Initiation of a Confined Finite‐Thickness Explosive under the Impact of Shaped Charge Jet

[1]  Xin Jia,et al.  Critical Initiation Threshold of Covered Finite Thickness Explosive under Impact of Shaped Charge Jet , 2021, Propellants, Explosives, Pyrotechnics.

[2]  Kun Yang,et al.  Shaped‐Charge Jet‐Initiation of Covered RDX‐Based Aluminized Explosives and Effect of Temperature , 2020 .

[3]  Jiong Wang,et al.  Initiation of shaped charge into booster devices , 2020, Journal of Energetic Materials.

[4]  Zhengxiang Huang,et al.  Study on Interaction Mechanism between the Shaped Charge Jet and Thick Moving Target , 2019, Propellants, Explosives, Pyrotechnics.

[5]  T. Hartmann,et al.  Filling the gap between hypervelocity and low velocity impacts , 2019, International Journal of Impact Engineering.

[6]  Qiang Liu,et al.  Influence of layer number and air gap on the ballistic performance of multi-layered targets subjected to high velocity impact by copper EFP , 2018 .

[7]  Kyung-Young Jhang,et al.  Relative measurement of the acoustic nonlinearity parameter using laser detection of an ultrasonic wave , 2017 .

[8]  D. Guildenbecher,et al.  Characterization of hypervelocity metal fragments for explosive initiation , 2017 .

[9]  Wang Li-xi.  Reaction Characteristics for Shelled Cast-cured PBX Explosive Impacted by Shaped Charge Jet , 2015 .

[10]  Brian E. Fuchs,et al.  Development of a Small Shaped Charge Insensitive Munitions Threat Test , 2015 .

[11]  Nicholas R. Peterson,et al.  Method for Prediction of Fragment Impact Response Using Physics Based Modeling and Statistical Analysis , 2015 .

[12]  Ping Tan,et al.  Finite element simulation of the behaviours of laminated armour systems against blast wave and projectile dynamic impacts , 2013 .

[13]  Brian E. Fuchs,et al.  Shaped Charge Jet Characterization and Initiation Test Configuration for IM Threat Testing , 2013 .

[14]  H. S. Yadav,et al.  Critical Shock Energy and Shock and Detonation Parameters of an Explosive , 2009 .

[15]  M. Cartwright,et al.  Non-Solid Explosives for Shaped Charges. Part II. Target Penetration with Metal Liner Devices Using Sensitized Nitromethane Liquid Explosive , 2009 .

[16]  P. A. Urtiew,et al.  Shock initiation of composition B and C-4 explosives: Experiments and modeling , 2008 .

[17]  I. F. Kobylkin.  Calculation of the critical detonation diameter of explosive charges using data on their shock-wave initiation , 2006 .

[18]  M. Held.  Initiation Criteria of High Explosives at different projectile or jet densities , 1996 .

[19]  M. Held.  Shaped Charge Jet Initiation on Explosive Charges equipped with barriers made up of various materials , 1994 .

[20]  H. James.  Predicting the response of explosives to attack by high-density shaped-charge jets , 1989 .

[21]  T. Bussell,et al.  The effect of minimum detonation diameter on the mechanism of jet initiation of bare explosives , 1988 .

[22]  M. Keefe,et al.  Penetration by stretching projectiles , 1988 .

[23]  M. Held.  Discussion of the Experimental Findings from the initiation of covered, but unconfined high explosive charges with shaped charge jets , 1987 .

[24]  M. Held.  Experiments of Initiation of Covered, but Unconfined High Explosive Charges by means of shaped charge jets , 1987 .

[25]  R. E. Setchell.  Ramp-wave initiation of granular explosives , 1981 .

[26]  A. Tate,et al.  Further results in the theory of long rod penetration , 1969 .