Equivalent circuit modeling of a piezo-patch energy harvester on a thin plate with AC–DC conversion

As an alternative to beam-like structures, piezoelectric patch-based energy harvesters attached to thin plates can be readily integrated to plate-like structures in automotive, marine, and aerospace applications, in order to directly exploit structural vibration modes of the host system without mass loading and volumetric occupancy of cantilever attachments. In this paper, a multi-mode equivalent circuit model of a piezo-patch energy harvester integrated to a thin plate is developed and coupled with a standard AC–DC conversion circuit. Equivalent circuit parameters are obtained in two different ways: (1) from the modal analysis solution of a distributed-parameter analytical model and (2) from the finite-element numerical model of the harvester by accounting for two-way coupling. After the analytical modeling effort, multi-mode equivalent circuit representation of the harvester is obtained via electronic circuit simulation software SPICE. Using the SPICE software, electromechanical response of the piezoelectric energy harvester connected to linear and nonlinear circuit elements are computed. Simulation results are validated for the standard AC–AC and AC–DC configurations. For the AC input–AC output problem, voltage frequency response functions are calculated for various resistive loads, and they show excellent agreement with modal analysis-based analytical closed-form solution and with the finite-element model. For the standard ideal AC input–DC output case, a full-wave rectifier and a smoothing capacitor are added to the harvester circuit for conversion of the AC voltage to a stable DC voltage, which is also validated against an existing solution by treating the single-mode plate dynamics as a single-degree-of-freedom system.

[1]  Salvatore Graziani,et al.  Characterization of the harvesting capabilities of an ionic polymer metal composite device , 2008 .

[2]  Daniel J. Inman,et al.  Piezoaeroelastic Modeling and Analysis of a Generator Wing with Continuous and Segmented Electrodes , 2010 .

[3]  Yuantai Hu,et al.  A piezoelectric power harvester with adjustable frequency through axial preloads , 2007 .

[4]  Saibal Roy,et al.  A micro electromagnetic generator for vibration energy harvesting , 2007 .

[5]  D. Guyomar,et al.  Toward energy harvesting using active materials and conversion improvement by nonlinear processing , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  P. Wright,et al.  Resonance tuning of piezoelectric vibration energy scavenging generators using compressive axial preload , 2006 .

[7]  Yiming Liu,et al.  Investigation of electrostrictive polymers for energy harvesting , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  Ryan L. Harne,et al.  Development and testing of a dynamic absorber with corrugated piezoelectric spring for vibration control and energy harvesting applications , 2013 .

[9]  Daniel J. Inman,et al.  Issues in mathematical modeling of piezoelectric energy harvesters , 2008 .

[10]  Y. Naruse,et al.  Electrostatic micro power generation from low-frequency vibration such as human motion , 2009 .

[11]  Daniel J. Inman,et al.  An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations , 2009 .

[12]  S. Beeby,et al.  Energy harvesting vibration sources for microsystems applications , 2006 .

[13]  Yiannos Manoli,et al.  A closed-loop wide-range tunable mechanical resonator for energy harvesting systems , 2009 .

[14]  Kurt Maute,et al.  Design of Piezoelectric Energy Harvesting Systems: A Topology Optimization Approach Based on Multilayer Plates and Shells , 2009 .

[15]  Deniz Dogruer,et al.  Ionic polymer metal composites as energy harvesters , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  N. Elvin,et al.  A General Equivalent Circuit Model for Piezoelectric Generators , 2009 .

[17]  Alper Erturk,et al.  Piezoelectric energy harvesting for civil infrastructure system applications: Moving loads and surface strain fluctuations , 2011 .

[18]  Yi-Chung Shu,et al.  Analysis of power output for piezoelectric energy harvesting systems , 2006 .

[19]  Yaowen Yang,et al.  Equivalent Circuit Modeling of Piezoelectric Energy Harvesters , 2009 .

[20]  Amr A. Adly,et al.  Experimental tests of a magnetostrictive energy harvesting device toward its modeling , 2010 .

[21]  D. Inman,et al.  A piezomagnetoelastic structure for broadband vibration energy harvesting , 2009 .

[22]  Daniel J. Inman,et al.  Estimation of Electric Charge Output for Piezoelectric Energy Harvesting , 2004 .

[23]  Chengkuo Lee,et al.  Electromagnetic energy harvesting from vibrations of multiple frequencies , 2009 .

[24]  Kai Zhang,et al.  A FREQUENCY ADJUSTABLE VIBRATION ENERGY HARVESTER , 2008 .

[25]  Wen-Jong Wu,et al.  An improved analysis of the SSHI interface in piezoelectric energy harvesting , 2007 .

[26]  Alper Erturk,et al.  Analytical modeling and experimental validation of a structurally integrated piezoelectric energy harvester on a thin plate , 2014 .

[27]  Daniel J. Inman,et al.  Modeling and Analysis of Piezoelectric Energy Harvesting From Aeroelastic Vibrations Using the Doublet-Lattice Method , 2011 .

[28]  S. Shahruz.  Design of Mechanical Band-Pass Filters for Energy Scavenging: Multi-Degree-of-Freedom Models , 2008 .

[29]  Daniel J. Inman,et al.  An electromechanical finite element model for piezoelectric energy harvester plates , 2009 .

[30]  Henry A. Sodano,et al.  A review of power harvesting using piezoelectric materials (2003–2006) , 2007 .

[31]  M. G. Prasad,et al.  A vibration energy harvesting device with bidirectional resonance frequency tunability , 2008 .

[32]  D. Guyomar,et al.  Piezoelectric Energy Harvesting using a Synchronized Switch Technique , 2006 .

[33]  Erick O. Torres,et al.  A 0.7-$\mu$ m BiCMOS Electrostatic Energy-Harvesting System IC , 2010, IEEE Journal of Solid-State Circuits.

[34]  Y. Shu,et al.  Analysis of power output for piezoelectric energy harvesting systems , 2006 .

[35]  Alex Elvin,et al.  A Coupled Finite Element—Circuit Simulation Model for Analyzing Piezoelectric Energy Generators , 2009 .

[36]  Alper Erturk,et al.  Assumed-modes modeling of piezoelectric energy harvesters: Euler-Bernoulli, Rayleigh, and Timoshenko models with axial deformations , 2012 .

[37]  Lei Wang,et al.  Vibration energy harvesting by magnetostrictive material , 2008 .

[38]  Ann Marie Sastry,et al.  Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems , 2008 .

[39]  Ryan L. Harne,et al.  Concurrent attenuation of, and energy harvesting from, surface vibrations: experimental verification and model validation , 2012 .

[40]  Daniel J. Inman,et al.  A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters , 2008 .

[41]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless remote power supply , 2002 .