Evaluation of fatigue damage using nonlinear guided waves

This research develops an experimental procedure for characterizing fatigue damage in metallic plates using nonlinear guided waves. The work first considers the propagation of nonlinear waves in a dispersive medium and determines the theoretical and practical considerations for the generation of higher order harmonics in guided waves. By using results from the nonlinear optics literature, it is possible to demonstrate that both phase and group velocity matching are essential for the practical generation of nonlinear guided elastic waves. Next, the normalized acoustic nonlinearity of low cycle fatigue damaged aluminum specimens is measured with Lamb waves. A pair of wedge transducers is used to generate and detect the fundamental and second harmonic Lamb waves. The results show that the normalized acoustic nonlinearity measured with Lamb waves is directly related to fatigue damage in a fashion that is similar to the behavior of longitudinal and Rayleigh waves. This normalized acoustic nonlinearity is then compared with the measured cumulative plastic strain to confirm that these two parameters are related, and to reinforce the notion that Lamb waves can be used to quantitatively assess plasticity driven fatigue damage using established higher harmonic generation techniques.

[1]  L. Jacobs,et al.  Evaluation of plasticity driven material damage using Lamb waves , 2007 .

[2]  Laurence J. Jacobs,et al.  Acoustic Nonlinearity Parameter Due to Microplasticity , 2006 .

[3]  J. Cantrell.  Substructural organization, dislocation plasticity and harmonic generation in cyclically stressed wavy slip metals , 2004, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[4]  Ping Wang,et al.  Experimental verification of cumulative growth effect of second harmonics of Lamb wave propagation in an elastic plate , 2005 .

[5]  J Jarzynski,et al.  Time-frequency representations of Lamb waves. , 2001, The Journal of the Acoustical Society of America.

[6]  M. Deng.  Cumulative second-harmonic generation of Lamb-mode propagation in a solid plate , 1999 .

[7]  Daniel J. Barnard,et al.  Acoustic harmonic generation due to thermal embrittlement of inconel 718 , 1997 .

[8]  M. Deng.  Analysis of second-harmonic generation of Lamb modes using a modal analysis approach , 2003 .

[9]  Laurence J. Jacobs,et al.  Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves , 2006 .

[10]  L. Jacobs,et al.  Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves , 2006 .

[11]  Kazuo Kuroda,et al.  Group-velocity-matched noncollinear second-harmonic generation in quasi-phase matching , 2005 .

[12]  Martin M. Fejer,et al.  Ultrashort-pulse second-harmonic generation with longitudinally nonuniform quasi-phase-matching gratings: pulse compression and shaping , 2000 .

[13]  Laurence J. Jacobs,et al.  Nonlinear Lamb waves for the detection of material nonlinearity , 2008 .

[14]  William T. Yost,et al.  Nonlinear ultrasonic characterization of fatigue microstructures , 2001 .

[15]  Theodore E. Matikas,et al.  In-situ monitoring of acoustic linear and nonlinear behavior of titanium alloys during cycling loading , 1999, Smart Structures.

[16]  Mark F. Hamilton,et al.  Finite-amplitude waves in isotropic elastic plates , 2003 .

[17]  M. Downer,et al.  Phase and group velocity matching for second harmonic generation of femtosecond pulses. , 1990, Applied optics.

[18]  M. Deng,et al.  Assessment of accumulated fatigue damage in solid plates using nonlinear Lamb wave approach , 2007 .

[19]  Alexander Figotin,et al.  Nonlinear photonic crystals: I. Quadratic nonlinearity , 2001 .

[20]  M. Deng,et al.  Experimental observation of cumulative second-harmonic generation of Lamb-wave propagation in an elastic plate , 2005 .

[21]  C. Bermes,et al.  Experimental characterization of material nonlinearity using Lamb waves , 2007 .

[22]  Laurence J. Jacobs,et al.  A nonlinear-guided wave technique for evaluating plasticity-driven material damage in a metal plate , 2009 .