Nature‐Inspired Lightweight Cellular Co‐Continuous Composites with Architected Periodic Gyroidal Structures

Shell-core cellular composites are a unique class of cellular materials, where the base constituent is made of a composite material such that the best distinctive physical and/or mechanical properties of each phase of the composite are employed. In this work, the authors demonstrate the additive manufacturing of a nature inspired cellular three-dimensional (3D), periodic, co-continuous, and complex composite materials made of a hard-shell and soft-core system. The architecture of these composites is based on the Schoen's single Gyroidal triply periodic minimal surface. Results of mechanical testing show the possibility of having a wide range of mechanical properties by tuning the composition, volume fraction of core, shell thickness, and internal architecture of the cellular composites. Moreover, a change in deformation and failure mechanism is observed when employing a shell-core composite system, as compared to the pure stiff polymeric standalone cellular material. This shell-core configuration and Gyroidal topology allowed for accessing toughness values that are not realized by the constituent materials independently, showing the suitability of this cellular composite for mechanical energy absorption applications.

[1]  Rashid K. Abu Al-Rub,et al.  Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials , 2017 .

[2]  M. Brun,et al.  Gyroidal structures as approximants to nanoporous metal foams: clues from mechanical properties , 2016, Journal of Materials Science.

[3]  D. Stavenga,et al.  Gyroid cuticular structures in butterfly wing scales: biological photonic crystals , 2007, Journal of The Royal Society Interface.

[4]  D. Yoo.  New paradigms in hierarchical porous scaffold design for tissue engineering. , 2013, Materials science & engineering. C, Materials for biological applications.

[5]  W. Yeong,et al.  Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility. , 2017, Materials science & engineering. C, Materials for biological applications.

[6]  Elisabetta A. Matsumoto,et al.  Biomimetic 4D printing. , 2016, Nature materials.

[7]  Li Ma,et al.  Mechanical behavior of the sandwich structures with carbon fiber-reinforced pyramidal lattice truss core , 2010 .

[8]  K. Bertoldi,et al.  Harnessing Deformation to Switch On and Off the Propagation of Sound , 2016, Advanced materials.

[9]  R. Al-rub,et al.  Mechanical properties of periodic interpenetrating phase composites with novel architected microstructures , 2017 .

[10]  M. Boyce,et al.  Co‐Continuous Composite Materials for Stiffness, Strength, and Energy Dissipation , 2011, Advanced materials.

[11]  Jennifer H. Shin,et al.  Three‐Dimensional Network Photonic Crystals via Cyclic Size Reduction/ Infiltration of Sea Urchin Exoskeleton , 2004 .

[12]  M. Buehler,et al.  The mechanics and design of a lightweight three-dimensional graphene assembly , 2017, Science Advances.

[13]  André R. Studart,et al.  Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures , 2017 .

[14]  Richard A. Robb,et al.  Schwarz meets Schwann: Design and fabrication of biomorphic and durataxic tissue engineering scaffolds , 2006, Medical Image Anal..

[15]  S. Torquato,et al.  Fluid permeabilities of triply periodic minimal surfaces. , 2005, Physical review. E, Statistical, nonlinear, and soft matter physics.

[16]  Di Zhang,et al.  Engineering Gyroid-Structured Functional Materials via Templates Discovered in Nature and in the Lab. , 2015, Small.

[17]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[18]  J. S. Kole,et al.  Photonic band gaps in materials with triply periodic surfaces and related tubular structures , 2003 .

[19]  Klaus Mecke,et al.  Minimal surface scaffold designs for tissue engineering. , 2011, Biomaterials.

[20]  Claudio V. Di Leo,et al.  In Situ Lithiation–Delithiation of Mechanically Robust Cu–Si Core–Shell Nanolattices in a Scanning Electron Microscope , 2016 .

[21]  Vikram Deshpande,et al.  Concepts for enhanced energy absorption using hollow micro-lattices , 2010 .

[22]  Rashid K. Abu Al-Rub,et al.  Mechanical properties of 3D printed interpenetrating phase composites with novel architectured 3D solid-sheet reinforcements , 2016 .

[23]  M. Ashby,et al.  FOAM TOPOLOGY BENDING VERSUS STRETCHING DOMINATED ARCHITECTURES , 2001 .

[24]  J. Greer.  Nanoframe Catalysts , 2014, Science.

[25]  Seung Chul Han,et al.  A New Type of Low Density Material: Shellular , 2015, Advanced materials.

[26]  Diab W. Abueidda,et al.  Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites , 2015 .

[27]  Diab W. Abueidda,et al.  Thermo-Electro-Mechanical Properties of Interpenetrating Phase Composites with Periodic Architectured Reinforcements , 2015 .

[28]  Peter Fratzl,et al.  Multilevel architectures in natural materials , 2013 .

[29]  U. Steiner,et al.  Gyroidal mesoporous multifunctional nanocomposites via atomic layer deposition. , 2014, Nanoscale.

[30]  Diab W. Abueidda,et al.  Electrical conductivity of 3D periodic architectured interpenetrating phase composites with carbon nanostructured-epoxy reinforcements , 2015 .

[31]  Dirk Mohr,et al.  Large deformation response of additively-manufactured FCC metamaterials: From octet truss lattices towards continuous shell mesostructures , 2017 .

[32]  Ali Khademhosseini,et al.  3D Bioprinting for Tissue and Organ Fabrication , 2016, Annals of Biomedical Engineering.

[33]  Stefan Hengsbach,et al.  High-strength cellular ceramic composites with 3D microarchitecture , 2014, Proceedings of the National Academy of Sciences.

[34]  Rashid K. Abu Al-Rub,et al.  Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces , 2016 .

[35]  L. Gibson.  The hierarchical structure and mechanics of plant materials , 2012, Journal of The Royal Society Interface.

[36]  Rashid K. Abu Al-Rub,et al.  Finite element predictions of effective multifunctional properties of interpenetrating phase composites with novel triply periodic solid shell architectured reinforcements , 2015 .

[37]  Interpenetrating Phase Composites , 1992 .

[38]  R. Raghavan,et al.  Micromechanics of Amorphous Metal/Polymer Hybrid Structures with 3D Cellular Architectures: Size Effects, Buckling Behavior, and Energy Absorption Capability. , 2017, Small.