Experimental investigation on uniaxial tensile properties of high-porosity metal fiber sintered sheet

[1]  P. S. Liu,et al.  Mechanical relation of foamed metals under uniaxial and biaxial loads of collective tension and compression , 2009 .

[2]  Zhang Bo,et al.  Calculation of sound absorption characteristics of porous sintered fiber metal , 2009 .

[3]  Yong Tang,et al.  Porous copper fiber sintered felts: An innovative catalyst support of methanol steam reformer for hydrogen production , 2008 .

[4]  T. W. Clyne,et al.  Ferrous Fibre Network Materials for Jet Noise Reduction in Aeroengines Part II: Thermo-Mechanical Stability† , 2008 .

[5]  Ye Liu,et al.  Microfibrous entrapped Ni/Al2O3 using SS‐316 fibers for H2 production from NH3 , 2007 .

[6]  P. S. Liu.  Mechanical behaviors of porous metals under biaxial tensile loads , 2006 .

[7]  Jianhong Xu,et al.  Mass transfer performance and two-phase flow characteristic in membrane dispersion mini-extractor , 2005 .

[8]  Qin Xin,et al.  Study of sintered stainless steel fiber felt as gas diffusion backing in air-breathing DMFC , 2004 .

[9]  Ramana G. Reddy,et al.  Materials and design development for bipolar/end plates in fuel cells , 2004 .

[10]  T. Clyne,et al.  Production of a highly porous material by liquid phase sintering of short ferritic stainless steel fibres and a preliminary study of its mechanical behaviour , 2003 .

[11]  L. Kiwi-Minsker,et al.  Structured combustion catalysts based on sintered metal fibre filters , 2003 .

[12]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[13]  The tensile strength of porous metals with high porosity , 2000 .

[14]  P. Ducheyne,et al.  The mechanical behaviour of porous austenitic stainless steel fibre structures , 1978 .

[15]  A. G. Kostornov,et al.  Strength properties of high-porosity metal fiber materials , 1972 .