcium Phosphate , 2004 .

[55]  R. Cook,et al.  Depth-sensing indentation response of ordered silica foam , 2004 .

[56]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[57]  J. Lambropoulos,et al.  Spherical cavity expansion in densifying material , 2003 .

[58]  J C Knowles,et al.  In vitro ageing of brushite calcium phosphate cement. , 2003, Biomaterials.

[59]  T. Ohji,et al.  Hertzian contact damage in a highly porous silicon nitride ceramic , 2003 .

[60]  Jacques Desrues,et al.  Limitations du choix de l'angle de frottement pour le critère de plasticité de Drucker-Prager , 2002 .

[61]  M. H. Leite,et al.  Determination of unconfined compressive strength and Young's modulus of porous materials by indentation tests , 2001 .

[62]  M Bohner,et al.  Calcium orthophosphates in medicine: from ceramics to calcium phosphate cements. , 2000, Injury.

[63]  Teng-fong Wong,et al.  Mechanical Compaction of Porous Sandstone , 1999 .

[64]  J. Chappuis.  A new model for a better understanding of the cohesion of hardened hydraulic materials , 1999 .

[65]  T. McMahon,et al.  Results from demineralized bone creep tests suggest that collagen is responsible for the creep behavior of bone. , 1999, Journal of biomechanical engineering.

[66]  B. Lawn.  Indentation of Ceramics with Spheres: A Century after Hertz , 1998 .

[67]  Roy W. Rice,et al.  Porosity of Ceramics: Properties and Applications , 1998 .

[68]  Sandrine Bec,et al.  Improvements in the indentation method with a surface force apparatus , 1996 .

[69]  Michael V. Swain,et al.  A simple predictive model for spherical indentation , 1993 .

[70]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[71]  K. Groot,et al.  Effect of Porosity and Physicochemical Properties on the Stability, Resorption, and Strength of Calcium Phosphate Ceramics , 1988 .

[72]  George Y. Baladi,et al.  Generalized Cap Model for Geological Materials , 1976 .

[73]  M. C. Shaw,et al.  The plastic behavior of cellular materials , 1966 .

[74]  Stéphane Roux,et al.  Identification of the crushing behavior of brittle foam: From indentation to oedometric tests , 2017 .

[75]  H. Yan,et al.  Spherical instrumented indentation of porous nanocrystalline zirconia , 2012 .

[76]  J. Chevalier,et al.  Degradation of Bioceramics , 2012 .

[77]  M. Swain,et al.  Understanding the mechanical behaviour of human enamel from its structural and compositional characteristics. , 2008, Journal of the mechanical behavior of biomedical materials.

[78]  Laurent Chazeau,et al.  Toughening of bio-ceramics scaffolds by polymer coating , 2007 .

[79]  G. E. Andreev.  Brittle failure of rock materials : test results and constitutive models , 1995 .

[80]  Helmut Schweiger,et al.  On the use of drucker-prager failure criteria for earth pressure problems , 1994 .

[81]  R. Borst,et al.  Non-Associated Plasticity for Soils, Concrete and Rock , 1984 .

[82]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[83]  Edward J. Garboczi,et al.  Institute of Physics Publishing Modelling and Simulation in Materials Science and Engineering Linear Elastic Properties of 2d and 3d Models of Porous Materials Made from Elongated Objects , 2022 .