论文信息 - Reduction of Turn-On Voltage in a Single Layer Structured Organic Light-Emitting Diode using Nanocomposites SiO2:PHF

Reduction of Turn-On Voltage in a Single Layer Structured Organic Light-Emitting Diode using Nanocomposites SiO2:PHF

Polymer light-emitting diode with ITO/PHF/Al structure has been fabricated, where PHF is poly (4,4'-diphenylene diphenylvinylene). The original device has turn-on voltage at 18.0 V. A reduction of turn-on voltage of this device is achieved by using the nanocomposites layer consisting of PHF and SiO2 nanoparticles as an emitting layer in a single structured ITO/nanocomposite/Al polymer light emitting diode. The SiO2: PHF was prepared by mixing 1.0 ml of PHF with 0.05 ml of SiO2 colloidal solution. It was found that the spin-coated nanocomposites has reduced the OLED turn-on voltage to 9.0 V.

[1] P. C. Chui,et al. Improved performance of OLEDs with ITO surface treatments , 2005 .

[2] Hany Aziz,et al. CuPc buffer layer role in OLED performance: a study of the interfacial band energies , 2004 .

[3] Zhang Zhi-feng,et al. Organic light-emitting diodes with a nanostructured TiO2 layer at the interface between ITO and NPB layers , 2003 .

[4] J. C. Scott,et al. Enhanced luminance in polymer composite light emitting devices , 1997 .

[5] Stephen R. Forrest,et al. The stacked OLED (SOLED): A new type of organic device for achieving high-resolution full-color displays , 1997 .

[6] P. C. Chui,et al. Nanocomposite hole injection layer for organic device applications , 2005 .

[7] J. J. M. Vleggaar,et al. Stability of polymer LEDs , 1998 .

[8] Dongge Ma,et al. A pentacene-doped hole injection layer for organic light-emitting diodes , 2005 .

[9] Xiao Buwen,et al. Enhancement of hole injection with an ultra-thin Ag2O modified anode in organic light-emitting diodes , 2005, Microelectron. J..

[10] Ian D. Parker,et al. Carrier tunneling and device characteristics in polymer light-emitting diodes , 1994, Photonics West - Lasers and Applications in Science and Engineering.