Controllable in situ fabrication of self-lubricating nanocomposite coating for light alloys
暂无分享,去创建一个
Yong-qing Zhao | Qinyang Zhao | Zehui Yang | Shao-peng Wang | Hongzhan Li | Yongnan Chen | Yiku Xu | Zhen Zhang | H. Zhan | Fengying Zhang | Jianmin Hao
[1] P. Zhu,et al. Superior lubrication and electrical stability of graphene as highly effective solid lubricant at sliding electrical contact interface , 2021 .
[2] Peng Wang,et al. Ultrahigh radiation resistance of nanocrystalline diamond films for solid lubrication in harsh radiative environments , 2021 .
[3] Kenji Watanabe,et al. UItra-low friction and edge-pinning effect in large-lattice-mismatch van der Waals heterostructures , 2021, Nature Materials.
[4] Hyun Jae Kim,et al. Highly sensitive active pixel image sensor array driven by large-area bilayer MoS2 transistor circuitry , 2021, Nature Communications.
[5] M. Ferry,et al. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition , 2021, Science Advances.
[6] Junyan Zhang,et al. A novel in-situ exothermic assisted sintering high entropy Al2O3/(NbTaMoW)C composites: Microstructure and mechanical properties , 2021 .
[7] C. Shi,et al. In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering , 2021 .
[8] Tai-De Li,et al. Spatial defects nanoengineering for bipolar conductivity in MoS2 , 2020, Nature Communications.
[9] Pei Liu,et al. The role of incoherent interface in evading strength-ductility trade-off dilemma of Ti2AlN/TiAl composite: A combined in-situ TEM and atomistic simulations , 2020 .
[10] You Zhang,et al. 1Influence of graphene oxide additive on the tribological and electrochemical corrosion properties of a PEO coating prepared on AZ31 magnesium alloy , 2020 .
[11] B. Derin,et al. Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings , 2019, Surface and Coatings Technology.
[12] H. Zhou,et al. Effects of ZrO2 crystal structure on the tribological properties of copper metal matrix composites , 2019, Tribology International.
[13] Q. Xue,et al. Study on atmospheric tribology performance of MoS2–W films with self-adaption to temperature , 2019, Ceramics International.
[14] D. Quintero,et al. Comparison among the lubricated and unlubricated tribological behavior of coatings obtained by PEO on the Ti6Al4V alloy in alkaline solutions , 2018, Tribology International.
[15] H. Pu,et al. Synthesis and characterization of monolayer Er-doped MoS2 films by chemical vapor deposition , 2018, Scripta Materialia.
[16] Byeong-Chan Suh,et al. Designing a magnesium alloy with high strength and high formability , 2018, Nature Communications.
[17] Liping Wang,et al. An investigation on the lubrication mechanism of MoS2 nanoparticles in unidirectional and reciprocating sliding point contact: The flow pattern effect around contact area , 2018, Tribology International.
[18] Zhanqiang Liu,et al. Enhancing tribological performance by anodizing micro-textured surfaces with nano-MoS2 coatings prepared on aluminum-silicon alloys , 2018, Tribology International.
[19] P. Lutz,et al. Surface modification of Ti 13Nb 13Zr by plasma electrolytic oxidation , 2018 .
[20] Kenneth Holmberg,et al. Influence of tribology on global energy consumption, costs and emissions , 2017, Friction.
[21] Xiaohang Li,et al. The influence of plasma nitriding on microstructure and properties of CrN and CrNiN coatings on Ti6Al4V by magnetron sputtering , 2017 .
[22] B. Lou,et al. Microstructure and mechanical properties evaluation of molybdenum disulfide-titania nanocomposite coatings grown by plasma electrolytic oxidation , 2016 .
[23] D. Xiong,et al. Adaptive-lubricating PEO/Ag/MoS2 multilayered coatings for Ti6Al4V alloy at elevated temperature , 2016 .
[24] R. Song,et al. A study on microstructure and corrosion resistance of ZrO2-containing PEO coatings formed on AZ31 Mg alloy in phosphate-based electrolyte , 2015 .
[25] Zhenhua Liao,et al. Study on improved tribological properties by alloying copper to CP-Ti and Ti-6Al-4V alloy. , 2015, Materials science & engineering. C, Materials for biological applications.
[26] D. Xiong,et al. Characterization and friction behavior of LST/PEO duplex-treated Ti6Al4V alloy with burnished MoS2 film , 2015 .
[27] Jin Zhang,et al. Effect of ZrO2 particle on the performance of micro-arc oxidation coatings on Ti6Al4V , 2015 .
[28] D. Xiong,et al. Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film , 2015 .
[29] Shuhong Yu,et al. An efficient molybdenum disulfide/cobalt diselenide hybrid catalyst for electrochemical hydrogen generation , 2015, Nature Communications.
[30] Na Liu,et al. Large-area atomically thin MoS2 nanosheets prepared using electrochemical exfoliation. , 2014, ACS nano.
[31] James C. Williams,et al. Perspectives on Titanium Science and Technology , 2013 .
[32] M. Mu,et al. One-step preparation of TiO2/MoS2 composite coating on Ti6Al4V alloy by plasma electrolytic oxidation and its tribological properties , 2013 .
[33] Vamsi Krishna Balla,et al. Laser processing of in situ synthesized TiB-TiN-reinforced Ti6Al4V alloy coatings , 2012 .
[34] Kenneth Holmberg,et al. Global energy consumption due to friction in passenger cars , 2012 .
[35] N. Tao,et al. Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper , 2011, Science.
[36] Jun Liang,et al. Comparison of electrochemical corrosion behaviour of MgO and ZrO2 coatings on AM50 magnesium alloy formed by plasma electrolytic oxidation , 2009 .
[37] G. Amaratunga,et al. Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear , 2000, Nature.