Evolution of Mg–Zn second phases during ECAP at different processing temperatures and its impact on mechanical properties of Zn-1.6Mg (wt.%) alloys

[1]  Hua-nan Liu,et al.  Recent Advances in LPSO-Containing Wrought Magnesium Alloys: Relationships Between Processing, Microstructure, and Mechanical Properties , 2019, JOM.

[2]  Hua-nan Liu,et al.  Effect of ECAP process on as-cast and as-homogenized Mg-Al-Ca-Mn alloys with different Mg2Ca morphologies , 2019, Journal of Alloys and Compounds.

[3]  Hua-nan Liu,et al.  Preparation of a single-phase Mg–6Zn alloy via ECAP-stimulated solution treatment , 2019, Journal of Magnesium and Alloys.

[4]  C. Esling,et al.  Growth behavior of Zn-rich phase in Zn-Mg alloy under a high magnetic field , 2019, Materials Characterization.

[5]  J. Kawałko,et al.  Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP , 2019, Materials Science and Engineering: A.

[6]  Yufeng Zheng,et al.  Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design , 2019, Advanced Functional Materials.

[7]  Yangqiu Wang,et al.  Ambient-temperature mechanical properties of isochronally aged 1420-Sc-Zr aluminum alloy , 2019, Materials Science and Engineering: A.

[8]  Zhang-Zhi Shi,et al.  (Fe, Mn)Zn13 phase and its core-shell structure in novel biodegradable Zn-Mn-Fe alloys , 2019, Materials & Design.

[9]  F. Witte,et al.  Biodegradable Metals , 2018, Biomaterials Science.

[10]  C. Cui,et al.  Fabrication and properties of porous Zn-Ag alloy scaffolds as biodegradable materials , 2018, Materials Chemistry and Physics.

[11]  Yang Cao,et al.  Structural evolutions of metallic materials processed by severe plastic deformation , 2018, Materials Science and Engineering: R: Reports.

[12]  Yuping Ren,et al.  Indirectly extruded biodegradable Zn-0.05wt%Mg alloy with improved strength and ductility: In vitro and in vivo studies , 2018, Journal of Materials Science & Technology.

[13]  J. Kawałko,et al.  Effect of zirconium microaddition on the microstructure and mechanical properties of Zn-Zr alloys , 2018, Materials Characterization.

[14]  J. Kawałko,et al.  Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing , 2018 .

[15]  J. Drelich,et al.  Zinc-based alloys for degradable vascular stent applications. , 2018, Acta biomaterialia.

[16]  R. Kainuma,et al.  Experimental determination of phase diagram in the Zn-Fe binary system , 2018 .

[17]  J. Drelich,et al.  Novel high-strength, low-alloys Zn-Mg (<0.1wt% Mg) and their arterial biodegradation. , 2018, Materials science & engineering. C, Materials for biological applications.

[18]  M. Khakbiz,et al.  Characterization of nanostructured biodegradable Zn-Mn alloy synthesized by mechanical alloying , 2018 .

[19]  N. Cheung,et al.  Tailoring microstructure, tensile properties and fracture process via transient directional solidification of Zn-Sn alloys , 2018 .

[20]  Ł. Rogal,et al.  A new approach to plastic deformation of biodegradable zinc alloy with magnesium and its effect on microstructure and mechanical properties , 2018 .

[21]  Deyuan Zhang,et al.  Evolution of the degradation mechanism of pure zinc stent in the one-year study of rabbit abdominal aorta model. , 2017, Biomaterials.

[22]  Hua-nan Liu,et al.  The precipitation behavior of MgZn2 and Mg4Zn7 phase in Mg-6Zn (wt.%) alloy during equal-channel angular pressing , 2017 .

[23]  G. Yuan,et al.  Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications. , 2017, Journal of the mechanical behavior of biomedical materials.

[24]  H. Maier,et al.  Zn-Li alloy after extrusion and drawing: Structural, mechanical characterization, and biodegradation in abdominal aorta of rat. , 2017, Materials science & engineering. C, Materials for biological applications.

[25]  Hua-nan Liu,et al.  A two-step dynamic recrystallization induced by LPSO phases and its impact on mechanical property of severe plastic deformation processed Mg97Y2Zn1 alloy , 2017 .

[26]  Huihui Yu,et al.  The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys , 2017 .

[27]  Hua-nan Liu,et al.  Dynamic precipitation behavior and mechanical property of an Mg94Y4Zn2 alloy prepared by multi-pass successive equal channel angular pressing , 2017 .

[28]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[29]  W. Ding,et al.  Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application. , 2016, Materials science & engineering. C, Materials for biological applications.

[30]  J. Kubásek,et al.  Microstructure and mechanical properties of the micrograined hypoeutectic Zn–Mg alloy , 2016, International Journal of Minerals, Metallurgy, and Materials.

[31]  Yufeng Zheng,et al.  Mechanical properties, in vitro degradation behavior, hemocompatibility and cytotoxicity evaluation of Zn–1.2Mg alloy for biodegradable implants , 2016 .

[32]  D Mantovani,et al.  Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation. , 2016, Journal of the mechanical behavior of biomedical materials.

[33]  Patrick K. Bowen,et al.  Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn‐Alloys , 2016, Advanced healthcare materials.

[34]  Yufeng Zheng,et al.  Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn–1.5Mg alloy , 2016 .

[35]  Yufeng Zheng,et al.  Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application , 2016 .

[36]  D. Kurniawan,et al.  Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn-3Mg alloy as potential biodegradable implant material , 2015 .

[37]  Yufeng Zheng,et al.  Design and characterizations of novel biodegradable ternary Zn-based alloys with IIA nutrient alloying elements Mg, Ca and Sr , 2015 .

[38]  S. H. Chen,et al.  Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr , 2015, Scientific Reports.

[39]  S. Yeap,et al.  Cytotoxicity evaluation of biodegradable Zn-3Mg alloy toward normal human osteoblast cells. , 2015, Materials science & engineering. C, Materials for biological applications.

[40]  Yufeng Zheng,et al.  Comparative in vitro Study on Pure Metals (Fe, Mn, Mg, Zn and W) as Biodegradable Metals , 2013 .

[41]  J. Kubásek,et al.  Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation. , 2011, Acta biomaterialia.

[42]  K. Hagihara,et al.  Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy , 2010 .

[43]  M. Medraj,et al.  Critical assessment and thermodynamic modeling of the binary Mg–Zn, Ca–Zn and ternary Mg–Ca–Zn systems , 2009 .

[44]  David J. Smith,et al.  An investigation of grain boundaries in submicrometer-grained Al-Mg solid solution alloys using high-resolution electron microscopy , 1996 .

[45]  Li Li,et al.  Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn-Mg-Sr alloys as biodegradable metals , 2016 .