Ablation behavior of ZrC–SiC coated C/C–ZrC–SiC composites prepared by precursor infiltration pyrolysis combined with reactive melt infiltration

[1]  Kezhi Li,et al.  Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites , 2013 .

[2]  Anilesh Kumar,et al.  Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites , 2013 .

[3]  H. Hu,et al.  Effects of SiC interphase by chemical vapor deposition on the properties of C/ZrC composite prepared via precursor infiltration and pyrolysis route , 2013 .

[4]  Wei Sun,et al.  Microstructure and ablation behavior of carbon/carbon composites infiltrated with Zr–Ti , 2013 .

[5]  H. Hu,et al.  Mechanism of ablation of 3D C/ZrC–SiC composite under an oxyacetylene flame , 2013 .

[6]  Xiaohong Shi,et al.  Effect of surface ablation products on the ablation resistance of C/C–SiC composites under oxyacetylene torch , 2013 .

[7]  S. Bai,et al.  C/C–ZrC composite prepared by chemical vapor infiltration combined with alloyed reactive melt infiltration , 2012 .

[8]  S. Dong,et al.  Fabrication and comparison of 3D Cf/ZrC–SiC composites using ZrC particles/polycarbosilane and ZrC precursor/polycarbosilane , 2012 .

[9]  Hejun Li,et al.  Effect of reaction melt infiltration temperature on the ablation properties of 2D C/C–SiC–ZrC composites , 2012 .

[10]  S. Dong,et al.  Fabrication and Properties of 3‐D Cf/SiC–ZrC Composites, Using ZrC Precursor and Polycarbosilane , 2012 .

[11]  Song Wang,et al.  Oxidation behavior of oxidation protective coatings for PIP–C/SiC composites at 1500 °C , 2012 .

[12]  Zhihua Yang,et al.  Low temperature sintering of ZrC–SiC composite , 2011 .

[13]  H. Hu,et al.  Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process , 2011 .

[14]  H. Hu,et al.  Ablation behavior and mechanism of 3D C/ZrC composite in oxyacetylene torch environment , 2011 .

[15]  Hejun Li,et al.  Ablation of the carbon/carbon composite nozzle-throats in a small solid rocket motor , 2011 .

[16]  Ljiljana M Kljajević,et al.  Preparation of ZrO2 and ZrO2/SiC powders by carbothermal reduction of ZrSiO4 , 2011 .

[17]  Fei Deng,et al.  The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame , 2011 .

[18]  Lai-fei Cheng,et al.  The Oxidation Behavior of SiC–ZrC–SiC-Coated C/SiC Minicomposites at Ultrahigh Temperatures , 2010 .

[19]  G. Vignoles,et al.  Modelling of carbon–carbon composite ablation in rocket nozzles , 2010 .

[20]  G. Wen,et al.  Formation of ZrC ablation protective coatings on carbon material by tungsten inert gas cladding technique , 2010 .

[21]  Jenn‐Ming Yang,et al.  Microstructural development of a Cf/ZrC composite manufactured by reactive melt infiltration , 2010 .

[22]  Y. Leconte,et al.  Synthesis of nanosized zirconium carbide by laser pyrolysis route , 2009 .

[23]  Song Wang,et al.  Thermodynamic assessment of the C–Si–Zr system , 2009 .

[24]  Yaogang Li,et al.  Effect of Si and Zr additions on oxidation resistance of hot-pressed ZrB2–SiC composites with polycarbosilane as a precursor at 1500 °C , 2009 .

[25]  S. Dong,et al.  Fabrication and Properties of C f /SiC-ZrC Composites , 2008 .

[26]  Jingli Shi,et al.  The effect of Zirconium addition on the microstructure and properties of chopped carbon fiber/carbon composites , 2007 .

[27]  F. Monteverde.  Progress in the fabrication of ultra-high-temperature ceramics: “in situ” synthesis, microstructure and properties of a reactive hot-pressed HfB2–SiC composite , 2005 .

[28]  Huang Jianfeng,et al.  Mullite-Al2O3-SiC oxidation protective coating for carbon/carbon composites , 2003 .

[29]  G. Blount,et al.  Carbon-carbon composites: a summary of recent developments and applications , 1997 .

[30]  J. Sheehan.  Oxidation protection for carbon fiber composites , 1989 .

[31]  E. Fitzer.  The future of carbon-carbon composites , 1987 .

[32]  B. Kellett,et al.  Stresses Induced by Differential Sintering in Powder Compacts , 1984 .