For the passed several years, the Naval Research Laboratory (NRL) has been investigating the use of Carbon Fiber Reinforced Polymer (CFRP) material in the construction of a telescope assembly including the optical components. The NRL, Sandia National Laboratories (SNL), and Composite Mirror Applications, Inc. (CMA) have jointly assembled a prototype telescope and achieved “first light” images with a CFRP 0.4 m aperture telescope. CFRP offers several advantages over traditional materials such as creating structures that are lightweight and low coefficient of thermal expansion and conductivity. The telescope’s primary and secondary mirrors are not made from glass, but CFRP, as well. The entire telescope weighs approximately 10 kg while a typical telescope of this size would weigh quite a bit more. We present the achievement of “first light” with this telescope demonstrating the imaging capabilities of this prototype and the optical surface quality of the mirrors with images taken during a day’s quiescent periods.
[1]
Scott W. Teare,et al.
Mounting a deformable mirror onto a controllable tip/tilt platform
,
2005,
SPIE MOEMS-MEMS.
[2]
Scott W. Teare,et al.
A lightweight adaptive telescope
,
2006,
SPIE Optics + Photonics.
[3]
G. Charmaine Gilbreath,et al.
Experimental results of a MEMS-based adaptive optics system
,
2005
.
[4]
Sergio R. Restaino,et al.
Ultra-light weight telescope coupled with portable AO system for laser communications applications
,
2006,
SPIE LASE.
[5]
J. Hardy,et al.
Adaptive Optics for Astronomical Telescopes
,
1998
.