Micromechanic modeling and analysis of the flow regimes in horizontal pneumatic conveying

Pneumatic conveying is an important technology for industries to transport bulk materials from one location to another. Different flow regimes have been observed in such transportation processes, but the underlying fundamentals are not clear. This article presents a three-dimensional (3-D) numerical study of horizontal pneumatic conveying by a combined approach of discrete element model for particles and computational fluid dynamics for gas. This particle scale, micromechanic approach is verified by comparing the calculated and measured results in terms of particle flow pattern and gas pressure drop. It is shown that flow regimes usually encountered in horizontal pneumatic conveying, including slug flow, stratified flow, dispersed flow and transition flow between slug flow and stratified flow, and the corresponding phase diagram can be reproduced. The forces governing the behavior of particles, such as the particle–particle, particle-fluid and particle-wall forces, are then analyzed in detail. It is shown that the roles of these forces vary with flow regimes. A general phase diagram in terms of these forces is proposed to describe the flow regimes in horizontal pneumatic conveying. © 2011 American Institute of Chemical Engineers AIChE J, 2011

[1]  Sean McNamara,et al.  Plug conveying in a horizontal tube , 2005 .

[2]  Soumya Suddha Mallick,et al.  Minimum transport boundaries for pneumatic conveying of powders , 2009 .

[3]  K. Nakamura,et al.  Vertical pneumatic conveying: A theoretical study of uniform and annular particle flow models , 1973 .

[4]  Shigeru Matsumoto,et al.  Statistical analysis of the transition of the flow pattern in vertical pneumatic conveying , 1987 .

[5]  Aibing Yu,et al.  CFD-DEM modelling of multiphase flow in dense medium cyclones , 2009 .

[6]  Tom Dyakowski,et al.  Solids deposition in low-velocity slug flow pneumatic conveying , 2003 .

[7]  A. Gosman,et al.  Aspects of Computer Simulation of Liquid-Fueled Combustors , 1983 .

[8]  George E. Klinzing,et al.  ANALYSIS OF UNSTABLE BEHAVIOR OF PNEUMATIC CONVEYING SYSTEMS , 1999 .

[9]  Tomasz Dyakowski,et al.  Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system , 2001 .

[10]  Hsiaotao Bi,et al.  Types of choking in vertical pneumatic systems , 1993 .

[11]  Sankaran Sundaresan,et al.  Gas‐solid flow in vertical tubes , 1991 .

[12]  Ian Lowndes,et al.  Characterisation of the cross sectional particle concentration distribution in horizontal dilute flow conveying—a review , 2004 .

[13]  George E. Klinzing,et al.  An investigation of the prevailing flow patterns and pressure fluctuation near the pressure minimum and unstable conveying zone of pneumatic transport systems , 2000 .

[14]  Aibing Yu,et al.  Discrete element simulation for pneumatic conveying of granular material , 2006 .

[15]  George E. Klinzing,et al.  Pressure Fluctuations in Pneumatic Conveying Systems , 1993 .

[16]  Tomasz Dyakowski,et al.  Applications of electrical tomography for gas-solids and liquid-solids flows : a review , 2000 .

[17]  Yutaka Tsuji,et al.  Multi-scale modeling of dense phase gas–particle flow , 2007 .

[18]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[19]  G. Klinzing,et al.  Dense-phase transport: Vertical plug flow , 1987 .

[20]  Gerhard Niederreiter,et al.  Modeling and experimental validation of pressure drop for pneumatic plug conveying , 2004 .

[21]  D. Mason,et al.  A computational investigation of transient heat transfer in pneumatic transport of granular particles , 2000 .

[22]  Chun Kit Wong,et al.  Pneumatic conveying of granular solids in horizontal and inclined pipes , 2004 .

[23]  Aibing Yu,et al.  Computational investigation of horizontal slug flow in pneumatic conveying , 2008 .

[24]  Benny Kuan,et al.  Application of CFD in the design of a grit collection system for the coal-fired power generation industry , 2007 .

[25]  I. Lecreps,et al.  Stress States and Porosity within Horizontal Slug by Dense-Phase Pneumatic Conveying , 2009 .

[26]  Aibing Yu,et al.  Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics , 1997 .

[27]  Runyu Yang,et al.  Discrete particle simulation of particulate systems: A review of major applications and findings , 2008 .

[28]  Sankaran Sundaresan,et al.  Developing flow of a gas‐particle mixture in a vertical riser , 1993 .

[29]  Ng Niels Deen,et al.  Numerical Simulation of Dense Gas-Solid Fluidized Beds: A Multiscale Modeling Strategy , 2008 .

[30]  Madhumita B. Ray,et al.  Pneumatic transport of granular materials through a 90° bend , 2004 .

[31]  Aibing Yu,et al.  A new point-locating algorithm under three-dimensional hybrid meshes , 2008 .

[32]  A. Yu,et al.  Discrete particle simulation of particulate systems: Theoretical developments , 2007 .

[33]  H. Enwald,et al.  Eulerian two-phase flow theory applied to fluidization , 1996 .

[34]  Aibing Yu,et al.  Computational Study of Flow Regimes in Vertical Pneumatic Conveying , 2009 .

