Capacity limits of LoRaWAN technology for smart metering applications

In this paper we analyze and discuss the capacity limits of LoRaWAN technology for smart metering applications using a real LoRa network simulator including uplink and downlink. First, we present the modeling of the network simulator. Then results for a critical case in the center of Paris show that, with meters all located deep indoor, the capacity of a network covering a dense urban area of 17 km2 with 19 gateways distant from 1 km, considering only UL emissions, could be enough for an average targeted QoS of 98 % as soon as there is no other traffic in the considered band. But we also show that we could very quickly reach the limits when considering that meters will not be the only LoRa devices communicating and above all considering the important impact of DL emissions on capacity.

[1]  Konstantin Mikhaylov,et al.  Evaluation of LoRa LPWAN technology for remote health and wellbeing monitoring , 2016, 2016 10th International Symposium on Medical Information and Communication Technology (ISMICT).

[2]  L.M. Correia,et al.  Characterisation of Signal Penetration into Buildings for GSM and UMTS , 2006, 2006 3rd International Symposium on Wireless Communication Systems.

[3]  Thomas Watteyne,et al.  Understanding the Limits of LoRaWAN , 2016, IEEE Communications Magazine.

[4]  Preben E. Mogensen,et al.  Path loss validation for urban micro cell scenarios at 3.5 GHz compared to 1.9 GHz , 2013, 2013 IEEE Global Communications Conference (GLOBECOM).

[5]  Thomas H. Clausen,et al.  A Study of LoRa: Long Range & Low Power Networks for the Internet of Things , 2016, Sensors.