An experimental study of acoustic emission methodology for in service condition monitoring of wind turbine blades

A laboratory study is reported regarding fatigue damage growth monitoring in a complete 45.7 m long wind turbine blade typically designed for a 2 MW generator. The main purpose of this study was to investigate the feasibility of in-service monitoring of the structural health of blades by acoustic emission (AE). Cyclic loading by compact resonant masses was performed to accurately simulate in-service load conditions and 187 kcs of fatigue were performed over periods which totalled 21 days, during which AE monitoring was performed with a 4 sensor array. Before the final 8 days of fatigue testing a simulated rectangular defect of dimensions 1 m × 0.05 m × 0.01 m was introduced into the blade material. The growth of fatigue damage from this source defect was successfully detected from AE monitoring. The AE signals were correlated with the growth of delamination up to 0.3 m in length and channel cracking in the final two days of fatigue testing. A high detection threshold of 40 dB was employed to suppress AE noise generated by the fatigue loading, which was a realistic simulation of the noise that would be generated in service from wind impact and acoustic coupling to the tower and nacelle. In order to decrease the probability of false alarm, a threshold of 45 dB was selected for further data processing. The crack propagation related AE signals discovered by counting only received pulse signals (bursts) from 4 sensors whose arrival times lay within the maximum variation of travel times from the damage source to the different sensors in the array. Analysis of the relative arrival times at the sensors by triangulation method successfully determined the location of damage growth, which was confirmed by photographic evidence. In view of the small scale of the damage growth relative to the blade size that was successfully detected, the developed AE monitoring methodology shows excellent promise as an in-service blade integrity monitoring technique capable of providing early warnings of developing damage before it becomes too expensive to repair.

[1]  C. Santulli,et al.  Characterization of failure modes in compression-after impact of glass–epoxy composite laminates using acoustic emission monitoring , 2015 .

[2]  G. A. Georgiou,et al.  A review of NDT techniques for wind turbines , 2007 .

[3]  Yi-Qing Ni,et al.  A review of full-scale structural testing of wind turbine blades , 2014 .

[4]  Renaud Gutkin,et al.  On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses , 2011 .

[5]  Emmanuel Ramasso,et al.  A signal processing approach for enhanced Acoustic Emission data analysis in high activity systems: Application to organic matrix composites , 2016 .

[6]  F. L. D. Scalea,et al.  Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structures , 2007 .

[7]  Christopher Baker,et al.  Transverse cracking in carbon fiber reinforced polymer composites: Modal acoustic emission and peak frequency analysis , 2015 .

[8]  Udayanga Galappaththi,et al.  Review of inspection and quality control techniques for composite wind turbine blades , 2012 .

[9]  Athanassios Manikas,et al.  Source Localization Using Sparse Large Aperture Arrays , 2012, IEEE Transactions on Signal Processing.

[10]  James A. Sherwood,et al.  Inspection and monitoring of wind turbine blade-embedded wave defects during fatigue testing , 2014 .

[11]  H. Lamb.  On waves in an elastic plate , 1917 .

[12]  Huan Liu,et al.  An Identification Method of Appearances and Expansion of Fatigue Crack in the Wind Turbine Blade Based on Fractal Feature , 2012 .

[13]  A. Lystrup,et al.  Composite materials for wind power turbine blades , 2005 .

[14]  Rhys Pullin,et al.  Use of Macro Fibre Composite Transducers as Acoustic Emission Sensors , 2009, Remote. Sens..

[15]  Markus G. R. Sause,et al.  INVESTIGATION OF PENCIL-LEAD BREAKS AS ACOUSTIC EMISSION SOURCES , 2011 .

[16]  L. N. Stepanova,et al.  A procedure for locating acoustic-emission signals during static testing of carbon composite samples , 2015, Russian Journal of Nondestructive Testing.

[17]  Brian Vick,et al.  Effect of blade flutter and electrical loading on small wind turbine noise , 2013 .

[18]  Chiara Grappasonni,et al.  Development of a FBG based distributed strain sensor system for wind turbine structural health monitoring , 2013 .

[19]  Wenxian Yang,et al.  Research on a power quality monitoring technique for individual wind turbines , 2015 .

[20]  Leonard J. Bond,et al.  Acoustic emission monitoring of wind turbine blades , 2015, Smart Structures.

[21]  Patrick Guillaume,et al.  Structural health monitoring of offshore wind turbines using automated operational modal analysis , 2014 .

[22]  A. G. Dutton,et al.  Acoustic Emission Monitoring of Small Wind Turbine Blades , 2002 .

[23]  M. Pharaoh,et al.  Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event , 2004 .

[24]  Brian M. Sadler,et al.  Source localization with distributed sensor arrays and partial spatial coherence , 2004, IEEE Transactions on Signal Processing.