Analysis and experiments of a novel and compact 3-DOF precision positioning platform

A novel 3-DOF precision positioning platform with dimensions of 48 mm×50 mm×35 mm was designed by integrating piezo actuators and flexure hinges. The platform has a compact structure but it can do high precision positioning in three axes. The dynamic model of the platform in a single direction was established. Stiffness of the flexure hinges and modal characteristics of the flexure hinge mechanism were analyzed by the finite element method. Output displacements of the platform along three axes were forecasted via stiffness analysis. Output performance of the platform in x and y axes with open-loop control as well as the z-axis with closed-loop control was tested and discussed. The preliminary application of the platform in the field of nanoindentation indicates that the designed platform works well during nanoindentation tests, and the closed-loop control ensures the linear displacement output. With suitable control, the platform has the potential to realize different positioning functions under various working conditions.

[1]  Dongwoo Kang,et al.  Design and control of flexure based XYϑZ stage , 2005 .

[2]  Yangmin Li,et al.  A general dynamics and control model of a class of multi-DOF manipulators for active vibration control , 2011 .

[3]  Qingsong Xu,et al.  A Totally Decoupled Piezo-Driven XYZ Flexure Parallel Micropositioning Stage for Micro/Nanomanipulation , 2011, IEEE Transactions on Automation Science and Engineering.

[4]  Yangmin Li,et al.  A Compliant Parallel XY Micromotion Stage With Complete Kinematic Decoupling , 2012, IEEE Transactions on Automation Science and Engineering.

[5]  Hongwei Zhao,et al.  Effect of residual chips on the material removal process of the bulk metallic glass studied by in situ scratch testing inside the scanning electron microscope , 2012 .

[6]  Zhaowei Zhong,et al.  Development of a micro-displacement table for ultra-precision machining and grinding for curved surfaces by the use of it , 1992 .

[7]  N. Choi,et al.  Development of a precision indentation and scratching system with a tool force and displacement control module. , 2007, The Review of scientific instruments.

[8]  Deok-Ho Kim,et al.  Design and performance evaluation of a 3-DOF mobile microrobot for micromanipulation , 2003 .

[9]  J. Michler,et al.  Investigation of wear mechanisms through in situ observation during microscratching inside the scanning electron microscope , 2005 .

[10]  Yung-Tien Liu,et al.  A 3-DOF Rotational Precision Positioning Stage using Spring-mounted PZT Actuators , 2007 .

[11]  Hu Huang,et al.  A novel and compact nanoindentation device for in situ nanoindentation tests inside the scanning electron microscope , 2012 .

[12]  Qiang Liu,et al.  Multi-objective optimum design of fast tool servo based on improved differential evolution algorithm , 2011 .

[13]  Seiichi Hata,et al.  A piezo-driven compliant stage with double mechanical amplification mechanisms arranged in parallel , 2010 .

[14]  P. R. Ouyang,et al.  Micro-motion devices technology: The state of arts review , 2008 .

[15]  Essam Shehab,et al.  A linear piezo-electric ultrasonic motor using a single flexural vibrating bar for electro-discharge system industrial applications , 2009 .

[16]  Zhaojun Yang,et al.  Experimental research on a modular miniaturization nanoindentation device. , 2011, The Review of scientific instruments.

[17]  Xin-Jun Liu,et al.  A three translational DoFs parallel cube-manipulator , 2003, Robotica.

[18]  Qingsong Xu,et al.  Design and Development of a Flexure-Based Dual-Stage Nanopositioning System With Minimum Interference Behavior , 2012, IEEE Transactions on Automation Science and Engineering.

[19]  Woo Chun Choi,et al.  Optimal design of a flexure-hinge precision stage with a lever , 2007 .

[20]  J. Michler,et al.  In situ nanoindentation in the TEM , 2007 .

[21]  R. Thalmann,et al.  Long-range AFM profiler used for accurate pitch measurements , 1998 .

[22]  Qingsong Xu,et al.  New Flexure Parallel-Kinematic Micropositioning System With Large Workspace , 2012, IEEE Transactions on Robotics.

[23]  B. Shirinzadeh,et al.  Design and dynamics of a 3-DOF flexure-based parallel mechanism for micro/nano manipulation , 2010 .

[24]  David Zhang,et al.  Dynamic modelling of a flexure-based mechanism for ultra-precision grinding operation , 2011 .

[25]  Larry L. Howell,et al.  An XYZ Micromanipulator with three translational degrees of freedom , 2006, Robotica.

[26]  Yanling Tian,et al.  A flexure-based five-bar mechanism for micro/nano manipulation , 2009 .

[27]  M. Lagally,et al.  Flexural-hinge guided motion nanopositioner stage for precision machining : Finite element simulations , 2001 .

[28]  Bijan Shirinzadeh,et al.  Development of a novel flexure-based microgripper for high precision micro-object manipulation , 2009 .

[29]  Michael Goldfarb,et al.  Modeling Piezoelectric Stack Actuators for Control of Mlcromanlpulatlon , 2022 .