The systematic application of quality measures and process control in clinical radiation oncology.

There has been growing emphasis on quality measures and process analysis techniques that may be implemented in the daily practice of radiation oncology to improve the overall quality of patient care. In this work, quality measures are a form of monitoring that should be actionable and specific to guide process improvement efforts. They are most effective when used to determine the level of execution proficiency against a standard. Control charts are an effective way to separate a change in the process from process noise such that the user can focus on issues that are more likely to improve quality. The field of radiotherapy would benefit from a common dashboard of quality measures for the different processes in radiation oncology clinics, and some suggestions are provided. The dashboard would be used to provide continuous feedback on a clinic's capability to maintain or exceed standards.

[1]  Todd Pawlicki,et al.  Statistical process control for radiotherapy quality assurance. , 2005, Medical physics.

[2]  Donald J. Wheeler,et al.  Understanding Statistical Process Control , 1986 .

[3]  J. Hayman Measuring the quality of care in radiation oncology. , 2008, Seminars in radiation oncology.

[4]  Raymond G. Carey,et al.  Improving Healthcare with Control Charts: Basic and Advanced SPC Methods and Case Studies , 2002 .

[5]  Todd Pawlicki,et al.  Moving from IMRT QA measurements toward independent computer calculations using control charts. , 2008, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[6]  Vincent Marchesi,et al.  A comprehensive analysis of the IMRT dose delivery process using statistical process control (SPC). , 2009, Medical physics.

[7]  Todd Pawlicki,et al.  Quality and Safety in Radiotherapy , 2010 .

[8]  Todd Pawlicki,et al.  Process control analysis of IMRT QA: implications for clinical trials , 2008, Physics in medicine and biology.

[9]  Paul Keall,et al.  Failure mode and effect analysis-based quality assurance for dynamic MLC tracking systems. , 2010, Medical physics.

[10]  Genichii Taguchi,et al.  Introduction to quality engineering. designing quality into products a , 1986 .

[11]  Todd Pawlicki,et al.  Radiation oncology Lean Six Sigma project selection based on patient and staff input into a modified quality function deployment , 2008 .

[12]  Guanghua Yan,et al.  On the sensitivity of patient‐specific IMRT QA to MLC positioning errors , 2009, Journal of applied clinical medical physics.

[13]  M. Steinberg Introduction: health policy and health care economics observed. , 2008, Seminars in radiation oncology.

[14]  Michael B Sharpe,et al.  Statistical process control for IMRT dosimetric verification. , 2008, Medical physics.

[15]  K Holli,et al.  Quality control in health care: an experiment in radiotherapy planning for breast cancer patients after mastectomy. , 1999, International journal of radiation oncology, biology, physics.

[16]  Laval Grimard,et al.  The management of radiation treatment error through incident learning. , 2010, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.

[17]  K. Holli,et al.  Quality assurance in radiotherapy of breast cancer--variability in planning target volume delineation. , 2001, Acta oncologica.

[18]  Fang-Fang Yin,et al.  Task Group 142 report: quality assurance of medical accelerators. , 2009, Medical physics.