Improving inverter efficiency at low power by reducing switching frequency

The inverter is a major component of a renewable energy system and its performance affects the overall performance of the system. For typical household applications in remote areas, often there is need to operate at low power conditions where inverter efficiency can drop dramatically. Efficient operation at low power is important especially for stand-alone applications in developing countries where system cost must be kept low. In this paper, we investigated the impact of switching frequency upon switching loss for a single-phase Sinusoidal Pulse Width Modulation (SPWM) inverter. Results show that reducing the switching frequency reduces switching loss at low power levels thus improving inverter efficiency. This may result in a reduced PV module size requirement and thus lower system cost. In addition, efficient low power inverters would allow the continued operation of essential lighting when the battery bank is nearly discharged. A mathematical model is given to calculate the major loss components (i.e. switching loss, conduction loss) in the system. The inverter is operated in the range of 200W rated power to 9W (4.5 % of the rated power) along with the change in frequency from 20 kHz to 200 Hz.

[1]  Jianping Ying,et al.  Analysis and Implementation of LLC Burst Mode for Light Load Efficiency Improvement , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[2]  J Hoon Lee,et al.  Large Time-Scale ElectroThermal Simulation for Loss and Thermal Management of Power MOSFET , 2003 .

[3]  I. Batarseh,et al.  Power losses estimation platform for power converters , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[4]  R.W. Erickson,et al.  Prediction of switching loss variations by averaged switch modeling , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[5]  Haibing Hu,et al.  Efficiency improvement of grid-tied inverters at low input power using pulse skipping control strategy , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[6]  Mr K Y Chung,et al.  Standards of Power Quality with reference to the Code of Practice for Energy Efficiency of Electrical Installations , 2003 .

[7]  E Elusakin Julius,et al.  Challenges of sustaining off-grid power generation in Nigeria rural communities , 2014 .

[8]  Min Chen,et al.  An optimal control method for grid-connected photovoltaic micro-inverter to improve the efficiency at light-load condition , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[9]  Z.J. Shen,et al.  New Physical Insights on Power MOSFET Switching Losses , 2009, IEEE Transactions on Power Electronics.

[10]  M.H. Bierhoff,et al.  Semiconductor losses in voltage source and current source IGBT converters based on analytical derivation , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[11]  J. H. Lee,et al.  Large time-scale electro-thermal simulation for loss and thermal management of power MOSFET , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[12]  Yung-Ruei Chang,et al.  Design of High-Performance Stand-Alone and Grid-Connected Inverter for Distributed Generation Applications , 2013, IEEE Transactions on Industrial Electronics.

[13]  J. Marvin,et al.  Semiconductor power losses in AC inverters , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[14]  Prashant Sonare,et al.  Design and Implementation of carrier based Sinusoidal PWM Inverter , 2012 .

[15]  Ugur Savas Selamogullari,et al.  Hybrid switch use for light load efficiency improvement of a power inverter for stand-alone residential renewable energy system , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[16]  Kamalakanta Mahapatra,et al.  Power Loss Estimation for PWM and Soft-switching Inverter using RDCLI , 2010 .