Direct-Drive Wind Generator Concept with Non-Rare-Earth PM Flux Intensifying Stator and Reluctance Outer Rotor

This paper proposes a novel concept for an electric generator in which both ac windings and permanent magnets (PMs) are placed in the stator. Concentrated windings with a special pattern and phase coils placed in separate slots are employed. The PMs are positioned in a spoke-type field concentrating arrangement, which provides high flux intensification and enables the use of lower remanence and energy non-rare earth magnets. The rotor is exterior to the stator and has a simple and robust reluctance-type configuration without any active electromagnetic excitation components. The principle of operation is introduced based on the concept of virtual work with closed-form analytical airgap flux density distributions. Initial and parametric design studies were performed using electromagnetic FEA for a 3MW direct-drive wind turbine generator employing PMs of different magnetic remanence and specific energy. Results include indices for the goodness of excitation and the goodness of the electric machine designs; loss; and efficiency estimations, indicating that performance comparable to PM synchronous designs employing expensive and critical supply rare-earth PMs may be achieved with non-rare earth PMs using the proposed configuration.

[1]  Ali Mohammadi,et al.  Design of a Novel PM-Assisted Synchronous Reluctance Motor Topology Using V-Shape Permanent Magnets for Improvement of Torque Characteristic , 2022, IEEE Transactions on Energy Conversion.

[2]  C. J. Flynn,et al.  Design Optimization of a Very High Power Density Motor with a Reluctance Rotor and a Modular Stator Having PMs and Toroidal Windings , 2021, 2021 IEEE Energy Conversion Congress and Exposition (ECCE).

[3]  Peng Han,et al.  Analysis of Torque Production in Axial-flux Vernier PM Machines of the MAGNUS Type , 2021, 2021 IEEE International Electric Machines & Drives Conference (IEMDC).

[4]  P. Thies,et al.  Data Insights from an Offshore Wind Turbine Gearbox Replacement , 2018, Journal of Physics: Conference Series.

[5]  Dan M. Ionel,et al.  Design Optimization of a High Torque Density Spoke-Type PM Motor for a Formula E Race Drive Cycle , 2018, IEEE Transactions on Industry Applications.

[6]  Andreas Binder,et al.  Electromagnetic design of a permanent magnet Flux-Switching-Machine as a direct-driven 3 MW wind power generator , 2018, 2018 IEEE International Conference on Industrial Technology (ICIT).

[7]  James Carroll,et al.  Failure rate, repair time and unscheduled O&M cost analysis of offshore wind turbines , 2016 .

[8]  Frede Blaabjerg,et al.  Renewable Energy Devices and Systems – State-of-the-Art Technology, Research and Development, Challenges and Future Trends , 2015 .

[9]  R. Dutta,et al.  Review of PM generator designs for direct-drive wind turbines , 2012, 2012 22nd Australasian Universities Power Engineering Conference (AUPEC).

[10]  Aki Mikkola,et al.  Direct-drive permanent magnet generators for high-power wind turbines: benefits and limiting factors , 2012 .

[11]  H. Polinder,et al.  Comparison of direct-drive and geared generator concepts for wind turbines , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[12]  Alexander P. Turner,et al.  Permanent magnet brushless motors for industrial variable speed drives , 2002 .

[13]  Alexey Matveev,et al.  High-power generators for offshore wind turbines , 2013 .

[14]  Bath Ba,et al.  Finite Element Analysis Of A Novel Brushless DC Motor With Flux Barriers , 1995 .