Two-Input Two-Output Control of Blended Fuel HCCI Engines

[1]  A. Stefanopoulou,et al.  Sensitivity analysis of combustion timing and duration of homogeneous charge compression ignition (HCCI) engines , 2006, 2006 American Control Conference.

[2]  Mahdi Shahbakhti,et al.  Dynamic Modeling of HCCI Combustion Timing in Transient Fueling Operation , 2009 .

[3]  Hongming Xu,et al.  Research on expansion of operating windows of controlled homogeneous auto-ignition engines , 2007 .

[4]  Mehran Bidarvatan,et al.  Model-Based Control of Combustion Phasing in an HCCI Engine , 2012 .

[5]  Rolf Johansson,et al.  Hybrid modelling of homogeneous charge compression ignition (HCCI) engine dynamics—a survey , 2007, Int. J. Control.

[6]  M. Shahbakhti,et al.  Experimental study of exhaust temperature variation in a homogeneous charge compression ignition engine , 2010 .

[7]  M. Shahbakhti,et al.  Characterizing the cyclic variability of ignition timing in a homogeneous charge compression ignition engine fuelled with n-heptane/iso-octane blend fuels , 2008 .

[8]  Bengt Johansson,et al.  Transient Control of a Multi Cylinder HCCI Engine During a Drive Cycle , 2005 .

[9]  Wu-Chung Su,et al.  An O(T2) boundary layer in sliding mode for sampled-data systems , 2000, IEEE Trans. Autom. Control..

[10]  Mahdi Shahbakhti,et al.  Sensitivity analysis & modeling of HCCI auto-ignition timing , 2007 .

[11]  Mrdjan Jankovic,et al.  Nonlinear Observer-Based Control of Load Transitions in Homogeneous Charge Compression Ignition Engines , 2007, IEEE Transactions on Control Systems Technology.

[12]  Chia-Jui Chiang,et al.  Discrete-time cross-term forwarding design of robust controllers for HCCI engines , 2010, Proceedings of the 2010 American Control Conference.

[13]  J. Gerdes,et al.  Physics-Based Modeling and Control of Residual-Affected HCCI Engines , 2009 .

[14]  G. Kalghatgi,et al.  Combustion Limits and Efficiency in a Homogeneous Charge Compression Ignition Engine , 2006 .

[15]  Gene F. Franklin,et al.  Digital control of dynamic systems , 1980 .

[16]  Mahdi Shahbakhti,et al.  Physics Based Control Oriented Model for HCCI Combustion Timing , 2010 .

[17]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[18]  G.M. Shaver,et al.  Physics-based closed-loop control of phasing, peak pressure and work output in HCCI engines utilizing variable valve actuation , 2004, Proceedings of the 2004 American Control Conference.

[19]  Adrian Audet,et al.  Actuator Comparison for Closed Loop Control of HCCIC Combustion Timing , 2009 .

[20]  J. Christian Gerdes,et al.  Model predictive control of HCCI using variable valve actuation and fuel injection , 2012 .

[21]  Erik Hellström,et al.  Model-Based Feedback Control for an Automated Transfer Out of SI Operation During SI to HCCI Transitions in Gasoline Engines , 2012 .

[22]  Nilabh Srivastava,et al.  Optimal Peak Pressure and Exhaust Temperature Tracking Control for a Two-Zone HCCI Engine Model with Mean Burn Duration , 2009 .

[23]  Bengt Johansson,et al.  Closed-Loop Control of an HCCI Engine , 2001 .

[24]  Rolf Johansson,et al.  Variable Valve Actuation for Timing Control of a Homogeneous Charge Compression Ignition Engine , 2005 .

[25]  J. Christian Gerdes,et al.  Model-Based Control of HCCI Engines Using Exhaust Recompression , 2010, IEEE Transactions on Control Systems Technology.

[26]  Mahdi Shahbakhti,et al.  Predicting Start of Combustion Using a Modified Knock Integral Method for an HCCI Engine , 2006 .

[27]  Jihong Wang,et al.  Real-time control oriented HCCI engine cycle-to-cycle dynamic modelling , 2011, Int. J. Autom. Comput..

[28]  J. Christian Gerdes,et al.  Modeling and Control of an Exhaust Recompression HCCI Engine Using Split Injection , 2012 .

[29]  Rolf Johansson,et al.  Physics-Based Model Predictive Control of HCCI Combustion Phasing Using Fast Thermal Management and VVA , 2012, IEEE Transactions on Control Systems Technology.

[30]  Rolf Johansson,et al.  Cycle-to-Cycle Control of a Dual-Fuel HCCI Engine , 2004 .

[31]  Huang Zhen,et al.  Heat Release Analysis on Combustion and Parametric Study on Emissions of HCCI Engines Fueled with 2-Propanol/n-Heptane Blend Fuels , 2006 .

[32]  Gou-Jen Wang,et al.  Discrete sliding mode controller design based on the LQR suboptimal approach with application on ac servo motor , 2006 .

[33]  Mahdi Shahbakhti,et al.  Modeling Ranges of Cyclic Variability for HCCI Ignition Timing Control , 2011 .