ELECTRICAL COMPONENTS FOR A FULLY IMPLANTABLE NEURAL RECORDING SYSTEM

The human brain has long been a subject of study and fascination. There are certain tasks for which our brains vastly outperform inanimate machines, and the brain is very computationally efficient, dissipating 12 W of power versus > 50 W of power for a modern microprocessor. A better understanding of how the brain functions has the potential to advance many branches of engineering. In recent years, the advent of microelectrode arrays has allowed researchers to begin understanding how the brain processes information. These arrays allow long-term simultaneous recording of neural activity from many neurons simultaneously. The ideal system for long-term multiunit recording would be a fully implantable device which is capable of amplifying the neural signals and transmitting them to the outside world. This work investigates several of the building blocks necessary for the micro-electronic components of such a system. An overview is given of the components and requirements for a fully implantable recording system. The bias circuitry for the electronics of a fully implantable recording system is designed and implemented. This is done by surveying a number of designs for each circuit component, evaluating each design against the requirements for a fully implantable recording system, and then choosing the most suitable topology for design and implementation. We also design and test a fully differential low-noise amplifier for use in these systems. The amplifier is based on a previously reported single-ended version, and has the advantage of rejecting interference caused by the digital circuitry of the recording system. The fully differential amplifier is implemented with three different common mode feedback circuits. Two common mode feedback circuits are standard designs, and the third is a novel design based on floating gates. The floating gate common mode feedback circuit combines the advantages of the two tested standard common mode feedback circuits, by combining a large allowable output signal swing with continuous time operation.

[1]  R. Cobbold.  Transducers for Biomedical Measurements , 1978 .

[2]  M. Degrauwe,et al.  A Micropower CMOS-Instrumentation Amplifier , 1985, IEEE Journal of Solid-State Circuits.

[3]  Gabriel A. Rincon-Mora,et al.  A 1.1-V current-mode and piecewise-linear curvature-corrected bandgap reference , 1998, IEEE J. Solid State Circuits.

[4]  Qing Bai,et al.  Single-unit neural recording with active microelectrode arrays , 2001, IEEE Transactions on Biomedical Engineering.

[5]  Eric A. Vittoz,et al.  CMOS voltage references using lateral bipolar transistors , 1985 .

[6]  Alan B. Grebene,et al.  Analog Integrated Circuit Design , 1978 .

[7]  R. Castello,et al.  A Floating CMOS Bandgap Voltage Reference For Differential Applications , 1988, ESSCIRC '88: Fourteenth European Solid-State Circuits Conference.

[8]  R. R. Harrison,et al.  A floating gate common mode feedback circuit for low noise amplifiers , 2003, Southwest Symposium on Mixed-Signal Design, 2003..

[9]  S. Shamma,et al.  A tantalum-on-sapphire microelectrode array , 1979, IEEE Transactions on Electron Devices.

[10]  C.A. Laber,et al.  A family of differential NMOS analog circuits for a PCM codec filter chip , 1982, IEEE Journal of Solid-State Circuits.

[11]  T. Kwan,et al.  An adaptive analog continuous-time CMOS biquadratic filter , 1991 .

[12]  Willy Sansen,et al.  A CMOS temperature-compensated current reference , 1988 .

[13]  M. Hull,et al.  A new technique for transmission of signals from implantable transducers , 1998, IEEE Transactions on Biomedical Engineering.

[14]  R. Castello,et al.  A high-performance micropower switched-capacitor filter , 1985, IEEE Journal of Solid-State Circuits.

[15]  Shigetaka Takagi,et al.  Common-mode feedback circuit with differential-difference amplifier , 1994 .

[16]  K. Sakui,et al.  A CMOS bandgap reference circuit with sub-1-V operation , 1999 .

[17]  Sung June Kim,et al.  Noise performance design of CMOS preamplifier for the active semiconductor neural probe , 2000, IEEE Trans. Biomed. Eng..

[18]  Khalil Najafi,et al.  A new dc baseline stabilization scheme for neural recording microprobes , 1999, Proceedings of the First Joint BMES/EMBS Conference. 1999 IEEE Engineering in Medicine and Biology 21st Annual Conference and the 1999 Annual Fall Meeting of the Biomedical Engineering Society (Cat. N.

[19]  M. M. Green,et al.  An approach to fully differential circuit design without common-mode feedback , 1996 .

[20]  K. Wise,et al.  A three-dimensional microelectrode array for chronic neural recording , 1994, IEEE Transactions on Biomedical Engineering.

[21]  K. Wise,et al.  An implantable CMOS circuit interface for multiplexed microelectrode recording arrays , 1992 .

[22]  N. Donaldson,et al.  Passive signalling via inductive coupling , 1986, Medical and Biological Engineering and Computing.

[23]  Reid R. Harrison,et al.  A CMOS programmable analog memory-cell array using floating-gate circuits , 2001 .

[24]  Christofer Toumazou,et al.  A resistorless low current reference circuit for implantable devices , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).

[25]  Kensall D. Wise,et al.  A Low-Capacitance Multielectrode Probe for Use in Extracellular Neurophysiology , 1975, IEEE Transactions on Biomedical Engineering.

