Test structures and their application in structural testing of digital RSFQ circuits

As the niobium (Nb) LTS RSFQ processes advance being the technology for future ultrahigh-speed systems in the digital domain, the quality of the process should be maintained high for a successful realization of these complex circuits. A defect-oriented testing (DOT) approach is essential so as to increase the yield of the process. Little information is available in this area and the recent increase of Josephson junctions to around 90,000 per chip requires a detailed study on this topic. In this paper we present how DOT can be applied to RSFQ circuits. As a result of a study conducted on an RSFQ process, a list of possible defects has been identified and described in detail. We have also developed test-structures for detection of the top-ranking defects, which will be used for the probability distribution of faults in the process. One of the highly probable defects will be used to elaborate the DOT technique for fault modeling and simulation purposes.

[1]  Dmitry Zinoviev,et al.  FLUX chip: design of a 20-GHz 16-bit ultrapipelined RSFQ processor prototype based on 1.75-/spl mu/m LTS technology , 2001 .

[2]  A. Fujimaki,et al.  Characteristics of high critical current density Josephson junctions with Nb/AlO/sub x//Nb trilayers , 1995, IEEE Transactions on Applied Superconductivity.

[3]  Jaap Flokstra,et al.  Second generation dc-SQUID sensors: relaxation oscillation SQUIDS (ROS) with frequency readout and double relaxation oscillation SQUIDS (DROS) with voltage readout , 1994, Photonics West - Lasers and Applications in Science and Engineering.

[4]  Hans G. Kerkhoff,et al.  Defect-Oriented testing of Josephson Logic Circuits and Systems , 2000 .

[5]  M. Leung,et al.  Manufacturability of superconductor electronics for a petaflops-scale computer , 1999, IEEE Transactions on Applied Superconductivity.

[6]  Andrzej Jakubowski,et al.  Diagnostic Measurements in Lsi/VLSI Integrated Circuits Production , 1991 .

[7]  V.K. Semenov,et al.  Extraction of impacts of fabrication spread and thermal noise on operation of superconducting digital circuits , 1999, IEEE Transactions on Applied Superconductivity.

[8]  Dhiraj K. Pradhan,et al.  Integrated Circuit Manufacturability: The Art of Process and Design Integration , 1998 .

[9]  James A. Misewich,et al.  Experimental demonstration of superconducting bandpass delta-sigma modulator , 2003 .

[10]  Hans G. Kerkhoff,et al.  The Detection of Defects in a Niobium Tri-layer Process , 2002 .

[11]  R. Monaco,et al.  Fabrication and properties of multiple vertically stacked Josephson tunnel junctions , 1996, IEEE Transactions on Applied Superconductivity.