[35]  Yuji Tomita,et al.  WAVELIKE MOTION OF PARTICULATE SLUGS IN A HORIZONTAL PNEUMATIC PIPELINE , 1981 .

[36]  O. Molerus,et al.  Overview: Pneumatic transport of solids , 1996 .

[37]  Yoshinobu Morikawa,et al.  Flow pattern and pressure fluctuation in air-solid two-phase flow in a pipe at low air velocities , 1982 .

[38]  Michel Y. Louge,et al.  The role of particle collisions in pneumatic transport , 1989, Journal of Fluid Mechanics.

[39]  M. C. Ferreira,et al.  Vertical pneumatic conveying in dilute and dense-phase flows: experimental study of the influence of particle density and diameter on fluid dynamic behavior , 2001 .

[40]  Martin Sommerfeld,et al.  Modelling and numerical calculation of dilute-phase pneumatic conveying in pipe systems , 1998 .

[41]  H. P. Zhu,et al.  Discrete particle simulation of gas-solid flow in a blast furnace , 2008, Comput. Chem. Eng..

[42]  George E. Klinzing,et al.  Assessing Flow Regimes from Pressure Fluctuations in Pneumatic Conveying of Polymer Pellets , 2008 .

[43]  John R. Pugh,et al.  An Experimental Technique for the Analysis of Slug Flows in Pneumatic Pipelines Using Pressure Measurements , 2002 .

[44]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[45]  Sankaran Sundaresan,et al.  Electrical capacitance tomography measurements on vertical and inclined pneumatic conveying of granular solids , 2003 .

[46]  Avi Levy,et al.  A comparison of analytical and numerical models with experimental data for gas-solid flow through a straight pipe at different inclinations , 1997 .

[47]  Edward K. Levy,et al.  Formation and dispersion of ropes in pneumatic conveying , 2001 .

[48]  Yutaka Tsuji,et al.  Numerical Analysis of Density Wave in Dense Gas-Solid Flows in a Vertical Pipe , 2000 .

[49]  P. Langston,et al.  Horizontal pneumatic conveying: a 3d distinct element model , 2006 .

[50]  Shrikant Dhodapkar,et al.  Friction measurement in dense phase plug flow analysis , 2003 .

[51]  Kenneth C. Williams,et al.  Predicting the mode of flow in pneumatic conveying systems—A review ☆ , 2008 .

[52]  Jennifer S. Curtis,et al.  Modeling particle‐laden flows: A research outlook , 2004 .

[53]  Sankaran Sundaresan,et al.  Electrical Capacitance Tomography Measurements on the Pneumatic Conveying of Solids , 2001 .

[54]  A. Yu,et al.  Rolling friction in the dynamic simulation of sandpile formation , 1999 .

[55]  Jennifer S. Curtis,et al.  Reynolds number dependence of gas-phase turbulence in gas–particle flows , 2005 .

[56]  Aibing Yu,et al.  Numerical Simulation of the Gas-Solid Flow in Three-Dimensional Pneumatic Conveying Bends , 2008 .

[57]  Martin Strauss,et al.  Plug conveying in a vertical tube , 2004 .

[58]  R. Pan,et al.  Material properties and flow modes in pneumatic conveying , 1999 .

[59]  Madhumita B. Ray,et al.  Dilute Gas-Solid Flows in Horizontal and Vertical Bends , 2005 .

[60]  R. D. Felice,et al.  The voidage function for fluid-particle interaction systems , 1994 .

[61]  Peter W Wypych,et al.  Minimum transport boundary for horizontal dense-phase pneumatic conveying of granular materials , 2003 .

[62]  Xiaoping Chen,et al.  Three‐Dimensional Numerical Simulation of Dense Pneumatic Conveying of Pulverized Coal in a Vertical Pipe at High Pressure , 2008 .

[63]  Shrikant Dhodapkar,et al.  Characterization of bulk solids to assess dense phase pneumatic conveying , 2003 .

[64]  Peter W Wypych,et al.  Pressure drop prediction in low-velocity pneumatic conveying , 1994 .

[65]  Jennifer S. Curtis,et al.  Effect of Interstitial Fluid on Particle-Particle Interactions in Kinetic Theory Approach of Dilute Turbulent Fluid-Particle Flow , 2004 .

[66]  Shrikant Dhodapkar,et al.  Evaluation of models and correlations for pressure drop estimation in dense phase pneumatic conveying and an experimental analysis , 2005 .

[67]  M. G. Jones,et al.  Stress-Field Modeling and Pressure Drop Prediction for Slug-Flow Pneumatic Conveying in an Aerated Radial Stress Chamber , 2004 .

[68]  Masahiro Takei,et al.  Image extraction of particle concentration at the plug front using 3D wavelets and comparison with LDV , 2004 .

[69]  M. Nowak,et al.  Wall shear stress measurement in a turbulent pipe flow using ultrasound Doppler velocimetry , 2002 .

[70]  Morten Christian Melaaen,et al.  A Unified Scaling-Up Technique for Pneumatic Conveying Systems , 2007 .

[71]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .