Effects of low-temperature curing on physical behavior of cold-curing epoxy adhesives in bridge construction

The effect of low-temperature curing on the physical characteristics of a commercial cold-curing epoxy adhesive was experimentally and analytically investigated with a view to a potential application in bridge construction in winter. Curing at low temperatures of 5-10 degrees C took place but the curing process was significantly decelerated due to material vitrification and the associated diffusion-controlled reaction. Existing dynamic and isothermal curing models developed for hot-curing adhesives proved to be applicable to simulate the curing behavior. However, a heating rate-dependent pre-exponential factor and diffusion control had to be taken into account. The relationship between the glass transition temperature and the curing degree could also be described by models developed for hot-curing adhesives. However, at low temperatures, the relationship was curing temperature-dependent, something which had to be taken into account in the modeling in order to provide accurate simulation. (C) 2011 Elsevier Ltd. All rights reserved.

[1]  Michael R. Kessler,et al.  Cure kinetics of the ring‐opening metathesis polymerization of dicyclopentadiene , 2002 .

[2]  S. Pang,et al.  Thermal analysis of curing process of epoxy prepreg , 2001 .

[3]  F. E. Karasz,et al.  A Classical Thermodynamic Discussion of the Effect of Composition on Glass-Transition Temperatures , 1978 .

[4]  A. Dibenedetto,et al.  Prediction of the glass transition temperature of polymers: A model based on the principle of corresponding states , 1987 .

[5]  M. E. Ryan,et al.  Kinetics of epoxy cure: a rapid technique for kinetic parameter estimation , 1979 .

[6]  C. Macosko,et al.  Glass Transition Temperature as a Function of Conversion in Thermosetting Polymers , 1991 .

[7]  F. Boey,et al.  Experimental modeling of the cure kinetics of an epoxy-hexaanhydro-4-methylphthalicanhydride (MHHPA) system , 2000 .

[8]  G. Mays,et al.  Adhesives in Civil Engineering , 1992 .

[9]  On the behaviour of hybrid aluminium/CFRP ☐ beams at low temperatures , 1997 .

[10]  J. Pascault,et al.  Relationships between glass transition temperature and conversion , 1990 .

[11]  R. Boukhili,et al.  Relationship between isothermal and dynamic cure of thermosets via the isoconversion representation , 2000 .

[12]  R. Messler.  Joining Composite Materials and Structures: Some Thought-Provoking Possibilities , 2004 .

[13]  S. W. Kim,et al.  Kinetic studies of an epoxy cure reaction by isothermal DSC analysis , 2000 .

[14]  J. K. Gillham,et al.  The glass transition temperature (Tg) as an index of chemical conversion for a high‐Tg amine/epoxy system: Chemical and diffusion‐controlled reaction kinetics , 1990 .

[15]  Oral Buyukozturk,et al.  SHEAR BEHAVIOR OF JOINTS IN PRECAST CONCRETE SEGMENTAL BRIDGES , 1990 .

[16]  Bryan Ellis,et al.  Chemistry and technology of epoxy resins , 1992 .

[17]  Pierre G. Lafleur,et al.  Kinetic studies of thermoset cure reactions: A review , 1997 .

[18]  H. E. Kissinger.  Reaction Kinetics in Differential Thermal Analysis , 1957 .

[19]  F. Boey,et al.  Glass‐transition temperature–conversion relationship for an epoxy–hexahydro‐4‐methylphthalic anhydride system , 2000 .

[20]  U. Meier.  STRENGTHENING OF STRUCTURES USING CARBON FIBRE/EPOXY COMPOSITES , 1995 .

[21]  S. Pang,et al.  Dynamic modeling of curing process of epoxy prepreg , 2002 .

[22]  Gary W. Poehlein,et al.  A kinetic model for curing reactions of epoxides with amines , 1987 .

[23]  T. Ozawa.  A New Method of Analyzing Thermogravimetric Data , 1965 .

[24]  J. K. Gillham,et al.  A relationship between the glass transition temperature (Tg) and fractional conversion for thermosetting systems , 1997 .