Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading

In order to understand the physics of the delamination onset in laminated composites, an experimental investigation of delamination growth is presented. The main objective of this paper is to demonstrate that delamination onset occurs at lower values than Gc defined by the ASTM standards, and that the strain energy release rate level at which the crack growth onset occurs under any mixed mode I/II loading is governed by the critical strain energy density (SED) approach. Quasi-static delamination experiments have been performed under mode I, mode II and mixed mode I/II loadings. The value of the strain energy release rate at the observed crack onset and the angle of the initial crack growth were correlated with the SED theory to test the validity. The acoustic emission was also used to provide more insight into the physics of the delamination growth. The investigation shows that the onset of delamination growth occurs at the strain energy release rate levels predicted by the critical SED approach, and well before reaching the critical strain energy release rate determined via delamination tests following the ASTM standards. Moreover, results indicated that the predicted angle of the initial crack for delamination onset was in a good agreement with the experimental data

[1]  M. Heidari-Rarani,et al.  Effect of interface fiber angle on the R-curve behavior of E-glass/epoxy DCB specimens , 2016 .

[2]  Rinze Benedictus,et al.  Towards a physics-based relationship for crack growth under different loading modes , 2018 .

[3]  Mahdi Fakoor,et al.  Mixed mode I/II fracture criterion for orthotropic materials based on damage zone properties , 2016 .

[4]  R. Khan.  Delamination Growth in Composites under Fatigue Loading , 2013 .

[5]  Renaud Gutkin,et al.  On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses , 2011 .

[6]  Lars Olof Jernkvist,et al.  Fracture of wood under mixed mode loading: I. Derivation of fracture criteria , 2001 .

[7]  J. Bonhomme,et al.  Fractography and failure mechanisms in static mode I and mode II delamination testing of unidirectional carbon reinforced composites , 2009 .

[8]  V. Tamužs,et al.  Progressive delamination and fiber bridging modeling in double cantilever beam composite specimens , 2001 .

[9]  C. Gustafson,et al.  Effect of matrix resin on delamination fatigue crack growth in CFRP laminates , 1994 .

[10]  M. Shokrieh,et al.  A Novel Method for Calculation of Strain Energy Release Rate of Asymmetric Double Cantilever Laminated Composite Beams , 2014, Applied Composite Materials.

[11]  W. Jordan,et al.  Micromechanisms of Fracture in Toughened Graphite-Epoxy Laminates , 1987 .

[12]  Emile S. Greenhalgh,et al.  Fractographic observations on delamination growth and the subsequent migration through the laminate , 2009 .

[13]  George C. Sih,et al.  Mechanics of Fracture Initiation and Propagation: Surface and volume energy density applied as failure criterion , 2012 .

[14]  Mf Hibbs,et al.  Correlations Between Micromechanical Failure Processes and the Delamination Toughness of Graphite/Epoxy Systems , 1987 .

[15]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[16]  J. Williams,et al.  Mechanics and mechanisms of delamination in a poly(ether sulphone)—Fibre composite , 1990 .

[17]  F. Erdogan,et al.  On the Crack Extension in Plates Under Plane Loading and Transverse Shear , 1963 .

[18]  Mahdi Fakoor,et al.  A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects , 2018 .

[19]  Matthew R. Eplett,et al.  Experimental assessment of mixed-mode partition theories for generally laminated composite beams , 2015 .

[20]  Leif Asp,et al.  Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading , 2004 .

[21]  Mahdi Fakoor,et al.  A modified model for simulation of mode I delamination growth in laminated composite materials , 2016 .

[22]  Rinze Benedictus,et al.  Energy dissipation in mode II fatigue crack growth , 2017 .

[23]  P. C. Paris,et al.  On cracks in rectilinearly anisotropic bodies , 1965 .

[24]  Roham Rafiee,et al.  Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion , 2013, Strength of Materials.

[25]  The strain energy density function , 1986 .

[26]  Giangiacomo Minak,et al.  Delamination evaluation of composite laminates with different interface fiber orientations using acoustic emission features and micro visualization , 2017 .

[27]  J. Mahishi.  An integrated micromechanical and macromechanical approach to fracture behavior of fiber-reinforced composites , 1986 .

[28]  Hussain,et al.  Strain Energy Release Rate for a Crack Under Combined Mode I and Mode II , 1974 .