Hot working characteristics of nickel-base superalloy 740H during compression

[1]  Jian-xin Dong,et al.  A new prediction model of steady state stress based on the influence of the chemical composition for nickel-base superalloys , 2010 .

[2]  P. Čížek,et al.  Dynamic Recrystallization of Austenite in Ni-30 Pct Fe Model Alloy: Microstructure and Texture Evolution , 2009 .

[3]  A. Najafizadeh,et al.  Correlation between Zener-Hollomon parameter and necklace DRX during hot deformation of 316 stainless steel , 2009 .

[4]  W. Shao,et al.  Flow behavior and microstructures of superalloy 718 during high temperature deformation , 2008 .

[5]  H. Fu,et al.  Deformation characteristics of as-received Haynes230 nickel base superalloy , 2008 .

[6]  Mark F. Horstemeyer,et al.  Optimization of the LENS® process for steady molten pool size , 2008 .

[7]  M. Chaturvedi,et al.  The effect of prior annealing on high temperature flow properties of and microstructural evolution in SPF grade IN718 superalloy , 2007 .

[8]  Xishan Xie,et al.  Research and Improvement on structure stability and corrosion resistance of nickel-base superalloy INCONEL alloy 740 , 2006 .

[9]  J. Shingledecker,et al.  U.S. program on materials technology for ultra-supercritical coal power plants , 2005 .

[10]  P. Maziasz,et al.  Microstructure and phase stability in INCONEL alloy 740 during creep , 2004 .

[11]  Taku Sakai,et al.  Preferential nucleation of dynamic recrystallization at triple junctions , 2004 .

[12]  J. M. Rodriguez-Ibabe,et al.  Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steels , 2003 .

[13]  Xishan Xie,et al.  Microstructural stability and mechanical properties of a new nickel-based superalloy , 2003 .

[14]  H. J. McQueen,et al.  Constitutive analysis in hot working , 2002 .

[15]  S. Semiatin,et al.  The adiabatic correction factor for deformation heating during the uniaxial compression test , 2001 .

[16]  T. Sakai.  Dynamic recrystallization microstructures under hot working conditions , 1995 .

[17]  N. Srinivasa,et al.  Hot working characteristics of nimonic 75, 80A and 90 superalloys: a comparison using processing maps , 1995 .

[18]  John J. Jonas,et al.  Prediction of steel flow stresses at high temperatures and strain rates , 1991 .

[19]  S. M. Doraivelu,et al.  Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242 , 1984 .

[20]  C. M. Sellars,et al.  Temperature and flow stress during the hot extrusion of steel , 1974 .

[21]  C. M. Sellars,et al.  Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation , 1969 .