Experimental Study on Installation of Hybrid Bucket Foundations for Offshore Wind Turbines in Silty Clay

Two large-scale sinking tests of the hybrid bucket foundation were revealed in typical saturated silty clay of China offshore wind farms. The experimental foundation has an outer diameter of 3.5 m and a clear wall height of 0.9 m with seven rooms divided inside the HBF by steel bulkheads, which are arranged in a honeycomb structure. The different pressure inside the seven compartments can control the levelness of the HBF during suction installation. During the sinking process of the bucket foundation, real-time monitoring was conducted of the produced underpressure, the soil pressure and the pore pressure inside and outside the bucket wall, which reflected the sinking state of the bucket foundation. Test results show that suction can be combined with air pumping to reasonably control the sinking speed of the bucket foundation and the levelness at each stage. In the cases where the soil surface at the sinking location for the bucket foundation was relatively horizontal, the levelness could be ensured to meet the standard and design requirements after the sinking of the bucket foundation was completed.

[1]  Puyang Zhang,et al.  Hydrodynamic motion of a large prestressed concrete bucket foundation for offshore wind turbines , 2013 .

[2]  Puyang Zhang,et al.  Seismic response of large-scale prestressed concrete bucket foundation for offshore wind turbines , 2014 .

[3]  Puyang Zhang,et al.  Influential factors of bucket foundation for offshore wind turbine , 2015 .

[4]  Hongyan Ding,et al.  Behavior of Monopile Foundations for Offshore Wind Farms in Sand , 2016 .

[5]  Jijian Lian,et al.  Laboratory tests on soil–skirt interaction and penetration resistance of suction caissons during installation in sand , 2014 .

[6]  Kim André Larsen,et al.  Calibration of Failure Criteria for Bucket Foundations on Drained Sand under General Loading , 2014 .

[7]  Bin Zhu,et al.  Long-Term Lateral Cyclic Response of Suction Caisson Foundations in Sand , 2013 .

[8]  Liu Run,et al.  Vertical bearing behaviour of the composite bucket shallow foundation of offshore wind turbines , 2015 .

[9]  Xiangwu Zeng,et al.  Seismic centrifuge modelling of offshore wind turbine with tripod foundation , 2013, 2013 IEEE Energytech.

[10]  ZhuBin,et al.  Installation and lateral loading tests of suction caissons in silt , 2011 .

[11]  Puyang Zhang,et al.  One-step-installation of offshore wind turbine on large-scale bucket-top-bearing bucket foundation , 2013 .

[12]  Hedi Dendani.  Suction Anchors: Some critical aspects for their design and installation in clayey soils , 2003 .

[13]  Byron W. Byrne,et al.  Suction Caisson Foundations for Offshore Wind Turbines and Anemometer Masts , 2000 .

[14]  Xiangwu Zeng,et al.  Centrifuge modeling of offshore wind foundations under earthquake loading , 2015 .

[15]  M. Randolph,et al.  CPT-Based Method for the Installation of Suction Caissons in Sand , 2009 .

[16]  Barry Lehane,et al.  Extraction of suction caissons in sand , 2014 .

[17]  Lingyun Feng,et al.  Capacity of modified suction caissons in marine sand under static horizontal loading , 2015 .

[18]  Tove Feld.  Suction Buckets: a new innovation foundation concept, applied to offshore wind turbines , 2001 .

[19]  H. Dendani,et al.  Girassol: Design Analysis and Installation of the Suction Anchors , 2002 .

[20]  Lars Vabbersgaard Andersen,et al.  Numerical Buckling Analysis of Large Suction Caissons for Wind Turbines on Deep Water , 2013 .

[21]  Guy T. Houlsby,et al.  Field trials of suction caissons in clay for offshore wind turbine foundations , 2005 .

[22]  Haijun Wang,et al.  Bearing capacity and technical advantages of composite bucket foundation of offshore wind turbines , 2011 .

[23]  Martin Achmus,et al.  On the behavior of suction buckets in sand under tensile loads , 2014 .

[24]  Byron W. Byrne,et al.  Design procedures for installation of suction caissons in clay and other materials , 2005 .

[25]  Mark Randolph,et al.  Installation of suction caissons in sand with silt layers , 2007 .

[26]  Xiangwu Zeng,et al.  Seismic Behavior of Offshore Wind Turbine with Suction Caisson Foundation , 2014 .

[27]  Marc Senders,et al.  Suction caissons in sand as tripod foundations for offshore wind turbines , 2009 .

[28]  Guy T. Houlsby,et al.  A comparison of field and laboratory tests of caisson foundations in sand and clay , 2006 .

[29]  Puyang Zhang,et al.  Design of large-scale prestressing bucket foundation for offshore wind turbines , 2012 .

[30]  Yanqing Han,et al.  Field experiments on wet tows of an integrated transportation and installation vessel with two bucket foundations for offshore wind turbines , 2015 .

[31]  Puyang Zhang,et al.  Motion analysis on integrated transportation technique for offshore wind turbines , 2013 .

[32]  Puyang Zhang,et al.  Installation and Removal Records of Field Trials for Two Mooring Dolphin Platforms with Three Suction Caissons , 2013 .