Impact of trace graphene oxide in coagulation bath on morphology and performance of polysulfone ultrafiltration membrane

This paper aimed to systematically investigate the effect of trace graphene oxide (GO) nanosheets in coagulation bath on the morphology, surface property, mechanical strength and separation property of the polysulfone (PS) membranes fabricated via non-solvent induced phase inversion process. For comparison, PS membranes were fabricated in pure water and GO containing coagulation bath, respectively. The synthesized membranes were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), contact angle goniometry, tensile strength measurement, etc. The hydrophilicity of the PS membranes increased with the increasing of GO concentration. Compared to the PS membranes synthesized in pure water coagulation bath, the skin layer of the PS/GO membranes synthesized in GO containing water coagulation bath was also thicker, which in turn influenced the separation performance. For example, the flux of the PS/GO membrane synthesized in GO solution (20 mg/L, PS/GO-20) decreased by 75.1%. However, the PS/GO membranes had better tensile strength (from 2.31 to 2.87 MPa) and tensile modulus (from 237.86 to 258.47 MPa) compared with PS membrane, although the membrane integrity was destroyed to some extent due to the incorporation of GO nanosheets. The results showed that the trace nanomaterials in the water coagulation bath had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the synthesized membranes.

[1]  Xujie Yang,et al.  Graphene oxide doped polyaniline for supercapacitors , 2009 .

[2]  Tae-Hyun Bae,et al.  Effect of TiO2 nanoparticles on fouling mitigation of ultrafiltration membranes for activated sludge filtration , 2005 .

[3]  Cong-jie Gao,et al.  Preparation and properties of functionalized carbon nanotube/PSF blend ultrafiltration membranes , 2009 .

[4]  Zhijun Zhou,et al.  Improving the antifouling property of polysulfone ultrafiltration membrane by incorporation of isocyanate-treated graphene oxide. , 2013, Physical chemistry chemical physics : PCCP.

[5]  S. Stankovich,et al.  Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets , 2006 .

[6]  Masoud Rahimi,et al.  Preparation of a novel antifouling mixed matrix PES membrane by embedding graphene oxide nanoplates , 2014 .

[7]  M. Ioniță,et al.  Improving the thermal and mechanical properties of polysulfone by incorporation of graphene oxide , 2014 .

[8]  C. Macosko,et al.  Graphene/Polymer Nanocomposites , 2010 .

[9]  S. Stankovich,et al.  Preparation and characterization of graphene oxide paper , 2007, Nature.

[10]  Chen Xuesi,et al.  The research of rheology and thermodynamics of organic–inorganic hybrid membrane during the membrane formation , 2008 .

[11]  Bing Zhang,et al.  Preparation and characterization of HPEI-GO/PES ultrafiltration membrane with antifouling and antibacterial properties , 2013 .

[12]  Klaus Kern,et al.  Electronic transport properties of individual chemically reduced graphene oxide sheets. , 2007, Nano letters.

[13]  Bei Wang,et al.  Synthesis and characterisation of hydrophilic and organophilic graphene nanosheets , 2009 .

[14]  Zhong-zhou Liu,et al.  Preparation and characterization of polyacrylonitrile ultrafiltration membranes , 2003 .

[15]  S. Stankovich,et al.  Graphene-based composite materials , 2006, Nature.

[16]  Jixiao Wang,et al.  Performance improvement of polysulfone ultrafiltration membrane by blending with polyaniline nanofibers , 2008 .

[17]  R. Stoltenberg,et al.  Evaluation of solution-processed reduced graphene oxide films as transparent conductors. , 2008, ACS nano.

[18]  Zhiwei Xu,et al.  Improved hydrophilicity, permeability, antifouling and mechanical performance of PVDF composite ultrafiltration membranes tailored by oxidized low-dimensional carbon nanomaterials , 2013 .

[19]  Eric M.V. Hoek,et al.  Preparation and Characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A Review , 2011 .

[20]  Yong Taek Lee,et al.  Preparation and characterization of PVDF/TiO2 organic–inorganic composite membranes for fouling resistance improvement , 2009 .

[21]  R. Ruoff,et al.  Graphene-based ultracapacitors. , 2008, Nano letters.

[22]  Inhwa Jung,et al.  Tunable electrical conductivity of individual graphene oxide sheets reduced at "low" temperatures. , 2008, Nano letters.

[23]  G. Eda,et al.  Graphene-based composite thin films for electronics. , 2009, Nano letters.

[24]  Huanting Wang,et al.  Hydrophilic nanowire modified polymer ultrafiltration membranes with high water flux. , 2014, ACS applied materials & interfaces.

[25]  K. Novoselov,et al.  The mechanics of graphene nanocomposites: A review , 2012 .

[26]  Fenglin Yang,et al.  Effect of graphene oxide concentration on the morphologies and antifouling properties of PVDF ultrafiltration membranes , 2013 .

[27]  Ahmad Fauzi Ismail,et al.  Enhanced hydrophilicity and salt rejection study of graphene oxide-polysulfone mixed matrix membrane , 2013 .

[28]  S. Bose,et al.  Recent advances in graphene based polymer composites , 2010 .

[29]  Yan Wang,et al.  A hybrid material of graphene and poly (3,4-ethyldioxythiophene) with high conductivity, flexibility, and transparency , 2009 .

[30]  Xiaodong Wu,et al.  Graphene oxide--MnO2 nanocomposites for supercapacitors. , 2010, ACS nano.

[31]  G. Eda,et al.  Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material. , 2008, Nature nanotechnology.

[32]  D. Bhattacharyya,et al.  Morphology and transport study of phase inversion polysulfone membranes , 1994 .

[33]  Jixiao Wang,et al.  Comparison study of the effect of PVP and PANI nanofibers additives on membrane formation mechanism , 2011 .

[34]  Feifei Zhang,et al.  Novel GO-blended PVDF ultrafiltration membranes , 2012 .