Damage behavior and failure mechanism of composite sandwich panel subjected to localized impact: A comprehensive study

[1]  Yong Zhou,et al.  Mechanical responses of CFRP/PVC foam sandwich plate impacted by hailstone , 2023, International Journal of Impact Engineering.

[2]  Jiayi Liu,et al.  High-velocity impact resistance of stepwise gradient sandwich beams with metal foam cores , 2022, Thin-Walled Structures.

[3]  Xinwei Wang,et al.  A comprehensive analysis of damage behaviors of composite sandwich structures under localized impact , 2022, Mechanics of Advanced Materials and Structures.

[4]  N. Goo,et al.  Mechanical behaviors and fracture mechanisms of CFRP sandwich composite structures with bio-inspired thin-walled corrugated cores , 2022, Aerospace Science and Technology.

[5]  Qing Li,et al.  Mechanical characterization and numerical modeling on the yield and fracture behaviors of Polymethacrylimide (PMI) foam materials , 2021, International Journal of Mechanical Sciences.

[6]  Hongjian Wang,et al.  Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels , 2021, Thin-Walled Structures.

[7]  Yefei Zhu,et al.  Low-velocity impact response of multilayer foam core sandwich panels with composite face sheets , 2021 .

[8]  Jun Liu,et al.  Modelling the quasi-static flexural behaviour of composite sandwich structures with uniform- and graded-density foam cores , 2021, Engineering Fracture Mechanics.

[9]  Xiaoying Cheng,et al.  Transverse impact response of hybrid biaxial/uniaxial braided composite tubes , 2021 .

[10]  Qing Li,et al.  On the structural parameters of honeycomb-core sandwich panels against low-velocity impact , 2021, Composites Part B: Engineering.

[11]  Ni Li,et al.  Transverse impact damage and axial compression failure of square braided CFRP/PMI sandwich composite beams , 2021 .

[12]  Yan Li,et al.  Modelling damage evolution and CAI strength of composite laminates under biaxial compression , 2021, Journal of Composite Materials.

[13]  W. Huang,et al.  Fabrication and mechanical characterization of CFRP X-core sandwich panels , 2021, Thin-Walled Structures.

[14]  Zhongxiang Pan,et al.  Damage assessment of braided composite tube subjected to repeated transverse impact , 2020 .

[15]  Xitao Zheng,et al.  Bridging the low-velocity impact energy versus impact damage and residual compression strength for composite laminates , 2020 .

[16]  F. Al-Sulaiman,et al.  Experimental and Computational Analysis of Low-Velocity Impact on Carbon-, Glass- and Mixed-Fiber Composite Plates , 2020, Journal of Composites Science.

[17]  Qing Li,et al.  On low-velocity impact response of foam-core sandwich panels , 2020 .

[18]  Bruno Castanié,et al.  Review of composite sandwich structure in aeronautic applications , 2020, Composites Part C: Open Access.

[19]  Y. Rajapakse,et al.  Sandwich Structures , 2020, Catalysis from A to Z.

[20]  W. Feng,et al.  Experimental and numerical investigation on damage behavior of honeycomb sandwich panel subjected to low-velocity impact , 2020 .

[21]  Yubing Hu,et al.  Quasi-static compressive strength of polymethacrylimide foam-filled square carbon fiber reinforced composite honeycombs , 2020 .

[22]  Akar Dogan,et al.  Low-velocity impact, bending, and compression response of carbon fiber/epoxy-based sandwich composites with different types of core materials , 2020 .

[23]  F. Balıkoğlu,et al.  Improving four-point bending performance of marine composite sandwich beams by core modification , 2020 .

[24]  Xinwei Wang,et al.  On stability and damage behavior of asymmetric sandwich panels under uniaxial compression , 2020 .

[25]  D. Fang,et al.  Numerical study of composite laminates subjected to low-velocity impact using a localized damage algorithm of Puck's 3D IFF criterion , 2020 .

[26]  Jiale Jia,et al.  Fabrication and low-velocity impact response of pyramidal lattice stitched foam sandwich composites , 2020 .

[27]  Qing Li,et al.  Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres , 2019, Composites Part B: Engineering.

[28]  Zhenkun Lei,et al.  Compression after impact behavior of composite foam-core sandwich panels , 2019, Composite Structures.

[29]  Victor Birman,et al.  Review of current trends in research and applications of sandwich structures , 2018, Composites Part B: Engineering.

[30]  Aiguo Cheng,et al.  Modeling for CFRP structures subjected to quasi-static crushing , 2018 .

[31]  Shujuan Hou,et al.  Low-velocity impact response of composite sandwich structures: Modelling and experiment , 2017 .

[32]  J. Xiong,et al.  Static mechanical properties of hybrid RTM-made composite I- and Π-beams under three-point flexure , 2015 .

[33]  Q. Ye,et al.  Prediction of damage area in laminated composite plates subjected to low velocity impact , 2014 .

[34]  A. Rajaneesh,et al.  Relative performance of metal and polymeric foam sandwich plates under low velocity impact , 2014 .

[35]  P. F. Liu,et al.  A nonlinear cohesive model for mixed-mode delamination of composite laminates , 2013 .

[36]  M. Rinker,et al.  Dimensional Changes in CFRP/PMI Foam Core Sandwich Structures , 2013, Applied Composite Materials.

[37]  Anthony M. Waas,et al.  Experimental and numerical study on the low-velocity impact behavior of foam-core sandwich panels , 2013 .

[38]  Wesley J. Cantwell,et al.  The low velocity impact response of foam-based sandwich panels , 2012 .

[39]  Stefanie Feih,et al.  Experimental analysis of the through-thickness compression properties of z-pinned sandwich composites , 2011 .

[40]  Kyle C. Indermuehle,et al.  Numerical simulation of the crushing process of a corrugated composite plate , 2011 .

[41]  D. Borst,et al.  Analysis of fracture and delamination in laminates using 3D numerical modelling , 2009 .

[42]  Ole Thybo Thomsen,et al.  Sandwich Materials for Wind Turbine Blades — Present and Future , 2009 .

[43]  Q.M. Li,et al.  Degradation of Elastic Modulus of Progressively Crushable Foams in Uniaxial Compression , 2008 .

[44]  Lorenzo Iannucci,et al.  Fracture toughness of the tensile and compressive fibre failure modes in laminated composites , 2006 .

[45]  Fang Liu,et al.  Influence of the strain rate on the uniaxial tensile behavior of 4-step 3D braided composites , 2005 .

[46]  Raymond G. Boeman,et al.  Strain rate effects on the mechanical properties of polymer composite materials , 2004 .

[47]  H. Dell,et al.  A comprehensive failure model for crashworthiness simulation of aluminium extrusions , 2004 .

[48]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[49]  Alastair Johnson,et al.  Modelling fabric reinforced composites under impact loads , 2001 .

[50]  C. Ruiz,et al.  Measurement of the properties of woven CFRP T300/914 at different strain rates , 2000 .

[51]  A. G. Gibson,et al.  Low velocity perforation behaviour of polymer composite sandwich panels , 1998 .

[52]  M. Richardson,et al.  Review of low-velocity impact properties of composite materials , 1996 .

[53]  M. Benzeggagh,et al.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .