Emulation-based robustness assessment for automotive smart-power ICs

In this paper we present a concept for assessing the robustness of automotive smart power ICs through lab measurements with respect to application variance and parameter spread. Classical compliance to the product specification, where only minimum and maximum values are defined, is not enough to assess device robustness since complex transients of application components cannot be defined within single specification parameters. That is why application fitness becomes a necessary task to reduce device failures, which may occur in the application. One solution would be to enhance traditional lab verification methods with a concept that considers application and parameter spread. This innovative concept is demonstrated on an electronic throttle control application. It has been emulated in real-time, including power amplification and application-relevant parameters. Monte Carlo experiments were carried out within the application space to evaluate the influence of parameter spread on selected system characteristics. Finally, an appropriate metric was used to quantify the robustness of the micro-electronic device within its application.

[1]  Georg Pelz,et al.  Verification of an Automotive Headlight Leveling Circuit and Application Using Smart Component Property Extraction , 2008, 2008 IEEE International Behavioral Modeling and Simulation Workshop.

[2]  G. Pelz,et al.  Application-oriented robustness optimization based on metamodels , 2012, 2012 IEEE 18th International Symposium for Design and Technology in Electronic Packaging (SIITME).

[3]  Yi-Hsuan Hung,et al.  Development of a hardware in-the-loop platform for plug-in hybrid electric vehicles , 2010, 2010 International Symposium on Computer, Communication, Control and Automation (3CA).

[4]  A. Pirker-Fruhauf,et al.  A novel methodology to combine and speed-up the verification process of simulation and measurement of integrated circuits , 2008, 2008 IEEE AUTOTESTCON.

[5]  Christoph Grimm,et al.  Monte Carlo based post-silicon verification considering automotive application variances , 2013, Proceedings of the 2013 9th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME).

[6]  K. Krischan,et al.  Emulator for a DC-Machine, working as an actuator in a torque split unit of an all-wheel driven automobile , 2007, 2007 European Conference on Power Electronics and Applications.

[7]  D. Rodriguez,et al.  Automated Hardware-in-the-Loop Modeling and Simulation in Active Sensor Imaging Using T16713 DSP Units , 2006, 2006 49th IEEE International Midwest Symposium on Circuits and Systems.

[8]  Helmut Graeb,et al.  PRACTICAL METHODS FOR WORST-CASE AND YIELD ANALYSIS OF ANALOG INTEGRATED CIRCUITS , 1993 .

[9]  Georg Pelz,et al.  Configurable load emulation using FPGA and power amplifiers for automotive power ICs , 2012, Proceeding of the 2012 Forum on Specification and Design Languages.

[10]  Lin Yang,et al.  The Development of A Real-Time Hardware-in-the-Loop Test Bench for Hybrid Electric Vehicles Based on Multi-Thread Technology , 2006, 2006 IEEE International Conference on Vehicular Electronics and Safety.

[11]  Andrew J. Forsyth,et al.  HIL emulation of all-electric UAV power systems , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[12]  O Vodyakho,et al.  Implementation of a virtual induction machine test bed utilizing the power hardware-in-the-loop concept , 2011, 2011 IEEE Electric Ship Technologies Symposium.

[13]  Monica Rafaila,et al.  Planning Experiments for the Validation of Electronic Control Units , 2011 .

[14]  M. Chandorkar,et al.  Electrical load emulation using power electronic converters , 2008, TENCON 2008 - 2008 IEEE Region 10 Conference.

[15]  Dhiraj K. Pradhan,et al.  Design Automation and Test in Europe (DATE) , 2014 .

[16]  Mukul Chandorkar,et al.  Rapid prototyping tool for electrical load emulation using power electronic converters , 2009, 2009 IEEE Symposium on Industrial Electronics & Applications.

[17]  Cheng Lin,et al.  Hardware-in-the-loop simulation and its application in electric vehicle development , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[18]  A. Griffo,et al.  Hardware in the loop emulation of synchronous generators for aircraft power systems , 2012, 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion.

[19]  Lucia Gauchia,et al.  A Per-Unit Hardware-in-the-Loop Simulation of a Fuel Cell/Battery Hybrid Energy System , 2010, IEEE Transactions on Industrial Electronics.

[20]  Stefan Jakubek,et al.  Battery Emulation for Power-HIL Using Local Model Networks and Robust Impedance Control , 2014, IEEE Transactions on Industrial Electronics.

[21]  Helmut Graeb,et al.  Circuit optimization driven by worst-case distances , 1991, 1991 IEEE International Conference on Computer-Aided Design Digest of Technical Papers.