Energy balance and efficiency of the pulsed plasma thruster

The overall, thruster, and accelerator efficiencies of the pulsed plasma thruster (PPT) are defined in terms of the product of power processing unit, transfer, sheath, heat loss and frozen flow efficiencies. The exhaust kinetic energy of the PPT is evaluated by the introduction of a Maxwellian distribution for the flow velocity, corresponding to available specific impulse, velocity and ionization data from the LES-6 thruster. The Maxwellian is proposed as appropriate for a PPT exhaust in which a Saha-type ionization process is driven by an electron temperature small compared to the ionization potentials, and where the bulk of the low velocity particles is weakly accelerated to very small velocities compared to the average. The transfer, sheath, heat loss and frozen flow efficiencies are estimated using available data for the LES6 PPT, permitting energy estimates for each stage in the acceleration process. One of the predictions is that the ions, constituting 10% of the mass, carry nearly 50% of the kinetic energy and about 25% of the impulse bit. An estimate is made of the maximum possible efficiency for rectangular and coaxial PPT's.

[1]  R. Burton,et al.  Energy-mass coupling in high-pressure liquid-injected arcs , 1991 .

[2]  Gregory G. Spanjers,et al.  The effect of propellant temperature on efficiency in the Pulsed Plasma Thruster , 1997 .

[3]  John J. Lowke,et al.  Theoretical predictions of ablation-stabilised arcs confined in cylindrical tubes , 1984 .

[4]  William J. Guman,et al.  Pulsed Plasma Propulsion Technology. , 1974 .

[5]  Stewart S. Bushman,et al.  A COMPACT THRUST STAND FOR PULSED PLASMA THRUSTERS , 1997 .

[6]  Robert J. Vondra,et al.  A pulsed electric thruster for satellite control , 1971 .

[7]  George P. Sutton,et al.  Rocket propulsion elements - An introduction to the engineering of rockets (6th revised and enlarged edition) , 1963 .

[8]  K. Thomassen,et al.  Exhaust Velocity Studies of a Solid Teflon Pulsed Plasma Thruster , 1971 .

[9]  William J. Guman.  Pulsed Plasma Technology in Microthrusters , 1968 .

[10]  Stewart S. Bushman,et al.  ARC MEASUREMENTS AND PERFORMANCE CHARACTERISTICS OF A COAXIAL PULSED PLASMA THRUSTER , 1998 .

[11]  Scott Allen Bufton.  Exit plane plasma measurements of a low-power hydrazine arcjet , 1996 .

[12]  N. N. Ogurtsova,et al.  CALCULATION OF THE PARAMETERS OF AN OPTICALLY DENSE PLASMA OBTAINED BY A DISCHARGE WITH AN EVAPORATING WALL. , 1971 .

[13]  Robert J. Vondra,et al.  A Flight Qualified Pulsed Electric Thruster for Satellite Control. , 1973 .

[14]  P. Turchi,et al.  Pulsed Plasma Thruster , 1998 .

[15]  D. C. Spanner,et al.  Introduction to Thermodynamics , 1964 .

[16]  R. Myers,et al.  Design and operation of a laboratory benchmark PPT , 1996 .

[17]  K. Mcfall,et al.  Propellant Losses Because of Particulate Emission in a Pulsed Plasma Thruster , 1998 .

[18]  K. Thomassen,et al.  Analysis of Solid Teflon Pulsed Plasma Thruster , 1970 .

[19]  Robert J. Vondra,et al.  Performance Study of a Solid Fuel-Pulsed Electric Microthruster , 1972 .