Application of Fiber Bragg Gratings to Wearable Garments

This paper presents a photonic system based on Fiber Bragg Gratings (FBGs) for application to wearable garments. The objective is spanning the FBGs over the whole area of the garments for acting as sensing elements. The FBGs are embedded on a polychloroethanediyl (polyvinyl chloride, commonly abbreviated as PVC) carrier in order to increase their sensitivity to strains and for improving the simultaneous acquisition of respiratory and cardiac frequencies with only one FBG sensor. The global structure comprising FBGs and carrier allow high strain cycles and at the same time present linear behavior with the temperature, 17 pm · °C-1. The measurements show a stable structure for temperatures up to 100°C. This brings excellent perspectives for measuring the temperature with high accuracy and range. A set of tests were done by subjecting the FBG/carrier structure (with FBG stretched and no curves) to strains up to 1.2 mm, and it was also observed a linear behaviour: e.g., displacements of 0.8 pm · με-1. Behind its sensing enhancement operation, the carrier makes easy to mount the sensing structures.

[1]  T. Erdogan.  Fiber grating spectra , 1997 .

[2]  Y. Saeki,et al.  Technical progresses for PVC production , 2002 .

[3]  Tong Sun,et al.  Polymer-coated fiber Bragg grating for relative humidity sensing , 2005, IEEE Sensors Journal.

[4]  K Y Lee,et al.  A Fiber Bragg Grating Sensor System for Train Axle Counting , 2010, IEEE Sensors Journal.

[5]  Chi Chiu Chan,et al.  Temperature-insensitive FBG tilt sensor with a large measurement range , 2009, 2009 Asia Communications and Photonics conference and Exhibition (ACP).

[6]  F. Pirotte,et al.  Optical Fiber Sensors Embedded Into Medical Textiles for Healthcare Monitoring , 2008, IEEE Sensors Journal.

[7]  F. Bates,et al.  High Strength Polyolefin Block Copolymers , 2004 .

[8]  George B. Kauffman,et al.  Polyurethanes: A class of modern versatile materials , 1992 .

[9]  F. Narbonneau,et al.  OFSETH: Smart medical textile for continuous monitoring of respiratory motions under magnetic resonance imaging , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[10]  D. Kinet,et al.  Optical fibre sensors embedded into technical textile for a continuous monitoring of patients under Magnetic Resonance Imaging , 2008, 2008 30th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[11]  Ricardo Losada,et al.  Designing IIR filters with a given 3-dB point [DSP Tips&Tricks] , 2005 .

[12]  Pawel Niewczas,et al.  An Optical Fibre System Design Enabling Simultaneous Point Measurement of Magnetic Field Strength and Temperature Using Low-Birefringence FBGs , 2010 .

[13]  J.-G. Liu,et al.  Dynamic strain measurement with a fibre Bragg grating sensor system , 2002 .

[14]  R. Marculescu,et al.  Ready to ware , 2003, IEEE Spectrum.

[15]  Xiaojing Yuan,et al.  Monitoring of the heartbeat sounds using an optical fiber Bragg grating sensor , 2005, IEEE Sensors, 2005..

[16]  S. Parivallal,et al.  Investigation on packages of fiber Bragg grating for use as embeddable strain sensor in concrete structure , 2010 .

[17]  José Higino Correia,et al.  PVC formulation study for the manufacturing of a skin smart structure based in optical fiber elements , 2012 .

[18]  Tong Sun,et al.  In Situ Cross-Calibration of In-Fiber Bragg Grating and Electrical Resistance Strain Gauges for Structural Monitoring Using an Extensometer , 2009, IEEE Sensors Journal.

[19]  R. Losada,et al.  Designing IIR filters with a given 3-dB point , 2005, IEEE Signal Process. Mag..

[20]  J. Mason,et al.  Evaluation of Cardiac Monitoring Using Fiber Optic Plethysmography , 2005, Annals of Biomedical Engineering.

[21]  Hypolito José Kalinowski,et al.  A fibre optic Bragg grating strain sensor for monitoring ventilatory movements , 2001 .

[22]  Zhimin Chen,et al.  Stabilisation of an optical fiber Michelson interferometer measurement system using a simple feedback circuit , 2009 .