Modeling Strategies for Large Eddy Simulation of Lean Burn Spray Flames

[1]  Antonio Andreini,et al.  Multi-Coupled Numerical Analysis of Advanced Lean Burn Injection Systems , 2014 .

[2]  Salvador Navarro-Martinez,et al.  Numerical investigation of swirling kerosene spray flames using Large Eddy Simulation , 2012 .

[3]  F. Ducros,et al.  A thickened flame model for large eddy simulations of turbulent premixed combustion , 2000 .

[4]  R. Koch,et al.  Compressible large eddy simulation of turbulent combustion in complex geometry on unstructured meshes , 2004 .

[5]  S. A. Morsi,et al.  An investigation of particle trajectories in two-phase flow systems , 1972, Journal of Fluid Mechanics.

[6]  Hameed Metghalchi,et al.  Laminar burning speed measurement of premixed n-decane/air mixtures using spherically expanding fl , 2012 .

[7]  Dong-Hyon Sheen.  Swirl-stabilised turbulent spray flames in an axisymmetric model combustor , 1993 .

[8]  A. Gosman,et al.  Aspects of Computer Simulation of Liquid-Fueled Combustors , 1983 .

[9]  Rakesh Yadav,et al.  A Comparative Computational Fluid Dynamics Study on Flamelet-Generated Manifold and Steady Laminar Flamelet Modeling for Turbulent Flames , 2014 .

[10]  D. Lilly,et al.  A proposed modification of the Germano subgrid‐scale closure method , 1992 .

[11]  Richard J. Blint,et al.  The Relationship of the Laminar Flame Width to Flame Speed , 1986 .

[12]  A Andrea Donini,et al.  The implementation of five-dimensional FGM combustion model for the simulation of a gas turbine model combustor , 2015 .

[13]  Konstantina Vogiatzaki,et al.  Large-eddy simulation of spray combustion in a gas turbine combustor , 2014 .

[14]  Antonio Andreini,et al.  Assessment of Scale-Resolved Computational Fluid Dynamics Methods for the Investigation of Lean Burn Spray Flames , 2017 .

[15]  Rakesh Yadav,et al.  Numerical Computation of a Turbulent Lifted Flame Using Flamelet Generated Manifold With Different Progress Variable Definitions , 2015 .

[16]  T. F. Smith,et al.  Evaluation of Coefficients for the Weighted Sum of Gray Gases Model , 1982 .

[17]  W. Sirignano,et al.  Droplet vaporization model for spray combustion calculations , 1989 .

[18]  S. Pope.  Ten questions concerning the large-eddy simulation of turbulent flows , 2004 .

[19]  Thierry Poinsot,et al.  Effects of mesh resolution on large eddy simulation of reacting flows in complex geometry combustors , 2008 .

[20]  S. Sazhin.  Advanced models of fuel droplet heating and evaporation , 2006 .

[21]  Heinz Pitsch,et al.  Large-Eddy Simulation for Combustion Systems: Modeling Approaches for Partially Premixed Flows , 2010 .

[22]  C. Westbrook,et al.  Simplified Reaction Mechanisms for the Oxidation of Hydrocarbon Fuels in Flames , 1981 .

[23]  Thierry Poinsot,et al.  Large Eddy Simulations of gaseous flames in gas turbine combustion chambers , 2012 .

[24]  Christoph Hassa,et al.  Spray and Flame Structure of a Generic Injector at Aeroengine Conditions , 2012 .

[25]  D. Joseph,et al.  Breakup of a liquid drop suddenly exposed to a high-speed airstream , 1999 .

[26]  Denis Veynante,et al.  Implementation of a dynamic thickened flame model for large eddy simulations of turbulent premixed combustion , 2011 .

[27]  Wolfgang Polifke,et al.  An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure , 1997 .

[28]  Christoph Hassa,et al.  Measurement of Initial Conditions of a Kerosene Spray from a Generic Aeroengine Injector at Elevated Pressure , 2011 .

[29]  Jeffrey M. Bergthorson,et al.  Scale-Adaptive and Large Eddy Simulations of a Turbulent Spray Flame in a Scaled Swirl-Stabilized Gas Turbine Combustor Using Strained Flamelets , 2015 .