Higher-order mode fiber enables high energy chirped-pulse amplification.

Energy scaling of femtosecond fiber lasers has been constrained by nonlinear impairments and optical fiber damage. Reducing the optical irradiance inside the fiber by increasing mode size lowers these effects. Using an erbium-doped higher-order mode fiber with 6000 µm(2) effective area and output fundamental mode re-conversion, we show a breakthrough in pulse energy from a monolithic fiber chirped pulse amplification system using higher-order mode propagation generating 300 µJ pulses with duration <500 fs (FWHM) and peak power >600 MW at 1.55 µm. The erbium-doped HOM fiber has both a record large effective mode area and excellent mode stability, even when coiled to reasonable diameter. This demonstration proves efficacy of a new path for high energy monolithic fiber-optic femtosecond laser systems.

[1]  Robert A. Taylor,et al.  Nanofluid-based optical filter optimization for PV/T systems , 2012, Light: Science & Applications.

[2]  P. Russell.  Photonic Crystal Fibers , 2003, Science.

[3]  M. E. Fermann,et al.  Ultrafast high energy amplifiers beyond the B-integral limit , 2006, SPIE LASE.

[4]  P. French,et al.  The generation of ultrashort laser pulses , 1995 .

[5]  Jun Li,et al.  Leakage channel optical fibers with large effective area , 2007 .

[6]  J. Limpert,et al.  High-power rod-type photonic crystal fiber laser. , 2005, Optics express.

[7]  B. Stuart,et al.  Self-phase modulation in chirped-pulse amplification. , 1994, Optics letters.

[8]  Jonathan Knight,et al.  Large mode area photonic crystal fibre , 1998 .

[9]  S. Singh,et al.  Nonlinear Effects in Optical Fibers: Origin, Management and Applications , 2007 .

[10]  J. Limpert,et al.  High Repetition Rate Gigawatt Peak Power Fiber Laser Systems: Challenges, Design, and Experiment , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[11]  Gerard Mourou,et al.  1000 times expansion/compression of optical pulses for chirped pulse amplification , 1987 .

[12]  Almantas Galvanauskas,et al.  Ultrashort-Pulse Fiber Amplifiers , 2002 .

[14]  J. Limpert,et al.  High-power ultrafast fiber laser systems , 2006, IEEE Journal of Selected Topics in Quantum Electronics.

[15]  J W Nicholson,et al.  Scaling the effective area of higher-order-mode erbium-doped fiber amplifiers. , 2012, Optics express.

[16]  E. Treacy.  Optical pulse compression with diffraction gratings , 1969 .

[17]  Jonathan Knight,et al.  Large mode area photonic crystal fiber , 1998 .

[18]  J W Nicholson,et al.  Light propagation with ultralarge modal areas in optical fibers. , 2006, Optics letters.

[19]  Jie Zong,et al.  High efficiency, monolithic fiber chirped pulse amplification system for high energy femtosecond pulse generation. , 2013, Optics express.

[20]  Femtosecond fiber CPA system based on picosecond master oscillator and power amplifier with CCC fiber. , 2013, Optics express.

[21]  K. Hougaard,et al.  Amplifiers and Lasers in PCF Configurations , 2004 .

[22]  Cesar Jauregui,et al.  Yb-doped large-pitch fibres: effective single-mode operation based on higher-order mode delocalisation , 2012, Light: Science & Applications.

[23]  Cesar Jauregui,et al.  Fiber chirped-pulse amplification system emitting 3.8 GW peak power. , 2011, Optics express.

[24]  J. Fini,et al.  Intuitive modeling of bend distortion in large-mode-area fibers. , 2007, Optics letters.