Online model-based control of an emulsion terpolymerisation process

A multivariable constrained model predictive control was formulated and implemented to control online an emulsion terpolymerisation process. A generic multilayer control architecture for real-time implementation of optimal control policies for particulate processes was also developed. The methodology was implemented within a multi-tiered software environment for real-time implementation of model-based control strategies. A full mechanistic dynamic model for emulsion terpolymerisation, developed in our previous work, is used as a real-time soft-sensor and incorporated within the MPC strategy. The simultaneous control of key polymer properties such as the particle size distribution (PSD), average molecular weight (Mn) and terpolymer composition were investigated using case studies involving manipulation of flow rates of monomers (styrene, MMA, MA), surfactant and initiator, and the reactor temperature. Although some offsets were observed with a degree of model mismatch, the experimental results agreed well with predictions.

[1]  J. Romagnoli,et al.  Online inferential product attribute estimation for optimal operation of emulsion terpolymerisation: Application to styrene/MMA/MA , 2007 .

[2]  F. B. Freire,et al.  Temperature oscillation calorimetry by means of a Kalman‐like observer: the joint estimation of Qr and UA in a stirred tank polymerization reactor , 2004 .

[3]  C. Kiparissides.  Polymerization reactor modeling: A review of recent developments and future directions , 1996 .

[4]  Gülay Özkan,et al.  Nonlinear control of polymerization reactor , 2001 .

[5]  C. Pichot,et al.  New Design for Producing Constant-Composition Copolymers in Emulsion Polymerization: Comparison with Other Processes , 1981 .

[6]  J. Macgregor,et al.  State estimation for continuous emulsion polymerization , 1991 .

[7]  A. Penlidis.  Polymer reaction engineering: From reaction kinetics to polymer reactor control , 1994 .

[8]  E.B. Martin,et al.  Prediction of polymer quality in batch polymerisation reactors using neural networks , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[9]  J. Macgregor,et al.  Control of Emulsion Polymerization Reactors , 1983 .

[10]  P. H. Araújo,et al.  In Situ Near-Infrared Spectroscopy for Simultaneous Monitoring of Multiple Process Variables in Emulsion Copolymerization , 2004 .

[11]  T. McKenna,et al.  Polymer composition control in emulsion co- and terpolymerizations , 2002 .

[12]  D. Bassett,et al.  Nonuniform Emulsion Polymers: Process Description and Polymer Properties , 1981 .

[13]  Andrew Klein,et al.  An experimental study of adaptive Kalman filtering in emulsion copolymerization , 1991 .

[14]  J. Leiza,et al.  Molecular‐weight distribution control in emulsion polymerization , 1998 .

[15]  K. S. Knaebel,et al.  Optimization of semibatch polymerization reactions , 1989 .

[16]  J. Leiza,et al.  Model-Based Control of Emulsion Terpolymers Based on Calorimetric Measurements , 2000 .

[17]  Hyun-Ku Rhee,et al.  Application of adaptive model-predictive control to a batch MMA polymerization reactor , 1998 .

[18]  Agustín Urretabizkaia,et al.  On‐line terpolymer composition control in semicontinuous emulsion polymerization , 1994 .

[19]  C. Georgakis,et al.  Control of a solution copolymerization reactor using multi-model predictive control , 2003 .

[20]  J. Leiza,et al.  Feedback Control of Emulsion Polymerization Reactors , 1997 .

[21]  Claudio Scali,et al.  Control of the quality of polymer products in continuous reactors: comparison of performance of state estimators with and without updating of parameters , 1997 .

[22]  J. Romagnoli,et al.  On-line multi-variable predictive control of molar mass and particle size distributions in free-radical emulsion copolymerization , 2005 .

[23]  C. Georgakis,et al.  On‐line monitoring, modeling, and model validation of semibatch emulsion polymerization in an automated reactor control facility , 1998 .

[24]  J. Leiza,et al.  Simultaneous control of copolymer composition and MWD in emulsion copolymerization , 2001 .

[25]  G. E. Eliçabe,et al.  Estimation and control in polymerization reactors. A review , 1988 .

[26]  J. Romagnoli,et al.  Online control of molar mass and particle‐size distributions in emulsion polymerization , 2006 .

[27]  J. Leiza,et al.  On-line calorimetric control of emulsion polymerization reactors , 1996 .

[28]  P. Canu,et al.  Composition control in emulsion copolymerization. I. Optimal monomer feed policies , 1994 .

[29]  Manfred Morari,et al.  Optimal operation of integrated processing systems. Part I: Open‐loop on‐line optimizing control , 1981 .

[30]  Jay H. Lee,et al.  Recursive data-based prediction and control of product quality for a PMMA batch process , 2003 .

[31]  Myung-June Park,et al.  Property evaluation and control in a semibatch MMA/MA solution copolymerization reactor , 2003 .

[32]  V. Liotta,et al.  Real-time estimation and control of particle size in semi-batch emulsion polymerization , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[33]  J. Leiza,et al.  Maximizing production and polymer quality (MWD and composition) in emulsion polymerization reactors with limited capacity of heat removal , 2003 .

[34]  C. Georgakis,et al.  Control of emulsion polymerization reactors , 1994 .

[35]  Ali Abbas,et al.  DCS implementation of optimal operational policies: a crystallisation case study , 2006, Int. J. Comput. Appl. Technol..

[36]  J. Leiza,et al.  On‐line control of a semibatch emulsion polymerization reactor based on calorimetry , 1997 .

[37]  T. Crowley,et al.  Discrete Optimal Control of Molecular Weight Distribution in a Batch Free Radical Polymerization Process , 1997 .

[38]  P. Canu,et al.  Composition control in emulsion copolymerization. II. Application to binary and ternary systems , 1994 .

[39]  J. Asua,et al.  Nonlinear control for maximum production rate of latexes of well-defined polymer composition , 1997 .

[40]  T. Crowley,et al.  Experimental studies on optimal molecular weight distribution control in a batch-free radical polymerization process , 1998 .

[41]  Julian Morris,et al.  Intelligent manufacturing of polymers , 1996 .

[42]  T. McKenna,et al.  ON-LINE MONITORING OF EMULSION TERPOLYMERIZATION PROCESSES , 2001 .