A New Single-Step Technique to Fabricate Transparent Hydrophobic Surfaces Utilizable in Perovskite Solar Cells

[1]  Yanlong Gu,et al.  Increasing the Surface Hydrophobicity of Silicone Rubber by Electron Beam Irradiation in the Presence of a Glycerol Layer , 2022, Applied Surface Science.

[2]  Hao Lu,et al.  Self-Cleaning Performance of Super-Hydrophilic Coatings for Dust Deposition Reduction on Solar Photovoltaic Cells , 2021, Coatings.

[3]  A. Fujishima,et al.  Low Temperature Deposition of TiO2 Thin Films through Atmospheric Pressure Plasma Jet Processing , 2021, Catalysts.

[4]  Furkan H. Isikgor,et al.  Scaling-up perovskite solar cells on hydrophobic surfaces , 2020 .

[5]  Hao Sun,et al.  Effects of ITO Substrate Hydrophobicity on Crystallization and Properties of MAPbBr3 Single-Crystal Thin Films , 2020, ACS omega.

[6]  A. Kozlov,et al.  Silicon dioxide films prepared by the sol-gel method for use in elements of microsystem technique , 2020, Journal of Physics: Conference Series.

[7]  W. Shen,et al.  High efficiency perovskite solar cells with tailorable surface wettability by surfactant , 2020 .

[8]  W. Shen,et al.  Highly efficient and stable perovskite solar cells via bilateral passivation layers , 2019, Journal of Materials Chemistry A.

[9]  Xianping Liu,et al.  Fabrication of super-hydrophobic nickel film on copper substrate with improved corrosion inhibition by electrodeposition process , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[10]  P. J. Rivero,et al.  Hydrophobic and Corrosion Behavior of Sol-Gel Hybrid Coatings Based on the Combination of TiO2 NPs and Fluorinated Chains for Aluminum Alloys Protection , 2018, Metals.

[11]  J. Xu,et al.  Atmospheric-pressure plasma-enhanced chemical vapor deposition of UV-shielding TiO2 coatings on transparent plastics , 2018, Materials Letters.

[12]  S. Glunz,et al.  SiO2 surface passivation layers – a key technology for silicon solar cells , 2018, Solar Energy Materials and Solar Cells.

[13]  Yongli Gao,et al.  Efficient and stable hole-conductor-free mesoscopic perovskite solar cells using SiO 2 as blocking layer , 2018, Organic Electronics.

[14]  H. Ali,et al.  Techniques for the Fabrication of Super-Hydrophobic Surfaces and Their Heat Transfer Applications , 2018, Heat Transfer - Models, Methods and Applications.

[15]  P. McIntyre,et al.  Thermal Stability of Mixed Cation Metal Halide Perovskites in Air. , 2018, ACS applied materials & interfaces.

[16]  J. An,et al.  Ultraviolet light-induced wettability control of ultrathin atomic layer deposited TiO 2 film surface , 2017 .

[17]  Zhengjun Zhang,et al.  Annealing effect on the photoelectrochemical and photocatalytic performance of TiO2 nanorod arrays , 2017 .

[18]  Yi-bing Cheng,et al.  Eliminated hysteresis and stabilized power output over 20% in planar heterojunction perovskite solar cells by compositional and surface modifications to the low-temperature-processed TiO2 layer , 2017 .

[19]  S. Valiyaveettil,et al.  Synthesis and Characterization of Superhydrophobic, Self-cleaning NIR-reflective Silica Nanoparticles , 2016, Scientific Reports.

[20]  Xingzhong Zhao,et al.  Application of mesoporous SiO2 layer as an insulating layer in high performance hole transport material free CH3NH3PbI3 perovskite solar cells , 2016 .

[21]  Jinsong Huang,et al.  Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells , 2016, Advanced materials.

[22]  Seyed Mojtaba Zebarjad,et al.  A study on the tensile properties of silicone rubber/polypropylene fibers/silica hybrid nanocomposites. , 2016, Journal of the mechanical behavior of biomedical materials.

[23]  H. Hillborg,et al.  Silicone rubber with improved hydrophobicity , 2015, 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP).

[24]  Lung-Chien Chen,et al.  Annealing effects on high-performance CH3NH3PbI3 perovskite solar cells prepared by solution-process , 2015 .

[25]  Biao Wang,et al.  Magnetron sputtering deposition of TiO2 particles on polypropylene separators for lithium-ion batteries , 2015 .

[26]  Qiang Chen,et al.  Preparation Methods and Application of Silicon Oxide Films , 2014 .

[27]  P. B. Wagh,et al.  Superhydrophobic silica coating by dip coating method , 2013 .

[28]  Jeong Y. Park,et al.  Tuning hydrophobicity of TiO2 layers with silanization and self-assembled nanopatterning. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[29]  Ivan P Parkin,et al.  Preparation and characterisation of super-hydrophobic surfaces. , 2010, Chemistry.

[30]  G. Julius Vancso,et al.  Hydrophobic recovery of UV/ozone treated poly(dimethylsiloxane): adhesion studies by contact mechanics and mechanism of surface modification , 2005 .

[31]  K. Izumi,et al.  Diffusion of low molecular weight siloxane from bulk to surface , 1999 .

[32]  Tai-Ju Chen,et al.  Investigation of silicon oxide films prepared by room-temperature ion plating , 1998 .

[33]  C. Bhoomanee,et al.  Room-temperature carbon electrodes with ethanol solvent interlacing process for efficient and stable planar hybrid perovskite solar cells , 2021 .

[34]  N. Ibrahim,et al.  Functionalization of Graphene Oxide via Gamma-Ray Irradiation for Hydrophobic Materials , 2019, Synthesis, Technology and Applications of Carbon Nanomaterials.

[35]  Ş. Antohe,et al.  On Titanium Oxide Spray Deposited Thin Films for Solar Cells Applications , 2012 .

[36]  Koji Takahashi.  SIMPLE FABRICATION OF HYDROPHOBIC SURFACE FOR HIGH-TEMPERATURE MICROSYSTEMS , 2003 .