[26]  K. S Guillory,et al.  A 100-channel system for real time detection and storage of extracellular spike waveforms , 1999, Journal of Neuroscience Methods.

[27]  L. L. Howard,et al.  Description and demonstration of a CMOS amplifier-based-system with measurement and stimulation capability for bioelectrical signal transduction. , 1998, Biosensors & bioelectronics.

[28]  Willy Sansen,et al.  Micropower high-performance SC building block for integrated low-level signal processing , 1985 .

[29]  Babak Ziaie,et al.  A self-oscillating detuning-insensitive class-E transmitter for implantable microsystems , 2001, IEEE Transactions on Biomedical Engineering.

[30]  Yael Nemirovsky,et al.  1/f Noise in CMOS transistors for analog applications from subthreshold to saturation , 1998 .

[31]  C.M. Zierhofer,et al.  High-efficiency coupling-insensitive transcutaneous power and data transmission via an inductive link , 1990, IEEE Transactions on Biomedical Engineering.

[32]  C.A.T. Salama,et al.  A CMOS bandgap voltage reference , 1979, IEEE Journal of Solid-State Circuits.

[33]  J. N. Babanezhad.  A low-output-impedance fully differential op amp with large output swing and continuous-time common-mode feedback , 1991 .

[34]  R. White,et al.  A Wide-Band Efficient Inductive Transdennal Power and Data Link with Coupling Insensitive Gain , 1987, IEEE Transactions on Biomedical Engineering.

[35]  P.R. Gray,et al.  A precision curvature-compensated CMOS bandgap reference , 1983, IEEE Journal of Solid-State Circuits.

[36]  Erwin S. Hochmair,et al.  System Optimization for Improved Accuracy in Transcutaneous Signal and Power Transmission , 1984, IEEE Transactions on Biomedical Engineering.

[37]  John Choma,et al.  A continuous-time common-mode feedback circuit (CMFB) for high-impedance current-mode applications , 2000 .

[38]  Carver A. Mead,et al.  Analog VLSI adaptive logarithmic wide-dynamic-range photoreceptor , 1994 .

[39]  D. Robinson,et al.  The electrical properties of metal microelectrodes , 1968 .

[40]  Krishnaswamy Nagaraj,et al.  A low supply voltage high PSRR voltage reference in CMOS process , 1995, IEEE J. Solid State Circuits.

[41]  J. F. Duque-Carrillo.  Control of the common-mode component in CMOS continuous-time fully differential signal processing , 1993 .

[42]  H. Oguey,et al.  CMOS Current Reference without Resistance , 1996, ESSCIRC '96: Proceedings of the 22nd European Solid-State Circuits Conference.

[43]  Khalil Najafi,et al.  A low power fully integrated bandpass operational amplifier for biomedical neural recording applications , 2002, Proceedings of the Second Joint 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society] [Engineering in Medicine and Biology.

[44]  K. Lee.  Low-destortion switched-capacitor filter design techniques , 1985 .

[45]  Wentai Liu,et al.  A multi channel chopper modulated neural recording system , 2001, 2001 Conference Proceedings of the 23rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[46]  J. Silva-Martinez,et al.  Design techniques for high-performance full-CMOS OTA-RC continuous-time filters , 1992, IEEE Journal of Solid-State Circuits.

[47]  Reid R. Harrison,et al.  A low-power, low-noise CMOS amplifier for neural recording applications , 2002, 2002 IEEE International Symposium on Circuits and Systems. Proceedings (Cat. No.02CH37353).

[48]  Mani Soma,et al.  Radio-Frequency Coils in Implantable Devices: Misalignment Analysis and Design Procedure , 1987, IEEE Transactions on Biomedical Engineering.

[49]  H. K. Charles,et al.  Multisite microprobes for neural recordings , 1991, IEEE Transactions on Biomedical Engineering.

[50]  Y. Tsividis.  Operation and modeling of the MOS transistor , 1987 .

[51]  W.M.C. Sansen,et al.  A micropower low-noise monolithic instrumentation amplifier for medical purposes , 1987 .

[52]  Kensall D. Wise,et al.  Silicon neural recording arrays with on-chip electronics for in-vivo data acquisition , 2002, 2nd Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology. Proceedings (Cat. No.02EX578).

[53]  Eric A. Vittoz.  The Design of High-Performance Analog Circuits on Digital CMOS Chips , 1985 .

[54]  Yannis Tsividis,et al.  Fully differential operational amplifiers with accurate output balancing , 1988 .

[55]  Satoshi Kawata,et al.  An implantable power supply with an optically rechargeable lithium battery , 2001, IEEE Transactions on Biomedical Engineering.

[56]  K. Wise,et al.  A high-yield IC-compatible multichannel recording array , 1985, IEEE Transactions on Electron Devices.

[57]  K. Wise,et al.  An implantable multielectrode array with on-chip signal processing , 1986 .

[58]  T. G. Barnett,et al.  A low-noise optically isolated preamplifier for use with extracellular microelectrodes , 1994, Journal of Neuroscience Methods.

[59]  P. H. Peckham,et al.  Data transmission from an implantable biotelemeter by load-shift keying using circuit configuration modulator , 1995 .